Microsoft Exam 70-410: Volume1- Test 1

Alex Quito
Quiz by Alex Quito, updated more than 1 year ago
Alex Quito
Created by Alex Quito about 6 years ago
908
9

Description

Microsoft Exam 70-410: Installing and Configuring Windows Server 2012.

Resource summary

Question 1

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a single location named Site1. The domain contains a server named Server1 that has the DHCP Server server role installed. All client computers receive their IPv4 configurations dynamically. The domain will expand to include a second location named Site2. A server named Server2 will be deployed to Site2. Site1 and Site2 will connect to each other by using a WAN link. You need to ensure that the clients in both sites receive their IPv4 configurations from Server1. In the table above, identify which actions must be performed on each server. Make only one selection in each row. Each correct selection is worth one point.
Answer
  • Create a new scope on both servers and add a routing protocol on server2
  • create a new scope on server1, add a routing protocol and istall the Remote Access server role on server2

Question 2

Question
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 has the virtual switches listed in the following table. You create a virtual machine named VM1.VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1. You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network. What should you do on Server1?
Answer
  • Modify the properties of vSwitch1 and vSwitch2.
  • Add a new network adapter to VM1.
  • Create a new virtual switch on Server 1.
  • Run the Set-VmNetworkAdaptercmdlet.

Question 3

Question
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS). You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE. Which virtual machine setting should you configure for VM2?
Answer
  • NUMA topology
  • Resource control
  • Resource metering
  • Virtual Machine Chimney
  • The VLAN ID
  • Processor Compatibility
  • The startup order
  • Automatic Start Action
  • Integration Services
  • Single-root I/O virtualization

Question 4

Question
Your network contains an Active Directory domain named adatum.com. You discover that when users join computers to the domain, the computer accounts are created in the Computers container. You need to ensure that when users join computers to the domain, the computer accounts are automatically created in an organizational unit (OU) named All_Computers. What should you do?
Answer
  • From a command prompt, run the redircmp.exe command.
  • From ADSI Edit, configure the properties of the OU1 object.
  • From Ldp, configure the properties of the Computers container.
  • From Windows PowerShell, run the Move-ADObject cmdlet.

Question 5

Question
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to modify the SAM account name of Group1. Which cmdlet should you run?
Answer
  • Add-AdPrincipalGroupMembership
  • Install-AddsDomainController
  • Install-WindowsFeature
  • Install-AddsDomain
  • Rename-AdObject
  • Set AdAccountControl
  • Set-AdGroup
  • Set-User

Question 6

Question
Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1. You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1. You join Computer1 to the domain. You need to prevent App1 from running on Computer1. What should you do?
Answer
  • From Computer1, run gpupdate/force.
  • From Group Policy Management, add an application control policy to GP1.
  • From Group Policy Management, enable the Enforced option on GP1.
  • In the local Group Policy of Computer1, configure a software restriction policy.

Question 7

Question
You have a server named Server1 that runs Windows Server 2012 R2. You plan to create a storage pool that will contain a new volume. You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout. What is the minimum number of 256-GB disks required for the storage pool?
Answer
  • 2
  • 3
  • 4
  • 5

Question 8

Question
You have a print server named Server1 that runs Windows Server 2012 R2. You discover that when there are many pending print jobs, the system drive occasionally runs out of free space. You add a new hard disk to Server1.You create a new NTFS volume. You need to prevent the print jobs from consuming disk space on the system volume. What should you modify?
Answer
  • The properties on the new volume
  • The properties of the Print Spooler service
  • The Print Server Properties
  • The properties of each shared printer

Question 9

Question
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8. You deploy a server named Server1 that runs Windows Server 2012 R2. You install a new client-server application named App1 on Server1 and on the client computers. The client computers must use TCP port 6444 to connect to App1 on Server1.Server1 publishes the information of App1 to an intranet server named Server2 by using TCP port 3080. You need to ensure that all of the client computers can connect to App1. The solution must ensure that the application can connect to Server2. Which Windows Firewall rule should you create on Server1?
Answer
  • an inbound rule to allow a connection to TCP port 3080
  • an outbound rule to allow a connection to TCP port 3080
  • an outbound rule to allow a connection to TCP port 6444
  • an inbound rule to allow a connection to TCP port 6444

Question 10

Question
Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2. You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2. The new domain controller will have the following configurations: Schema master Global catalog server Active Directory Federation Services server role Active Directory Certificate Services server role You need to identify which configuration can be fulfilled by using the Active Directory Domain Services Configuration Wizard. Which configuration should you identify?
Answer
  • Enable the global catalog server.
  • Install the DNS Server role.
  • Install the Active Directory Certificate Services role.
  • Transfer the schema master.

Question 11

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com. All client computers are configured to use DC1 as the primary DNS server. You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the DNS server of your Internet Service Provider (ISP). What should you configure?
Answer
  • Naming Authority Pointer (NAPTR) DNS resource records (RR)
  • Name server (NS) records
  • A Forwarders
  • Conditional forwarders

Question 12

Question
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contain several virtual machines that run Windows Server 2012 R2. You install the Network Load Balancing feature on the virtual machines. You need to configure the virtual machines to support Network Load Balancing (NLB). Which virtual machine settings should you configure?
Answer
  • DHCP guard
  • Port mirroring
  • Router guard
  • MAC address

Question 13

Question
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed. You connect a new print device to the network. The marketing department and the sales department will use the print device. You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users. What should you do on Server1?
Answer
  • Add two printers. Modify the priorities of each printer and the security settings of each printer
  • Add two printers and configure printer pooling
  • Add one printer and configure printer pooling.
  • Add one printer. Modify the printer priority and the security settings

Question 14

Question
Your network contains an Active Directory forest. The forest functional level is Windows Server 2012 R2. The forest contains a single domain. The domain contains a member server named Server1. Server1 runs windows Server 2012 R2. You purchase a network scanner named Scanner1 that supports Web Services on Devices (WSD). You need to share the network scanner on Server1. Which server role should you install on Server1?
Answer
  • Web Server (IIS)
  • Fax Server
  • Print and Document Services
  • File and Storage Services

Question 15

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2. You create a group Managed Service Account named gservice1. You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1?
Answer
  • From Services Console configure the recovery settings
  • From a command prompt, run sc.exe and specify the config parameter
  • From Windows PowerShell, run Set-Service and specify the -PassThrough parameter
  • From a command prompt, run sc.exe and specify the sdset parameter

Question 16

Question
Your network contains multiple subnets. On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2. You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com. You need to ensure that client computers can resolve single-label names to IP addresses. What should you do first?
Answer
  • Create a reverse lookup zone.
  • Convert the contoso.com zone to an Active Directory-integrated zone.
  • Configure dynamic updates for contoso.com.
  • Create a GlobalNames zone.

Question 17

Question
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3. On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10. You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails. What should you do?
Answer
  • From Server Manager, change the load balancing mode of Team1.
  • Run the New-NetLbfoTeam cmdlet.
  • From Server Manager, add an interface to Team1.
  • Run the Add-NetLbfoTeamMember cmdlet.

Question 18

Question
Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. On a server named Core1, you perform a Server Core Installation of Windows Server 2012 R2. You join Core1 to the adatum.com domain. You need to ensure that you can use Event Viewer on Server1 to view the event logs on Core1. What should you do on Core1?
Answer
  • Run the Disable NetFirewallRule cmdlet.
  • Install Remote Server Administration Tools (RSAT).
  • Install Windows Management Framework.
  • Run the Enable-Com + Network Access Firewall Rule.

Question 19

Question
Your network contains an Active Directory domain named adatum.com. You create an account for a temporary employee named User1. You need to ensure that User1 can log on to the domain only between 08:00 and 18:00 from a client computer named Computer1. From which tab should you perform the configuration? To answer, select the appropriate tab in the answer area.
Answer
  • Profile
  • Member Of
  • General
  • Organization
  • Account

Question 20

Question
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the table. You install a network monitoring application on VM2. You need to ensure that all of the traffic sent to VM3 can be captured on VM2. What should you configure?
Answer
  • NUMA topology
  • Resource control
  • Resource metering
  • Virtual Machine Chimney
  • The VLAN ID
  • Processor Compatibility
  • The startup order
  • Automatic Start Action
  • Integration Services
  • Port mirroring

Question 21

Question
Your network contains an Active Directory domain named contoso.com. You log on to a domain controller by using an account named Admin1.Admin1 is a member of the Domain Admins group. You view the properties of a group named Group1 as shown in the exhibit. (Click the Exhibit button.) Group1 is located in an organizational unit (OU) named OU1. You need to ensure that users from Group1 can modify the Security settings of OU1 only. What should you do from Active Directory Users and Computers?
Answer
  • Modify the Managed By settings on OU1.
  • Right-click contoso.com and select Delegate Control.
  • Right-click OU1 and select Delegate Control.
  • Modify the Security settings of Group1.

Question 22

Question
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter. Host1 contains two virtual machines named VM1 and VM2. You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN. Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)
Answer
  • On VM1, configure a Fibre Channel adapter.
  • On Host1, configure a new virtual switch.
  • On VM1, add a network adapter.
  • On Host1, configure a new Virtual Fibre Channel SAN.
  • On Host1, modify the Hyper-V settings.

Question 23

Question
Your network contains an Active Directory domain named contoso.com. The DNS zone for contoso.com is Active-Directory integrated. The domain contains 500 client computers. There are an additional 20 computers in a workgroup. You discover that every client computer on the network can add its record to the contoso.com zone. You need to ensure that only the client computers in the Active Directory domain can register records in the contoso.com zone. What should you do?
Answer
  • Sign the contoso.com zone by using DNSSEC.
  • Configure the Dynamic updates settings of the contoso.com zone.
  • Configure the Security settings of the contoso.com zone.
  • Move the contoso.com zone to a domain controller that is configured as a DNS server.

Question 24

Question
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. User1 logs on to a client computer named Computer1. You need to disable the computer account of Computer1. Which cmdlet should you run?
Answer
  • Set-User
  • Set-AdGroup
  • Set-AdAccountControl
  • Roname-AdObject
  • Install AddsDomain
  • Install WindowsFeature
  • Install-AddsDomainController
  • Add-AdPrincipalGroupMember.hip

Question 25

Question
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.VM1 has a legacy network adapter. You need to assign a specific amount of available network bandwidth to VM1. What should you do first?
Answer
  • Remove the legacy network adapter, and then run the Set-VMNetworkAdapter cmdlet.
  • Add a second legacy network adapter, and then run the Set-VMNetworkAdopter cmdlet
  • Add a second legacy network adapter, and then configure network adapter teaming.
  • Remove the legacy network adapter, and then add a network adapter

Question 26

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs windows 8. DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.) Computer1 is configured to obtain an IP address automatically. You notice that Computer1 is unable to obtain an IP address from DC1. You need to ensure that Computer1 can receive an IP address from DC1. What should you do?
Answer
  • Disable the Allow filters.
  • Disable the Deny filters.
  • Authorize DC1.contoso.com.
  • Activate Scope [10.1.1.0] Contoso.com.

Question 27

Question
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2. Server1 is configured to obtain an IPv4 address by using DHCP. You need to configure the IPv4 settings of the network connection on Server1 as - follows: IP address: 10.1.1.1 - Subnet mask: 255.255.240.0 - Default gateway: 10.1.1.254 What should you run?
Answer
  • netsh.exe
  • netcfg.exe
  • msconfig.exe
  • ipconfig.exe

Question 28

Question
Your network contains an Active Directory domain named contoso.com. You have a DHCP server named Server1 that runs Windows Server 2008. You install Windows Server 2012 R2 on a server named Server2. You install the DHCP Server server role on Server2. You need to migrate the DHCP services from Server1 to Server2. The solution must meet the following requirements: - Ensure that existing leases are migrated. - Prevent lease conflicts. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
Answer
  • On Server1, run the Export-DhcpServer cmdlet.
  • On Server1, run the Stop-Service cmdlet.
  • On Server2, run the Receive-SmigServerData cmdlet.
  • On Server2, run the Stop-Service cmdlet.
  • On Server2, run the Import-DhcpServer cmdlet.
  • On Server1, run the Send-SmigServerData cmdlet.

Question 29

Question
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. An iSCSI SAN is available on the network. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. You create a LUN on the SAN to host the virtual hard drive files for the virtual machines. You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being paused if the LUN runs out of disk space. Which type of virtual hard disk should you create on the LUN?
Answer
  • Dynamically expanding VHDX
  • Fixed-size VHDX
  • Fixed-size VHD
  • Dynamically expanding VHD

Question 30

Question
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 You log on to Server1. You need to retrieve a list of the active TCP connections on Server2. Which command should you run from Server1?
Answer
  • winrm get server2
  • netstat> server2
  • dsquery * -scope base -attrip, server2
  • winrs -r:server2 netstat

Question 31

Question
You have a server named Server1 that runs Windows Server 2012 R2. You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers. You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE): Configuration Configuration1 { Service Service1 { Name = "AppIDSvc" StartupType = "Automatic" } } You need to use DSC to configure Server1 as defined in the configuration. What should you run first?
Answer
  • Service1
  • Configuration1
  • Start DscConfiguration
  • Test-DscConfigu ration

Question 32

Question
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk. Which tool should you use?
Answer
  • diskpart.exe
  • vdsldr.exe
  • fsutil.exe
  • vds.exe

Question 33

Question
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots. What should you do?
Answer
  • Right-click VM1, and then click Export.
  • Shut down VM1, and then modify the settings of VM1.
  • Delete the existing snapshots, and then modify the settings of VM1.
  • Pause VM1, and then modify the settings of VM1.

Question 34

Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed. On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear. You need to view the Deployed Printers node in GPO1. What should you do?
Answer
  • On Server1, modify the Group Policy filtering options of GPO1.
  • On a domain controller, create a Group Policy central store.
  • On Server2, install the Group Policy Management feature.
  • On Server1, configure the security filtering of GPO1.

Question 35

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2. You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?
Answer
  • New-StoragePool
  • Diskpart
  • File Server Resource Manager (FSRM)
  • New-StorageSubsytemVirtualDisk

Question 36

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com. The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server. From Server2, you run nslookup.exe as shown in the exhibit. (Click the Exhibit button.) You need to ensure that when you run Nslookup, the correct name of the default server is displayed. What should you do?
Answer
  • On Server1, create a reverse lookup zone.
  • On Server1, modify the Security settings of the contoso.com zone.
  • From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list.
  • From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list.

Question 37

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the table. You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1. What should you do before you create the checkpoint?
Answer
  • Run the Resize-VHD cmdlet.
  • Convert Disk1.vhd to a dynamically expanding disk.
  • Shut down VM1.
  • Run the Convert-VHD cmdlet.

Question 38

Question
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2. You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192. You need to ensure that Scope1 has a subnet mask of 255.255.255.0. What should you do first?
Answer
  • From the DHCP console, reconcile Scope1.
  • From the DHCP console, delete Scope1.
  • From the DHCP console, modify the Scope Options of Scope1.
  • From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.

Question 39

Question
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. A server named Server1 is configured to encrypt all traffic by using IPSec. You need to ensure that Server1 can respond to ping requests from computers that do not support IPSec. What should you do?
Answer
  • From a command prompt, run netsh set global autotuninglevel = highlyrestrictedcongestionprovider=none.
  • From a command prompt, run netsh set global autotuninglevel = restricted congestionprovider = ctcp.
  • From Windows Firewall with Advanced Security, allow unicast responses for the Domain Profile.
  • From Windows Firewall with Advanced Security, exempt ICMP from IPSec.

Question 40

Question
You have a server named Server1 that runs Windows Server 2012 R2. On Server1, you open Computer Management as shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can create a 3-TB volume on Disk 1. What should you do first?
Answer
  • Create a storage pool.
  • Convert the disk to a GPT disk.
  • Create a VHD, and then attach the VHD.
  • Convert the disk to a dynamic disk.

Question 41

Question
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup. On Server1 and Server2, you create a local user account named Admin1.You add the account to the local Administrators group. On both servers, Admin1 has the same password. You log on to Server1 as Admin1. You open Computer Management and you.connect to Server2. When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access Denied messages. You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management. What should you configure on Server2?
Answer
  • From Server Manager, modify the Remote Management setting.
  • From Local Users and Groups, modify the membership of the Remote Management Users group.
  • From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule.
  • From Registry Editor, configure the LocalAccountTokenFilterPolicy registry value.

Question 42

Question
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You reconfigure DC2 as a member server in the domain. You need to add DC2 as the first domain controller in a new domain in the forest.
Answer
  • Add-AdPrincipalGroupMembership
  • Install-AddsDomainController
  • Install WindowsFeature
  • Install AddsDomain
  • Rename-AdObject
  • Set AdAccountControl
  • Set-AdGroup
  • Set-User

Question 43

Question
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2. The domain contains a user named User1 and a global security group named Group1. You need to prevent User1 from changing his password. The solution must minimize administrative effort. Which cmdlet should you run?
Answer
  • Add-AdPrincipalGroupMembership
  • Install-AddsDomainController
  • Install-WindowsFeature
  • Install-AddsDomain
  • Rename-AdObject
  • Set-AdAccountControl
  • Set-AdGroup
  • Set-User

Question 44

Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 run a Server with a GUI installation of Windows Server 2012 R2. You remove the Graphical Management Tools and Infrastructure feature on Server2. You need to restart Server2. What should you do? (To answer, drag the appropriate tools to the correct statements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer
  • Sconfig
  • Netsh
  • Server Config
  • Power Options
  • rest-computer
  • Control Panel
  • Regedit
  • Server Manager

Question 45

Question
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1. On VM5, you install a network monitoring application named Monitor1. You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1. Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
Answer
  • Get-VM “VM6 | Set-VMNetworkAdapter-IovWeight 1
  • Get-VM “VM5 I Set-VMNetworkAdapter -IovWeight 0
  • Get-VM “VM5 | Set-VMNetworkAdapter -PortMirroring Source
  • Get-VM “VM6 | Set-VMNetworkAdapter -AllowTeaming On
  • Get-VM “VM6 | Set-VMNetworkAdapter -PortMirroring Destination
  • Get-VM “VM5 | Set-VMNetworkAdapter -AllowTeaming On

Question 46

Question
Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as shown in the table. When the link between Site1 and Site2 fails, users fail to log on to Site2. You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain. What should you identify?
Answer
  • The placement of the global catalog server
  • The placement of the infrastructure master
  • The placement of the domain naming master
  • The placement of the PDC emulator

Question 47

Question
Your network contains an Active Directory domain named contoso.com. The domain contains 100 servers. The servers are contained in an organizational unit (OU) named Servers OU. You need to create a group named Group1 on all of the servers in the domain. You must ensure that Group1 is added only to the servers. What should you configure?
Answer
  • a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers OU
  • a Restricted Groups setting in a Group Policy linked to the domain
  • a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
  • a Restricted Groups setting in a Group Policy linked to Servers OU
Show full summary Hide full summary

Similar

Exam 70-410: Installing and Configuring Windows Server 2012 R2
Mike M
Microsoft Exam 70-410: Volume 1- Test 2
Alex Quito
70-410 - MCSA: Windows Server 2012 - Installing and Configuring - Exam 2
Mike M
70-410 - MCSA: Windows Server 2012 - Installing and Configuring - Exam 3
Mike M
70-410 - MCSA: Windows Server 2012 - Installing and Configuring - Exam 1
Mike M
Exam 70-410: Installing and Configuring Windows Server 2012 R2
augusto.ms
Exam 70-410: Installing and Configuring Windows Server 2012 R2
James Coppin
70-410 Microsoft Exam: Test 2 - Volume 1
Alex Quito
Exam 70-410: Installing and Configuring Windows Server 2012 R2
Rodrigo Martins
Exam 70-410: Installing and Configuring Windows Server 2012 R2
Dave S
Microsoft Exam 70-410: - Volume 2 - Test 2
Alex Quito