What is true about backboards? (check all that apply)

Their recommended thickness is 3/4"

They should be painted with fire retardant paint on one side

They can have a minimum of 15% voids (empty spaces

What is true about installing backboard? (check all that apply)

The C side of the A/C plywood should be placed against the wall

There can be a small space in the corner behind where two backboards meet

Must use galvanized screws that are flush with the surface of the board

Toggle bolts are used in the metal wall studs

Test

Roger Smith 4 preguntas

Hacer el test

Este test tiene tipos de pregunta que se abren en el reproductor de siempre.

1What is true about backboards? (check all that apply)
1. AThey should be painted with fire retardant paint on one side
2. BThey should measure 4' x 8'
3. CTheir recommended thickness is 3/4"
4. DThey can have a minimum of 15% voids (empty spaces
2What is true about installing backboard? (check all that apply)
1. AThere can be a small space in the corner behind where two backboards meet
2. BMust use galvanized screws that are flush with the surface of the board
3. CToggle bolts are used in the metal wall studs
4. DThe C side of the A/C plywood should be placed against the wall
3
What is the size of one RMU? How many patch panel ports does one RMU typically contain? [blank_start]1.75", 24 ports[blank_end]
1. A1.75", 24 ports
4What can you use to support small bundles of cables on the backboard (list 2)? [blank_start]D ring, spool[blank_end]
1. AD ring, spool

Descripción: cabling network cabling Test sobre Space Prep, creado por Roger Smith el 16/07/2020.
Autor: Roger Smith
Idioma: English
Visitas: 0
Etiquetas: network cablingcabling
Valoración: Aún sin valoraciones
Valora este test
Valora este test