Test
Microsoft Exam 70-410: - Volume 2 - Test 1
Crea una cuenta gratis para terminar este test
Guarda tu progreso y consulta tu resultado final.
¿Ya tienes cuenta? Inicia sesión
Preguntas del test (47)
1Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)- AOn each virtual machine, modify the Advanced Features settings of the network adapter.
- BModify the settings of the RDS Virtual virtual switch.
- COn each virtual machine, modify the BIOS settings.
- DDelete, and then recreate the RDS Virtual virtual switch.
- EOn each virtual machine, modify the Hardware Acceleration settings of the network adapter.
2Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the picture.
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
- ANUMA topology
- BResource control
- CResource metering
- DVirtual Machine Chimney
- EThe VLAN ID
- FProcessor Compatibility
- GThe startup order
- HAutomatic Start Action
- IIntegration Services
- JPort mirroring
3You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.
You need to ensure that the feature can be installed on Server1.
What should you do?- AInstall Windows Identity Foundation (WIF) 3.5.
- BInstall the Web Server (IIS) server role.
- CConnect Server1 to the Internet.
- DRun the Add-AppxProvisionedPackage cmdlet.
4You have a server named Server1 that runs Windows Server 2012 R2.
You need to enable access-based enumeration for a file share on Server1.
Which tool should you use?- AFile Server Resource Manager (FSRM)
- BShare and Storage Management
- CServer Manager
- DFile Explorer
5You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.
You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Picture 1.)
You review the installed features on Server1 as shown in the Features exhibit. (Picture 2.)
You need to install the Server Graphical Shell feature on Server1.
Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)- AIndex 1
- BIndex 2
- CIndex 3
- DIndex 4
6Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec connection.
What should you do?- AFrom Windows Firewall with Advanced Security, view the quick mode security association.
- BFrom Event Viewer, search the Application Log for events that have an ID of 1704.
- CFrom Event Viewer, search the Security Log for events that have an ID of 4672.
- DFrom Windows Firewall with Advanced Security, view the main mode security association.
7Your network contains an Active Directory domain named contoso.com. The domain
contains a member server named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a virtual machine on Hyperv1.
Users report that the time on their client computer is incorrect.
You log on to DC1 and verify that the time services are configured correctly.
You need to prevent time conflicts between the time provided by DC1 and other potential time sources.
What should you configure?
To answer, select the appropriate object in the answer area.
- ANetwork Adapter
- BBIOS
- CProcessor
- DIntegration Services
- EAutomatic Start Action
- FSmart Paging File Location
- GSnapshot File Location
8You have a server named DHCP1 that runs Windows Server 2012 R2. DHCP1 does not have access to the Internet.
All roles are removed completely from DHCP1.
You mount a Windows Server 2012 R2 installation image to the C:\Mount folder.
You need to install the DHCP Server server role on DHCP1 by using Server Manager.
Which folder should you specify as the alternate path for the source files?
To answer, select the appropriate folder in the answer area.
- AWinSxS
- BWeb
- CSystem
- DSetup
- ESystem32
- Fschema
- GResources
- Hservicing
- ITAPI
- JSysWOW64
9You have a Hyper-V host named Server1 that runs Windows Server 2012 R2 Datacenter.Server1 is located in an isolated network that cannot access the Internet.
On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012 R2 Essentials and connects to a private virtual network.
After 30 days, you discover that VM1 shuts down every 60 minutes.
You need to resolve the issue that causes VM1 to shut down every 60 minutes.
What should you do?- AOnVM1, run slmgr.exe and specify the /ipk parameter.
- BOnServer1, run slmgr.exe and specify the /rearm-sku parameter.
- CCreate a new internal virtual network and attach VM1 to the new virtual network.
- DOn Server1, run Add-WindowsFeatureVolumeActivation.
10You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has following storage spaces:
1) Data
2) Users
3) Backups
4) Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?- AData
- BBackups
- CUsers
- DPrimordial
11Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non- administrators.
Which tool should you use?- AGroup Policy Object Editor
- BGroup Policy Management
- CGroup Policy Management Editor
- DServer Manager
12Your network contains an Active Directory domain named contoso.com.
An administrator provides you with a file that contains the information to create user accounts for 200 temporary employees. The file is shown in the exhibit. (Picture.)
You need to automate the creation of the user accounts. You must achieve this goal by using the minimum amount of administrative effort.
Which tool should you use?
- ALdifde
- Bcsvde
- CDsadd
- DNet user
13Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image.
You want to achieve this goal by using the minimum amount of administrative effort.
Which command should you run first?
- Adism.exe /image:c:\Server12.wim /enable-feature /featurename:servermigration
- Bdism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
- Cimagex.exe /capture c: c:\Server12.wim "windows server 2012 r2 datacenter"
- Dimagex.exe /apply c:\Server12.wim 4 c:\
14You have a new server named Server1 that runs Windows Server 2012 R2.
Server1 has two dual-core processors and 32 GB of RAM.
You install the Hyper-V server role on Server1.
You create two virtual machines on Server1 that each have 8 GB of memory.
You need to minimize the amount of time it takes for both virtual machines to access memory.
What should you configure on each virtual machine?- AResource control
- BMemory weight
- CDynamic Memory
- DNUMA topology
15Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1.
When you run ping dc1.corp.contoso.com, you receive the result as shown in the exhibit. (Picture1)
You need to ensure that DC1 can respond to the Ping command.
Which rule should you modify? (picture2)
To answer, select the appropriate rule in the answer area.
- A
- B
- C
- D
- E
- F
- G
- H
- A
16You have a server named Server1 that runs Windows Server 2012 R2.
You add an additional disk to Server1 as shown in the exhibit. (Picture)
You need to ensure that users can access the additional disk from drive C.
What should you do?- AConvert Disk 0 to a dynamic disk and add a mirror.
- BCreate a simple volume on Disk 1 and mount the volume to a folder.
- CConvert Disk 0 and Disk 1 to dynamic disks and extend a volume.
- DConvert Disk 1 to a dynamic disk and create a spanned volume.
17You have a server that runs a Server Core installation of Windows Server 2012 R2.
You need to change the DNS server used by IPv6.
What should you do?- AFrom Sconfig, configure the Network Settings.
- BRun the sc.exe command and specify the config parameter.
- CFrom Windows PowerShell, run the Set-NetIpv6Protocol cmdlet.
- DFrom Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.
18You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?- AThe setup.exe command
- BThe dism.exe command
- CThe imagex.exe command
- DThe Add-WindowsPackage cmdlet
19You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed.
You open DNS Manager as shown in the exhibit. (Picture)
You need to view the DNS server cache from DNS Manager.
What should you do first?- AFrom the View menu, click Filter...
- BFrom the Action menu, click Configure a DNS Server...
- CFrom the Action menu, click Properties.
- DFrom the View menu, click Advanced.
20Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server that runs Windows Server 2012 R2.
You perform a Server Core Installation of Windows Server 2012 R2 on a new server.
You need to ensure that you can add the new server to Server Manager on Server1.
What should you configure on the new server? To answer, select the appropriate setting in the answer area.
- A1
- B2
- C3
- D9
- E5
- F8
- G12
- H16
- I15
- J6
21Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that runs Windows Server 2012 R2.
On Server1, you create a work folder named Work1.
A user named User1 connects to Work1 from a computer named Computer1.
You need to identify the last time the documents in Work1 were synchronized successfully from Computer1.
What should you do?- AFrom Server Manager, review the properties of Computer1.
- BFrom Windows PowerShell, run the Get-SyncUserSettingscmdlet.
- CFrom Windows PowerShell, run the Get-SyncSharecmdlet.
- DFrom Server Manager, review the properties of User1.
22You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter.
From Windows PowerShell, you run the following command:
Remove-WindowsFeature ServerGui-Shell.
In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1.
Make only one selection in each row. Each correct selection is worth one point.
- AAvailable: File Explorer
- BAvailable: Internet Explorer 10
- CAvailable: Microsoft Management Console (MMC)
- DAvailable: Server Manager
- EUnavailable: File Explorer
- FUnavailable: Internet Explorer 10
- GUnavailable: Microsoft Management Console (MMC)
- HUnavailable: Server Manager
23Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Print1 that runs Windows Server 2012 R2.
Print1 has 50 shared printers. Each printer is listed in Active Directory.
From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not visible.
You need to ensure that you can view the printer objects in Active Directory Users and Computers.
Which option should you select?
- ALarge Icons
- BSmall Icons
- CList
- DDetail
- EUser, Contacts, Groups, and Computers as containers
- FAdvances Features
- GFilter Options...
- HCustomize...
24You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit. (Picture)
You need to create a storage pool that contains Disk 1 and Disk 2.
What should you do first?
- ADelete volume E
- BConvert Disk 1 and Disk 2 to dynamic disks
- CConvert Disk 1 and Disk 2 to GPT disks
- DCreate a volume on Disk 2
25You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
You need to implement NIC teaming on Server1.
Which two network connections should you include on the NIC team? (To answer, select the two appropriate network connections in the answer area.)
- ANIC1
- BNIC2
- CNIC3
- DvEthernet(Broadcom NetXtreme Gigabit Ethernet - Virtual Switch)
26You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
VM1 has several snapshots.
You need to modify the snapshot file location of VM1.
What should you do?- ADelete the existing snapshots, and then modify the settings of VM1.
- BRight-click VM1, and then click Move. ..
- CRight-click VM1, and then click Export...
- DPauseVM1, and then modify the settings of VM1.
27You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCP Server server role installed.
You need to create an IPv6 reservation for Server2.
Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)- Athe hardware ID
- Bthe DHCPv6 unique identifier
- Cthe DHCPv6 identity association ID
- Dthe SMSBIOS GUID
- Ethe MAC address
28Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.
You need to ensure that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2?- AInstall Windows Management Framework.
- BRun sconfig.exe and configure Remote Server Administration Tools (RSAT).
- CInstall Remote Server Administration Tools (RSAT).
- DRun sconfig.exe and configure remote management.
29Your network contains two Active Directory forests named contoso.com and adatum.com. Each forest contains one domain. A two-way forest trust exists between the forests.
The forests use the address spaces shown in the following table. (Picture)
From a computer in the contoso.com domain, you can perform reverse lookups for the servers in the contoso.com domain, but you cannot perform reverse lookups for the servers in the adatum.com domain.
From a computer in the adatum.com domain, you can perform reverse lookups for the servers in both domains.
You need to ensure that you can perform reverse lookups for the servers in the adatum.com domain from the computers in the contoso.com domain.
What should you create?
- AA trust point
- BA GlobalNames zone
- CA delegation
- DA conditional forwarder
30Your network contains an Active Directory domain named contoso.com.
Your company hires 500 temporary employees for the summer.
The human resources department gives you a Microsoft Excel document that contains a list of the temporary employees.
You need to automate the creation of user accounts for the 500 temporary employees.
Which tool should you use?- AADSI Edit
- BThe csvde.exe command
- CActive Directory Users and Computers
- DThe Add-Member cmdlet
31Your network contains an Active Directory domain named contoso.com. The domain contains hundreds of groups, many of which are nested in other groups.
The domain contains a user account named user1.User1 is a direct member of 15 groups.
You need to identify of which Active Directory groups User1 is a member, including the nested groups. The solution must minimize administrative effort.
Which tool should you use?- AActive Directory Users and Computers
- BADSI Edit
- CGet-ADUser
- DDsget
32Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1 in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?- AFrom Print Management, configure the Sharing settings of Printer1.
- BFrom Active Directory Users and Computers, configure the Security settings of Server1- Printer1.
- CFrom Print Management, configure the Security settings of Printer1.
- DFrom Print Management, configure the Advanced settings of Printer1.
33Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server named DHCP1.
You add a new network segment to the network.
On the new network segment, you deploy a new server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 as a DHCP Relay Agent.
Which server role should you install on Server1? (see picture)
To answer, select the appropriate role in the answer area.
- AActive Directory Federation Services
- BActive Directory Lightweight Directory Services
- CApplication Server
- DDHCP Server
- EDNS Server
- FFile and Storage Services
- GHyper-V
- HNetwork Policy and Access Services
- IRemote Access
- JRemote Desktop Services
34Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?- AFrom the Services console, configure the General settings.
- BFrom Windows PowerShell, run Set-Service and specify the -StartupType parameter.
- CFrom a command prompt, run sc.exe and specify the config parameter.
- DFrom a command prompt, run sc.exe and specify the privs parameter.
35Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?- AComputer Management
- BServer Manager
- CShare and Storage Management
- DNew-VirtualDisk
36Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager.
What should you do?- AFrom Server Manager, click Configure Performance Alerts.
- BFrom Performance Monitor, create a Data Collector Set (DCS).
- CFrom Performance Monitor, start the System Performance Data Collector Set (DCS).
- DFrom Server Manager, click Start Performance Counters.
37Your network contains an Active Directory domain named contoso.com.
The password policy for the domain is set to require a minimum password length of 10 characters.
A user named User1 and a user named User2 work for the sales department.
User1 is forced to create a domain password that has a minimum of 12 characters. User2 is forced to create a domain password that has a minimum of eight characters.
You need to identify what forces the two users to have different password lengths.
Which tool should you use?- ACredential Manager
- BSecurity Configuration Wizard (SCW)
- CGroup Policy Management
- DActive Directory Administrative Center
38You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table. (see picture)
You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.
- AServer1: Modify the TrustedHost list.
- BServer1: Set the network profile to Private
- CServer2: Modify the TrustedHost list.
- DServer2: Set the network profile to Private
- EServer1: Override the User Account Control (UAC) restrictions by using the LocalAccountTokenFilterPolicy registry entry
- FServer2: Override the User Account Control (UAC) restrictions by using the LocalAccountTokenFilterPolicy registry entry
39Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.Client computers run either Windows 7 or Windows 8.
All of the computer accounts of the client computers reside in an organizational unit (OU) named Clients. A Group Policy object (GPO) named GPO1 is linked to the Clients OU. All of the client computers use a DNS server named Server1.
You configure a server named Server2 as an ISATAP router. You add a host (A) record for ISATAP to the contoso.com DNS zone.
You need to ensure that the client computers locate the ISATAP router.
What should you do?- ARun the Set-DnsServerGlobalQueryBlockList cmdlet on Server1.
- BConfigure the Network Options Group Policy preference of GPO1.
- CRun the Add-DnsServerResourceRecord cmdlet on Server1.
- DConfigure the DNS Client Group Policy setting of GPO1.
40Your network contains a production Active Directory forest named contoso.com and a test Active Directory forest named contoso.test. A trust relationship does not exist between the forests.
In the contoso.test domain, you create a backup of a Group Policy object (GPO) named GPO1.
You transfer the backup of GPO1 to a domain controller in the contoso.com domain.
You need to create a GPO in contoso.com based on the settings of GPO1.You must achieve this goal by using the minimum amount of Administrative effort.
What should you do?- AFrom Windows PowerShell, run the Get- GPO cmdlet and the Copy- GPO cmdlet.
- BFrom Windows PowerShell, run the New- GPO cmdlet and the Import- GPO cmdlet.
- CFrom Group Policy Management, create a new starter GPO. Right-click the new starter GPO, and then click Restore from Backup.
- DFrom Group Policy Management, right-click the Croup Policy Objects container, and then click Manage Backups.
41Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?- AHyper-V Administrators on Server1
- BAdministrators on VM1
- CServer Operators on Server1
- DPower Users on VM1
42You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Enterprise. You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?- Aa clean installation of Windows Server 2012
- Ban offline servicing by using Dism
- Can online servicing by using Dism
- Dan upgrade installation of Windows Server 2012
43Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a FQDN.
You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?
- AThe 015 DNS Domain Name option to Subnet1
- BThe 015 DNS Domain Name option to Subnet2
- CThe 006 DNS Servers option to Subnet2
- DThe 006 DNS Servers option to Subnet1
44You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures.
The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs.
Which file system should you use?- ANFS
- BFAT32
- CReFS
- DNTFS
45Your network contains an Active Directory domain named contoso.com.
You log on to a domain controller by using an account named Admin1. Admin1 is a member of the Domain Admins group.
You view the properties of a group named Group1 as shown in the exhibit. (see picture)
Group1 is located in an organizational unit (OU) named OU1.
You need to ensure that you can modify the Security settings of Group1 by using Active Directory Users and Computers.
What should you do from Active Directory Users and Computers?
- AFrom the View menu, select Users, Contacts, Groups, and Computers as containers.
- BRight-click OU1 and select Delegate Control
- CFrom the View menu, select Advanced Features
- DRight-click contoso.com and select Delegate Control.
46Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.All client computers run Windows 8.
The domain contains a security group named Group1.
You have a Group Policy object (GPO) named GPO1.GPO1 is linked to the domain.
You need to ensure that only the members of Group1 can run the applications shown in the following table. (see picture1)
Which type of application control policy should you implement for each application?
To answer, select the appropriate rule types to the correct applications. Each rule type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
- AApp1: Executable Rule
- BApp1: Windows Install Rule
- CApp1: Scrip Rule
- DApp2: Packaged app Rule
- EApp2: Windows Install Rule
- FApp2: Scrip Rule
- GApp3: Packaged app Rule
- HApp3: Executable Rule
- IApp3: Windows Install Rule
47You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 hosts 50 virtual machines.
You need to create a script to list all of the virtual machines that have checkpoints and support Secure Boot.
What should you do? To answer, select the appropriate options in the answer area.
- ABox1: CheckPoint-Vm
- BBox1: Get-Vm
- CBox1: Get-VmSnapshot
- DBox2: CheckPoint-Vm
- EBox2: Get-Vm
- FBox2: Get-VmSnapshots
- GBox3: {$_.generation-eq 2}
- HBox3: {$_.NetworkAdapters-contains "secure
- IBox3: {$_.version-eq 3}
Información
- Descripción
- Microsoft Exam 70-410: Installing and Configuring Windows Server 2012.
- Autor
- Alex Quito
- Idioma
- English
- Visitas
- 488
- Etiquetas
- Valoración
- 5,0 de 5 · 1 valoración Valora este test