Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Test

Pepinillo 2

TER 200 preguntas

Hacer el test

Este test tiene tiempo límite, así que se abre en el reproductor de siempre.

Preguntas del test (200)

  1. 1Refer to the exhibit. Which two commands when used together create port channel 10? (Choose two.)Imagen de la pregunta 1
    1. Aint range g0/0-1 channel-group 10 mode active
    2. Bint range g0/0-1 channel-group 10 mode desirable
    3. Cint range g0/0-1 channel-group 10 mode passive
    4. Dint range g0/0-1 channel-group 10 mode auto
    5. Eint range g0/0-1 channel-group 10 mode on
  2. 2Refer to the exhibit. An administrator is tasked with configuring a voice VLAN. What is the expected outcome when a Cisco phone is connected to the GigabitEthernet 3/1/4 port on a switch?Imagen de la pregunta 2
    1. AThe phone and a workstation that is connected to the phone do not have VLAN connectivity.
    2. BThe phone sends and receives data in VLAN 50, but a workstation connected to the phone sends and receives data in VLAN 1.
    3. CThe phone sends and receives data in VLAN 50, but a workstation connected to the phone has no VLAN connectivity.
    4. DThe phone and a workstation that is connected to the phone send and receive data in VLAN50.
  3. 3Refer to the exhibit. Which action is expected from SW1 when the untagged frame is received on theGigabitEthernet0/1 interface?
    Imagen de la pregunta 3
    1. AThe frame is processed in VLAN 1
    2. BThe frame is processed in VLAN 11
    3. CThe frame is processed in VLAN 5
    4. DThe frame is dropped
  4. 4Which command is used to enable LLDP globally on a Cisco IOS ISR?
    1. Alldp run
    2. Blldp enable
    3. Clldp transmit
    4. Dcdp run
    5. Ecdp enable
  5. 5Which command should you enter to configure an LLDP delay time of 5 seconds?
    1. Alldp timer 5000
    2. Blldp holdtime 5
    3. Clldp reinit 5000
    4. Dlldp reinit 5
  6. 6In a CDP environment, what happens when the CDP interface on an adjacent device is configured without an IP address?
    1. ACDP becomes inoperable on that neighbor
    2. BCDP uses the IP address of another interface for that neighbor
    3. CCDP operates normally, but it cannot provide IP address information for that neighbor
    4. DCDP operates normally, but it cannot provide any information for that neighbor
  7. 7DRAG DROP -
    Drag and drop the benefits of a Cisco Wireless Lan Controller from the left onto the correct examples on the right. Select and Place:
    Imagen de la pregunta 7
    1. AEasy Deployment Process
      Dynamic RF Feature
      Easy upgrade process
      Optimized user performance
    2. BDynamic RF Feature
      Optimized user performance
      Easy Deployment Process
      Easy upgrade process
    3. CEasy upgrade process
      Optimized user performance
      Easy Deployment Process
      Dynamic RF Feature
  8. 8When configuring an EtherChannel bundle, which mode enables LACP only if a LACP device is detected?
    1. APassive
    2. BDesirable
    3. COn
    4. DAuto
    5. EActive
  9. 9Refer to the exhibit. Which VLAN ID is associated with the default VLAN in the given environment?Imagen de la pregunta 9
    1. AVLAN 1
    2. BVLAN 5
    3. CVLAN 10
    4. DVLAN 20
  10. 10Which two VLAN IDs indicate a default VLAN? (Choose two.)
    1. A0
    2. B1
    3. C1005
    4. D1006
    5. E4096

Información

Descripción
Test sobre Pepinillo 2, creado por TER TER el 22/08/2026.
Autor
TER TER
Idioma
Español
Visitas
0
Valoración
Aún sin valoraciones
Valora este test
Valora este test

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?