Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Test

Pulleys and belts: power transmission and belt drives

Iker Diaz Bravo 20 preguntas

Hacer el test

Este test tiene tipos de pregunta que se abren en el reproductor de siempre.

Preguntas del test (20)

  1. 1 Illustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys dont rotate in the same direction.

    Imagen de la pregunta 1
    1. AVerdadero
    2. BFalso
  2. 2.Differs from in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed?Imagen de la pregunta 2
    1. AYes
    2. Bnot
    3. CWe dont know?
  3. 33. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are [blank_start]two[blank_end] of these pulleys, side by side, one for each leaf of the belt.

    Imagen de la pregunta 3
    1. Amethod
    2. Btwo
  4. 44. A [blank_start]method[blank_end] of transmitting motion from a shaft at right angles to another whose axis is in the same plane. This is shown with a crossed belt. An open belt may be used, but the crossed one is preferable, as it gives more surface of [blank_start]contact[blank_end].

    Imagen de la pregunta 4
    1. Amethod
    2. BForm
    3. Ccontact
    4. Dtransmition
  5. 54. A method of transmitting ________ from a shaft at right angles to another whose axis is in the same plane.Imagen de la pregunta 5
    1. Arotation
    2. Bmovation
  6. 66. By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

    Chose the correct image
    1. AImagen de la opción A
    2. BImagen de la opción B
    3. CImagen de la opción C
  7. 7it is made by pulleys?Imagen de la pregunta 7
    1. AVerdadero
    2. BFalso
  8. 8A method of engaging, disengaging, and reversing the upright shaft at the left. The belt is shown on the middle one of the three pulleys on the lower shafts, a, b, which pulley is loose, and consequently no movement is communicated to the said shafts. When the belt is traversed on the left-hand pulley, which is fast on the hollow shaft, b, carrying the bevel-gear, B, motion is communicated in one direction to the upright shaft; and on its being traversed on to the right-hand pulley, motion is transmitted through the gear, A, fast on the shaft, a, which runs inside of b, and the direction of the upright shaft is reversed.
    chose the correct image to the definition
    1. AImagen de la opción A
    2. BImagen de la opción B
  9. 9chose the correct immage acorrding the definiton
    Speed-pulleys used for lathes and other mechanical tools, for varying the speed according to the work operated upon.

    1. AImagen de la opción A
    2. BImagen de la opción B
  10. 10Cone-pulleys for the same purpose as 10. This motion is used in cotton machinery, and in all machines which are required to run with a gradually increased or diminished speed.

    1. AVerdadero
    2. BFalso

Información

Descripción
Test sobre Sin título, creado por Iker Diaz Bravo el 29/10/2021.
Idioma
Español
Visitas
11
Valoración
Aún sin valoraciones
Valora este test
Valora este test

Más sobre Gears, Pulleys and Belt Drives

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?