Test
70 - 410 QUIZ 1 - VOLUME 2
Preguntas del test (47)
1You have a server named Server1 that runs Windows Server 2012 R2.
You connect three new hard disks to Server1.
You need to create a storage space that contains the three disks.
The solution must meet the following requirements:
Provide fault tolerance if a single disk fails.
Maximize the amount of files that can be stored in the storage space.
What should you create?- AA simple space
- BA spanned volume
- CA mirrored space
- DA parity space
2You have a server named Corel that has a Server Core Installation of Windows Server
2012 R2.
Corel has the Hyper-V server role installed. Corel has two network adapters from different
third-party hardware vendors.
You need to configure network traffic failover to prevent connectivity loss if a network
adapter fails.
What should you use?- ANew-NetSwitchTeam
- BInstall-Feature
- CAdd-NetSwitchTeamMember
- DNetsh.exe
3Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines
named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
You need to configure VM4 to track the CPU, memory, and network usage.
What should you configure?
- ANUMA topology
- BResource control
- CResource metering
- DVirtual Machine Chimney
- EThe VLAN ID
- FProcessor Compatibility
- GThe startup order
- HAutomatic Start Action
- IIntegration Services
4You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has
the virtual switches listed in the following table.
You create a virtual machine named VM1. VM1 has two network adapters. One network
adapter connects to vSwitch1. The other network adapter connects to vSwitch2. You
configure NIC teaming on VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the
network.
What should you do on Server1?
- ARun the Set-VmNetworkAdapter cmdlet.
- BCreate a new virtual switch on Server1
- CModify the properties of vSwitch1 and vSwitch2
- DAdd a new network adapter to VM1.
5You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10
shared printers. You need to change the location of the spool folder.
What should you modify?- AThe properties of the Print Spooler service
- BThe Print Server Properties
- CThe user environment variables
- DThe PrintQueue.inf file
6Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012 R2. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard,
and then you click View script.
You need to ensure that you can use the script to promote Server1 to a domain controller.
Which file extension should you use to save the script?- A.bat
- B.cmd
- C.ps1
- D.xml
7The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit.
(Click the Exhibit button.)
The settings for Disk1.vhdx are configured as shown in the Disk1.vhdx exhibit. (Click the
Exhibit button.)
The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the
Exhibit button.)
Select Yes if the statement can be shown to be true based on the available information;
otherwise select No. Each correct selection is worth one point.
- Aa
- Bb
- Csee image for ans for answer
- Aa
8You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB
disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?- ACreate a storage pool.
- BConvert the disk to a dynamic disk
- CCreate a VHD, and then attach the VHD.
- DConvert the disk to a GPT disk.
9Your network contains an Active Directory domain named contoso.com. All domain
controllers run Windows Server 2012 R2.
You create and enforce the default AppLocker executable rules.
Users report that they can no longer execute a legacy application installed in the root of
drive C.
You need to ensure that the users can execute the legacy application.
What should you do?- ACreate a new rule
- BDelete an existing rule.
- CModify the action of the existing rules.
- DAdd an exception to the existing rules
10You have a server named Print1 that runs Windows Server 2012 R2.
On Print1, you share a printer named Printer1.
You need to ensure that only the members of the Server Operators group, the
Administrators group, and the Print Operators group can send print jobs to Printer1.
What should you do?- ARemove the permissions for the Creator Owner group.
- BAssign the Print permission to the Server Operators group.
- CRemove the permissions for the Everyone group.
- DAssign the Print permission to the Administrators group.
11Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3.
You create a server group named ServerGroup1.
You discover the error message shown in the following exhibit. (Click the Exhibit button.)
You need to ensure that Server2 can be managed remotely by using Server Manager.
What should you do?
- AOn DC1, run the Enable-PSSessionConfiguration cmdlet.
- BOn Server2, run the Add-Computer cmdlet.
- COn Server2 modify the membership of the Remote Management Users group
- DFrom Active Directory Users and Computers, add a computer account named Server2,
and then restart Server2.
12Your network contains a server named Server1 and 10 Web servers. All servers run
Windows Server 2012 R2.
You create a Windows PowerShell Desired State Configuration (DSC) to push the settings
from Server1 to all of the Web servers.
On Server1, you modify the file set for the Web servers.
You need to ensure that all of the Web servers have the latest configurations.
Which cmdlet should you run on Server1?- AGet-DcsConfiguration
- BRestore-DcsConfiguration
- CSet-DcsLocalConfigurationManager
- DStart-DcsConfiguration
13You are configuring a test network. The test network contains a subnet named LAN1. LAN1
uses the network ID of 10.10.1.0/27.
You plan to add a new subnet named LAN2 to the test network.
LAN1 and LAN2 will be connected by a router.
You need to identify a valid network ID for LAN2 that meets the following requirements:
Ensures that hosts on LAN2 can communicate with hosts on LAN1.
Supports at least 100 IPv4 hosts.
Uses only private IP addresses.
Which network ID should you use?
To answer, drag the appropriate network ID and subnet mask to the correct location in the
answer area.
- A10.10.1.128
- B255.255.255.128
- C255.255.0.0
- D255.255.255.0
- E255.255.255.192
- F10.10.1.0
- G10.10.1.16
- H10.10.1.192
14Your network contains an Active Directory domain named contoso.com. The network
contains 500 client computers that run Windows 8. All of the client computers connect to
the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the
DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client
computers.
What should you do on Server1?- ACreate a primary zone named “root”.
- BCreate a primary zone named "GlobalNames".
- CCreate a forwarder that points to 169.254.0.1.
- DCreate a primary zone named “.”.
15Your network contains an Active Directory forest named contoso.com. The forest contains
five domains. All domain controllers run Windows Server 2012 R2.
The contoso.com domain contains two user accounts named Admin1 and Admin2.
You need to ensure that Admin1 and Admin2 can configure hardware and services on all of
the member servers in the forest. The solution must minimize the number of privileges
granted to Admin1 and Admin2.
Which built-in groups should you use?- AAdministrators local groups
- BAdministrators domain local groups
- CDomain Admins global groups
- DServer Operators global groups
16You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the
Print and Document Services server role installed.
Server1 is connected to two identical print devices.
The solution must ensure that if one print device fails, the print jobs will print automatically
on the other print device.
What should you do on Server1?- AAdd two printers and configure the priority of each printer.
- BAdd one printer and configure printer pooling.
- CInstall the Network Load Balancing (NLB) feature, and then add one printer
- DInstall the Failover Clustering feature, and then add one printer
17Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1. You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?- ABIOS
- BNetwork Adapter
- CCOM 1
- DProcessor
18You have a server named Server 1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters and is located in a perimeter network. You need to
install a DHCP Relay Agent on Server1.
Which node should you use to add the DHCP Relay Agent? To answer, select the
appropriate node in the answer area.
- AGeneral
- BStatic Routes
- CNAT
19Your network contains an Active Directory domain named contoso.com. The domain
contains 25 servers. All servers run Windows Server 2012 R2.
You need to create a Windows Firewall rule to prevent administrators from using Internet
Explorer to access the Internet while they are logged on interactively to the servers. The
solution must not prevent administrators from accessing websites on the internal network.
How should you configure the rule?
To answer, select the appropriate options in the answer area.
- AInbound
- BOutbound
- CPort
- DProgram
- EDomain
- FPrivate
- GPublic
20Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1. You verify
that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk
file.
The solution must minimize the amount of downtime on VM1.
What should you do?- AFrom a command prompt, run dism.exe and specify the /delete-image parameter.
- BFrom a command prompt, run dism.exe and specify the /commit-image parameter
- CFrom Hyper-V Manager, delete the checkpoint
- DFrom Hyper-V Manager, inspect the virtual hard disk.
21You have a file server named Server1 that runs Windows Server 2012 R2. Server1
contains a folder named Folder1
A user named User1 is a member of Group1 and Group2. A user named User2 is a
member of Group2 and Group3.
You need to identify which actions the users can perform when they access the files in
Share1.
What should you identify?
To answer, select the appropriate actions for each user in the answer area.
- Aanswer above
- Bsee image
22Your network contains a subnet named Subnet1. Subnet1 contains a DHCP server named
Server1.
You deploy a new subnet named Subnet2. On Subnet2, you deploy a new server named
Server2 that runs Windows Server 2012 R2.
You need to configure Server2 to route DHCP broadcast from Subnet2 to Server1.
Which server role should you install on Server2?
To answer, select the appropriate role in the answer area.
- ARemote Desktop Services
- BRemote Access
- CNetwork Policy and Access services
- DWeb Server IIS
23Your company has a main office and four branch offices. The main office contains a server
named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following table.
You need to add a single static route on Server1 to ensure that Server1 can communicate
with the hosts on all of the subnets.
Which command should you run?
- Aroute.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
- Broute.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
- Croute.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
- Droute.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
- Eanswer explained
24You are configuring the IPv6 network infrastructure for a branch office.
The corporate network administrator allocates the 2001:DB8:0:C000::/58 address space for
use in the branch office.
You need to identify the maximum number of IPv6 subnets you can create.
How many IPv6 subnets should you identify?- A32
- B64
- C128
- D1024
25Your network contains several servers that run Windows Server 2012 R2 and client
computers that run Windows 8.1.
You download several signed Windows PowerShell scripts from the Internet.
You need to run the PowerShell scripts on all of the servers and all of the client computers.
What should you modify first?- AThe environment variables on all of the servers
- BThe execution policy on all of the servers
- CThe execution policy on all of the client computers
- DThe environment variables on all client computers
26You have a server named Server1 that runs Windows Server 2012 R2.
A network technician installs a new disk on Server1 and creates a new volume. The
properties of the new volume are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can enable NTFS disk quotas for volume D.
What should you do first?
- AInstall the File Server Resource Manager role service
- BFormat volume D.
- CRun the convert.exe command
- DConvert the disk to a dynamic disk.
27Your network contains an Active Directory domain named adatum.com. The domain
contains a member server named Server1 and a domain controller named DC2.All servers
run Windows Server 2012 R2.
On DC2, you open Server Manager and you add Server1 as another server to manage.
From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when you right-click Server1, you see the option to run the DHCP
console.
What should you do?
- AIn the domain, add DC2 to the DHCP Administrators group
- BOn Server1, install the Feature Administration Tools
- COn DC2 and Server1, run winrmquickconfig.
- DOn DC2, install the Role Administration Tools.
28Your network contains three servers that run Windows Server 2012 R2. The servers are
configured as shown in the following table.
Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?
- AA reservation
- BA filter
- CA scope option
- DAn exclusion
29Your network contains an Active Directory domain named adatum.com. The domain
contains a member server named L0N-DC1. L0N-DC1 runs Windows Server 2012 R2 and
has the DHCP Server server role installed.
The network contains 100 client computers and 50 IP phones. The computers and the
phones are from the same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100
to 172.16.1.200. The solution must minimize administrative effort.
What should you create?- AServer level policies
- BReservations
- CFilters
- DScope level policies
30Your network contains an Active Directory domain named contoso.com.
You need to identify whether the Company attribute replicates to the global catalog.
Which part of the Active Directory partition should you view?
To answer, select the appropriate Active Directory object in the answer area.
- ARootDSE
- BSchema
- CForestDNS Zones
- DDomainDNS Zones
- EConfiguration
- FDefault naming Content
31Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share
– Advanced option.
You need to ensure that you can use SMB Share – Advanced to create the new share.
What should you do on Server1 before you run the New Share Wizard?- AConfigure the Advanced system settings
- BRun the Install-WindowsFeature cmdlet
- CRun the Set-SmbShare cmdlet
- DInstall the Share and Storage Management tool.
32Your network contains an Active Directory domain named contoso.com.
An organizational unit (OU) named OU1 contains user accounts and computer accounts.
A Group Policy object (GPO) named GP1 is linked to the domain.GP1 contains Computer
Configuration settings and User Configuration settings.
You need to prevent the User Configuration settings in GP1 from being applied to users.
The solution must ensure that the Computer Configuration settings in GP1 are applied to all
client computers.
What should you configure?- AThe GPO Status
- BThe Block Inheritance feature
- CThe Group Policy loopback processing mode
- DThe Enforced setting
33Your network contains an Active Directory domain named contoso.com.
All of the AppLocker policy settings for the member servers are configured in a Group
Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer
policy.
You need to merge the local AppLocker policy settings from Server1 into the AppLocker
policy settings of GPO1.
What should you do?- AFrom Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by
using Group Policy Management Editor. - BFrom Server1, run the Set-ApplockerPolicy cmdlet
- CFrom Local Group Policy Editor on Server1, export an .xml file. Import the .xml file by
using Group Policy Management Editor. - DFrom Server1, run the New-ApplockerPolicy cmdlet.
- AFrom Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by
34Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2 and a server named
Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are
member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed
remotely from Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the
solution.Choose two.)- ARun the systempropertiesremote. execommand
- BRun the Fnable-PsRemoting cmdlet.
- CRun the Enable-PsSessionConfigurationcmdlet
- DRun the Confiqure-SMRemoting.ps1script.
- ERun the Set-ExecutionPolicycmdlet.
35You have a server that runs Windows Server 2012 R2.
You need to create a volume that will remain online if two disks in the volume fail.
The solution must minimize the number of disks used to create the volume.
Which three actions should you perform in sequence?- AAdd five physical disks
- BCreate a storage space and set the disk allocation of one of the disks to "Hot Spare"
- CCreate a virtual disk
- DCreate a storage space by using the default disk allocation
- EAdd three physical disks
36Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. The domain contains a standalone server named
Server2 that is located in a perimeter network. Both servers run Windows Server 2012 R2.
You need to manage Server2 remotely from Server1.
What should you do?- AFrom Server1, run the Enable-PsRemotingcmdlet
- BFrom Server2, run the winrm command.
- CFrom Server2/ run the Enable-PsRemotingcmdlet
- DFrom Server1, run the winrm command.
37Your network contains an Active Directory domain named contoso.com. The domain
contains servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a windows PowerShell script named Scriptl.psl that contains the following
configuration:
You need to apply the configuration to Server1. The solution must ensure that the
configuration on Server1 can be updated by modifying a MOF file on Server2.
Which actions should you perform on each server?
To answer, select the appropriate server on which to perform each action in the answer
area.
- Aanswer above
- Ba
38Your network contains an Active Directory domain named contoso.com. The domain
contains 20 computer accounts that reside in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to assign
several user rights to a user named User1.
In the Users container, you create a new user named User2.
You need to ensure that User2 is assigned the same user rights as User1 on all of the
client computers in OU1.
What should you do?- AModify the settings in GPO1.
- BModify the link of GPO1.
- CLink a WMI filter to GPO1
- DMove User2 to OU1.
39Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs a Server Core installation of Windows
Server 2012 R2.
You install the DNS Server server role on Server1.
You need to perform the following configurations on Server1:
Create an Active Directory-integrated zone named adatum.com.
Send unresolved DNS client queries for other domain suffixes to the DNS server of
your company's Internet Service Provider (ISP).
Which Windows PowerShell cmdlets should you use?
To answer, drag the appropriate cmdlet to the correct configuration in the answer area.
Each cmdlet may be used once, more than once, or not at all. You may need to drag the
split bar between panes or scroll to view content.
- AAdd-DNS Server Directory Partition
- BAdd-DNS Server Primary Zone
- CSet - DNS Server
- DSet - DNS Server Forwarder
- ESet - DNS Server DS Setting
- FSet - DNS Server Setting
40You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the
Windows Deployment Services (WDS) server role installed.
You install the DHCP Server server role on Server1.
You need to ensure that Server1 can respond to DHCP clients and WDS clients.
What should you configure for the DHCP service and the WDS service?
To answer, configure the appropriate options in the answer area.
- AEnable Option 60 PXEClient
- BEnable Option 067 Bootfile name
- CEnable Option 082 Relay Agent Information
- DEnable the Do not Listen on DHCP options
- EDisable the Do not Listen on DHCP options
41Your network contains an Active Directory domain named contoso.com. The domain
contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec
connection.
What should you do?- AFrom Windows Firewall with Advanced Security, view the quick mode security
association - BFrom Event Viewer, search the Application Log for events that have an ID of 1704.
- CFrom Event Viewer, search the Security Log for events that have an ID of 4672.
- DFrom Windows Firewall with Advanced Security, view the main mode security
association
- AFrom Windows Firewall with Advanced Security, view the quick mode security
42Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named Server1 that runs Windows Server 2012 R2.
On Server1, you create a work folder named Work1.
A user named User1 connects to Work1 from a computer named Computer1.
You need to identify the last time the documents in Work1 were synchronized successfully
from Computer1.
What should you do?- AFrom Server Manager, review the properties of Computer1.
- BFrom Windows PowerShell, run the Get-SyncUserSettingscmdlet
- CFrom Windows PowerShell, run the Get-SyncSharecmdlet
- DFrom Server Manager, review the properties of User1.
43Your network contains an Active Directory domain named contoso.com. The domain
contains hundreds of groups, many of which are nested in other groups.
The domain contains a user account named user1.User1 is a direct member of 15 groups.
You need to identify of which Active Directory groups User1 is a member, including the
nested groups. The solution must minimize administrative effort.
Which tool should you use?- AActive Directory Users and Computers
- BADSI Edit
- CGet-ADUser
- DDsget
44Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1
in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?- AFrom Print Management, configure the Sharing settings of Printer1.
- BFrom Active Directory Users and Computers, configure the Security settings of Server1-
Printer1. - CFrom Print Management, configure the Security settings of Printer1
- DFrom Print Management, configure the Advanced settings of Printer1.
45Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1
to the domain.
You need to ensure that you can view processor usage and memory usage information in
Server Manager.
What should you do?- AFrom Server Manager, click Configure Performance Alerts.
- BFrom Performance Monitor, create a Data Collector Set (DCS).
- CFrom Performance Monitor, start the System Performance Data Collector Set (DCS).
- DFrom Server Manager, click Start Performance Counters.
46Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a
virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The
solution must minimize the number of permissions assigned to User1.
To which group should you add User1?- AHyper-V Administrators on Server1
- BAdministrators on VM1
- CServer Operators on Server1
- DPower Users on VM1
47You have a server named Data1 that runs a Server Core Installation of Windows Server
2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2
Enterprise. You want to achieve this goal by using the minimum amount of administrative
effort.
What should you perform?- Aa clean installation of Windows Server 2012
- Ban offline servicing by using Dism
- Can online servicing by using Dism
- Dan upgrade installation of Windows Server 2012
Información
- Descripción
- 70-410 70-410 Test sobre 70 - 410 QUIZ 1 - VOLUME 2, creado por saheed Tijani el 27/01/2016.
- Autor
- saheed Tijani
- Idioma
- English
- Visitas
- 215
- Etiquetas
- Valoración
- Aún sin valoraciones Valora este test