¡GoConqr estrena diseño! Cuéntanos qué te parece.

Test

Chapter 13 - Quiz

Neil Revollo 20 preguntas

Hacer el test

Preguntas del test (20)

  1. 1If properly designed, a closed-loop hydronic system should rid itself of most air within a few days of initial start-up.
    1. AVerdadero
    2. BFalso
  2. 2The oxygen that causes corrosion is the same oxygen that forms water molecules.
    1. AVerdadero
    2. BFalso
  3. 3Circulators transfer maximum head energy to incompressible fluids (e.g., liquids). A mixture of water and air is an example of an incompressible fluid.
    1. AVerdadero
    2. BFalso
  4. 4Air has much lower specific heat and density than water.
    1. AVerdadero
    2. BFalso
  5. 5Circulators with internal spring-load check valves installed in vertical piping with upward flow are especially susceptible to air pockets.
    1. AVerdadero
    2. BFalso
  6. 6Although water may appear perfectly clear and free of bubbles, it can still contain a significant quantity of air in solution.
    1. AVerdadero
    2. BFalso
  7. 7Combined air and dirt separators, or a hydraulic separator with the same capabilities, are never desirable in situations where an older distribution system containing steel or iron piping or radiators will be interfaced to a new boiler.
    1. AVerdadero
    2. BFalso
  8. 8Properly designed and installed hydronic systems will always require constant manual air venting.
    1. AVerdadero
    2. BFalso
  9. 9Low system pressurization is usually caused by not setting the make-up water system properly.
    1. AVerdadero
    2. BFalso
  10. 10Glycol-based antifreezes tend to leave a slippery film on components and tools that eventually turn sticky.
    1. AVerdadero
    2. BFalso

Información

Descripción
Air Removal, Filling, and Purging
Idioma
English
Visitas
207
Valoración
Aún sin valoraciones
Valora este test
Valora este test

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?