Test
VLAN configuration on Cisco switches: trunks and security
Crea una cuenta gratis para terminar este test
Guarda tu progreso y consulta tu resultado final.
¿Ya tienes cuenta? Inicia sesión
Preguntas del test (22)
1
Which two Layer 2 security best practices would help prevent VLAN hopping attacks? (Choose two.)- AChange the native VLAN number to one that is distinct from all user VLANs and is not VLAN 1.
- BStatically configure all ports that connect to end-user host devices to be in trunk mode.
- CChange the management VLAN to a distinct VLAN that is not accessible by regular users
- DDisable DTP autonegotiation on end-user ports.
- EUse SSH for all remote management access.
2Which command should the network administrator implement to prevent the transfer of DTP frames between a Cisco switch and a non-Cisco switch?
- AS1(config-if)# switchport nonegotiate
- BS1(config-if)# switchport mode access
- CS1(config-if)# switchport mode dynamic desirable
- DS1(config-if)# switchport trunk allowed vlan none
- ES1(config-if)# switchport mode trunk
3
Which three statements accurately describe VLAN types? (Choose three).- AVLAN 1 is always used as the management VLAN.
- BA data VLAN is used to carry VLAN management data and user-generated traffic.
- C
A management VLAN is any VLAN that is configured to access management features of the switch. - DAfter the initial boot of an unconfigured switch, all ports are members of the default VLAN.
- EVoice VLANs are used to support user phone and e-mail traffic on a network.
- FAn 802.1Q trunk port, with a native VLAN assigned, supports both tagged and untagged traffic.
4Which command is used to remove only VLAN 20 from a switch?
- Ano switchport access vlan 20
- Bdelete flash:vlan.dat
- C
delete vlan.dat - Dno vlan 20
5Which switch feature ensures that no unicast, multicast, or broadcast traffic is passed between ports that are configured with this feature?
- APVLAN protected port
- B
switch port security - CACL
- DVLAN
6
A Cisco switch currently allows traffic tagged with VLANs 10 and 20 across trunk port Fa0/5. What is the effect of issuing a switchport trunk allowed vlan 30 command on Fa0/5?- A
It allows a native VLAN of 30 to be implemented on Fa0/5. - BIt allows VLANs 1 to 30 on Fa0/5.
- CIt allows only VLAN 30 on Fa0/5.
- DIt allows VLANs 10, 20, and 30 on Fa0/5.
- A
7Refer to the exhibit. PC-A and PC-B are both in VLAN 60. PC-A is unable to communicate with PC-B. What is the problem?

- AThe native VLAN is being pruned from the link.
- BThe VLAN that is used by PC-A is not in the list of allowed VLANs on the trunk.
- C
The trunk has been configured with the switchport nonegotiate command. - DThe native VLAN should be VLAN 60.
8
Which two statements are true about VLAN implementation? (Choose two.)- AVLANs logically group hosts, regardless of physical location.
- BThe size of the collision domain is reduced.
- CThe network load increases significantly because of added trunking information.
- DDevices in one VLAN do not hear the broadcasts from devices in another VLAN.
- EThe number of required switches in a network decreases.
9A Cisco Catalyst switch has been added to support the use of multiple VLANs as part of an enterprise network. The network technician finds it necessary to clear all VLAN information from the switch in order to incorporate a new network design. What should the technician do to accomplish this task?
- A
Delete the IP address that is assigned to the management VLAN and reboot the switch. - BErase the running configuration and reboot the switch.
- C
Delete the startup configuration and the vlan.dat file in the flash memory of the switch and reboot the switch. - DErase the startup configuration and reboot the switch.
- A
10What is the effect of issuing a switchport access vlan 20 command on the Fa0/18 port of a switch that does not have this VLAN in the VLAN database?
- AThe command will have no effect on the switch.
- BVLAN 20 will be created automatically.
- CAn error stating that VLAN 20 does not exist will be displayed and VLAN 20 is not created.
- DPort Fa0/18 will be shut down.
11What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default value?
- A
The switches will negotiate via VTP which VLANs to allow across the trunk. - BAll VLANs will be allowed across the trunk.
- COnly the native VLAN will be allowed across the trunk.
- DOnly VLAN 1 will be allowed across the trunk.
- A
12A network administrator is determining the best placement of VLAN trunk links. Which two types of point-to-point connections utilize VLAN trunking? (Choose two.)
- Abetween two switches that utilize multiple VLANs
- Bbetween a switch and a client PC
- Cbetween a switch and a server that has an 802.1Q NIC
- Dbetween a switch and a network printer
- Ebetween two switches that share a common VLAN
13
Under which two occasions should an administrator disable DTP while managing a local area network? (Choose two.)- Awhen a neighbor switch uses a DTP mode of dynamic auto
- Bwhen a neighbor switch uses a DTP mode of dynamic desirable
- Cwhen connecting a Cisco switch to a non-Cisco switch
- Don links that should not be trunking
- Eon links that should dynamically attempt trunking
14
In a basic VLAN hopping attack, which switch feature do attackers take advantage of?- A
forwarding of broadcasts - Bthe default automatic trunking configuration
- C
automatic encapsulation negotiation - Dan open Telnet connection
- A
15Refer to the exhibit. A frame is traveling between PC-A and PC-B through the switch. Which statement is true concerning VLAN tagging of the frame?

- A
A VLAN tag is added when the frame is accepted by the switch. - BA VLAN tag is added when the frame is forwarded out the port to PC-B.
- CNo VLAN tag is added to the frame.
- D
A VLAN tag is added when the frame leaves PC-A.
- A
16Port Fa0/11 on a switch is assigned to VLAN 30. If the command no switchport access vlan 30 is entered on the Fa0/11 interface, what will happen?
- APort Fa0/11 will be shutdown.
- BVLAN 30 will be deleted.
- CAn error message would be displayed.
- DPort Fa0/11 will be returned to VLAN 1.
17
Which command displays the encapsulation type, the voice VLAN ID, and the access mode VLAN for the Fa0/1 interface?- A
show mac address-table interface Fa0/1 - Bshow interfaces Fa0/1 switchport
- Cshow vlan brief
- Dshow interfaces trunk
- A
18What happens to a port that is associated with VLAN 10 when the administrator deletes VLAN 10 from the switch?
- AThe port automatically associates itself with the native VLAN.
- BThe port becomes inactive.
- CThe port creates the VLAN again.
- DThe port goes back to the default VLAN.
19What must the network administrator do to remove Fast Ethernet port fa0/1 from VLAN 2 and assign it to VLAN 3?
- A
Enter the no shutdown in interface configuration mode to return it to the default configuration and then configure the port for VLAN 3. - B
Enter the no vlan 2 and the vlan 3 commands in global configuration mode. - C
Enter the switchport access vlan 3 command in interface configuration mode. - DEnter the switchport trunk native vlan 3 command in interface configuration mode.
- A
20Refer to the exhibit. Interface Fa0/1 is connected to a PC. Fa0/2 is a trunk link to another switch. All other ports are unused. Which security best practice did the administrator forget to configure?

- A
Configure all unused ports to a 'black-hole' VLAN that is not used for anything on the network. - BDisable autonegotiation and set ports to either static access or static trunk.
- CChange the native VLAN to a fixed VLAN that is distinct from all user VLANs and to a VLAN number that is not VLAN 1.
- DAll user ports are associated with VLANs distinct from VLAN 1 and distinct from the 'black-hole' VLAN.
- A
21THE =?= command displays the VLAN assignment for all ports as well as the existing VLANs on the switch.
- Ashow vlan brief
- Bshow vlan
- Cshow IP
22Refer to the exhibit. DLS1 is connected to another switch, DLS2, via a trunk link. A host that is connected to DLS1 is not able to communicate to a host that is connected to DLS2, even though they are both in VLAN 99. Which command should be added to Fa0/1 on DLS1 to correct the problem?

- Aswitchport nonegotiate
- Bswitchport trunk native vlan 66
- Cswitchport mode dynamic auto
- Dswitchport trunk allowed vlan add 99
Información
- Descripción
- Test sobre Sin título, creado por JJ CD el 15/04/2015.
- Autor
- JJ CD
- Idioma
- Español
- Visitas
- 1
- Valoración
- Aún sin valoraciones Valora este test