¡GoConqr estrena diseño! Cuéntanos qué te parece.

Fichas

CMP

daniel upton Inglés 102 fichas

What is the probabillity function like at 0k and >0k

Fichas del conjunto (102)

  1. 1mean thermal velocity1/2 mv(th)^2 = 3/2 kt
    Where m = mass(kg)
    v(th) = thermal velocity(m/s)
    k = boltzman constant(m^2 kg s^-2 k^-1)
    t= temperature(k)
  2. 2drift velocityV(D) = ατ=eετ/m
    Where V(D) = Drift velocity(m/s)
    α = acceleration of an electron
    = eε/m(C V m^-1 kg^-1)
    τ = relaxation time(s)
    e = charge of an electron(C)
    ε = electric field strength(V/m)
    m= mass(kg)
  3. 3Current densityJ = neV(D)=ne^2 τε/m
    Where J = current density (A m^-2)
    n = electron density(m^-3)
    e = charge of electron(C)
    V(D) = drift velocity = eετ/m (m/s)
    τ = relaxation time(s)
    ε = electric field strength(V/m)
    m= mass(kg)
  4. 4Electrical conductivityσ = J/ε = ne^2 τ/m = neμ
    Where μ = electron mobility
    (m^2 V^-1s^-1)
    σ = electrical conductivity(Siemens/m)
    J = Current density(A m^-2)
    ε = Eletric field strength(V/m)
    n = electron density(m^-3)
    e =charge of an electron(C)
    τ = relaxation time(s)
    m= mass(kg)
  5. 5Electron mobilityμ = eτ/m = V(D)/ε
    Where μ = electron mobility
    (m^2 V^-1s^-1)
    e =charge of an electron(C)
    τ = relaxation time(s)
    m= mass(kg)
    ε = Eletric field strength(V/m)
    V(D) = drift velocity = eετ/m (m/s)
  6. 6Thermal drift velocityV(d) = 3/2KdT/dx τ/m
    Where K = Boltzmann constant
    (m^2 kg s^-2 k^-1)
    t= temperature(k)
    dT/dx the rate of change of temperature with respect to distance(k/m)
    τ = relaxation time(s)
    m= mass(kg)
  7. 7"Heat current"U = (3/2)^2 nk^2 dT/dx τ/m
    Where U = Heat current
    n = electron density(m^-3)
    k = Boltzmann constant
    (m^2 kg s^-2 k^-1)
    dT/dx the rate of change of temperature with respect to distance(k/m)
    τ = relaxation time(s)
    m= mass(kg)
  8. 8Thermal conductivityK = U/(dT/dx) =(3/2)^2 nk^2 T τ/m
    Where K = Thermal conductivity
    U = Heat current
    n = electron density(m^-3)
    k = Boltzmann constant
    (m^2 kg s^-2 k^-1)
    dT/dx the rate of change of temperature with respect to distance(k/m)
    τ = relaxation time(s)
    m= mass(kg)
  9. 9Wiedemann-Franz LawK/σT = (3/2)^2 (k/e)^2
    Where σ = electrical conductivity(S/m)
    K = Thermal conductivity
    k = Boltzmann constant
    (m^2 kg s^-2 k^-1)
    e = charge on an electron(C)
  10. 10Hall coefficientR(H)=1/ne
    Where R(H) = Hall coefficient(m^3/C)
    n = electron density(m^-3)
    e = charge of an electron(C)
  11. 11Hall coefficient semi conductorsR(H) = 3π/8ne
    Where R(H) = hall coefficient(m^3/C)
    n = electron denisty(m^-3)
    e = Charge of electron(C)
  12. 12Specific heat of free electron gasdU/dT = 3nk/2
    Where U = heat current
    T =temperature(k)
    n = electron density(m^-3)
    k = boltzmann constant(m^2 kg s^2 k^-1)
  13. 13Schrodinger equation inside the well∂^2ψ/∂x^2 +2m/ħ Eψ=0
    Where ψ = wavefunction
    x = position(m)
    m = mass(kg)
    E = Energy of electron(J)
  14. 14What are the two factors that effect electron velocity through the material?-Thermal-energy
    -applied electric field
  15. 15What are the contributions to the kinetic energy based on the 3 dimensions of movementEach particle has 3 degrees of freedom which each contribute to 1/2 kT
  16. 16What happens to the electric field component of the velocity when the electron collides with a lattice ion and why?The electron loses the componenet as the electron is much lighter than the ion
  17. 17What are the two factors that determine conductivity-the electron or charge carrier concentration
    -The electron mobillity
  18. 18What happens to an electron when it has excess thermal energyIt will tend to diffuse into the colder region
  19. 19What do charge carriers experience in a magnetic fielda force
  20. 20Explain what happens in a metal when charge carriers are moving in the x direction and there is a magnetic field in the z directionThere will be a force in the y direction which will have the effect of buuilding up charge concetration leading to an electric field in the y direction which will oppose the force
  21. 21Energy levels in an infinite potential wellE = ħ^2 n^2 π^2 /2mL^2
    Where E = energy of energy level(J)
    n = energy level number
    m = mass of electron(kg)
    L = width of well(m)
  22. 22Energy level in an infinite potential well in 3-dE = (ħ^2 π^2 /2mL^2) (n(x)^2 + n(y)^2 + n(z)^2)
    Where E = energy of energy level(J)
    n(x,y,z) = energy level number in given dimension
    m = mass of electron(kg)
    L = width of well(m)
  23. 23In terms of neergy what can be say about the (n(x), n(y), n(z)) values of (2,1,1), (1,2,1) and (1,1,2)They are degenerate
  24. 24In the potential well what happens to the energy difference as you go up the energy levelsThe differences in energy increases at as increasing rate
  25. 25Define the density of statesThe number of states having energy between E+dE
  26. 26Equation for density of statesZ(E)d(E) = (4πV/h^3) (2m)^3/2 E^1/2 dE
    Where V = L^3 = volume of potential well (m)
    m = mass of electron(kg)
    E = energy of level
  27. 27Probability that a state is occupiedF(E) = 1/1+exp(E-E(F)/KT)
  28. 28What is the probabillity function like at 0k and >0kWhat is the probabillity function like at 0k and >0k
  29. 29Equation for total number of electrons in a sampleN = int(0,∞) F(E)Z(E)dE
    Where N = total number of electrons
    F(E) = probability function
    Z(E) = density of states
  30. 30Fermi energy equationE(f) = (3n/8π)^2/3 h^2/2m
    Where E(f) = Fermi energy(J)
    n = N/V =electron denisty(m^-3)
    N = Total number of electrons
    V = Volume
    m = mass of electron
  31. 31What is thermionic emissionthe emission of electrons through heating a material
  32. 32Electron distribution of energiesN(E) = Z(E)F(E)
    Where N(E) = the electron distribution of energies
    Z(E) = density of states(j^-1 V^-1)
    F(E) = probability that a state is occupied
  33. 33Work functionΦ = E(b) - E(F)
    Where Φ = work function(j)
    E(b) = energy barrier(j)
    E(F) = fermi energy
  34. 34Richardson-Dushman equationj = AT^2 exp(-Φ/kT)
    Where j = current density
    A = Richardson's constant(Am^-2 K^-2)
    T = temperature(k)
    Φ = Work function
  35. 35What are the reason's for deviations from the Richardson Dushman equation-The apparent work function increases if a negative sace charge exists in the region of the cathode. The anode potential should be sufficiently large to prevent space charge build up
    -the apparent work function decrease with increasing external field(The shottky effect)
    -The work function itself is a function of temperature due to thermal expansiob and the fact that the fermi level is a function of temperature
    -ther derivation of the equation assumes a single work function emitter. This is rarely the case since Φ generally will vary with direction within the crystal
    -Surface conditions can strongly affect Φ , even small quantities of aDsorbed gases will have considerable effect
    -the macroscopic area of the emitter may not equal the actual surface area
  36. 36What happens to the energy barrier(E(b)) when an electric field is appliedIt decreases
  37. 37Potential energy of an electron at a distance x from the surfaceV(x) = -e^2/16πε(0)x
    Where V(x) = potential energy of the electron(J)
    e = charge of an electron(C)
    x = distance from electron to surface(m)
  38. 38Effective work functionΦ(eff) = Φ - e(eE/4πε(0))^1/2
    Where Φ(eff) = the effective work function(J)
    Φ = work function(J)
    e = Charge on an electron(C)
    E = electric field strength
  39. 39What is needed of the wavefunction for tunneling to occurIt can't be zero at the barrier
  40. 40What happens to the amplitude of the wave function when inside the barrierIt decays exponentially
  41. 41What is the photoelectric effect?emission of electrons from a metal surface due to absorbtion of electromagnetic radiation
  42. 42Photoelectric effect equationK.E. = hv-Φ
    Where K.E. = the kinetic energy of the released electron(J)
    v = frequency of incident photon(Hz)
    Φ = work function
  43. 43What happens when two metals are brought into contact that have different fermi levels(contact potential)Electrons move from the higher energy region to the lower energy region an the fermi levels equalise. This make the higher energy region metal positive and it has lost electrons and the lower energy region metal more negative as it has gained electrons
  44. 44Why can't contact potential be used as a batteryThis is an equilibrium state and as per the second law of thermodynamics no energy can be extracted from it
  45. 45Energy of a free electronE = ħ^2 k^2/2m = p^2/2m
    Where E = energy of the electron(J)
    k = wavenumber
    m = mass of electron
    p = momentum
  46. 46What isw the shape of an E-k graphA parabola
  47. 47effective massm* = ħ^2/(d^2E/dk^2)
    Where m* = effective mass(kg)
    d^2E/dk^2 = second derivative of energy with respect to wavenumber
  48. 48Phase velocityv=dω/dk = 1/ℏ dE/dK
    Where v = phase velocity(m/s)
    ω = angular frequency(rad/s)
    k = wavenumber
    E = energy(j)
  49. 49Where is the fermi energy in a metalHalfway up the conduction band
  50. 50Where is the fermi energy in an undoped semi conductorhalfway between the valence and conductance bands
  51. 51What happens to the conductivity of a metal and a semi conductor as temperature increases?For a semiconductor it increases whilst for a metal it decreases
  52. 52intrinsic charge carrier concentrationn(i)^2 =np
    Where n(i) = intrinsic charge carrier concentration
    n = density of electrons per unit volume(m^-3)
    p = denisty of holes per unit volume(m^-3)
  53. 53Describe n-type dopingreplacing group 4 semiconductor atoms with atoms from group 5 to increase the number of free electrons
  54. 54Describe p type doingReplacing group 4 semi conductor atoms with atoms from group 3 which incerases the number of holes
  55. 55What happens to the fermi level when an instrisic semi conductor is n-type dopedThe fermi level moves up
  56. 56What happens to the fermi level when an instrisic semi conductor is p-type dopedThe fermi level moves down
  57. 57electron number density equationn=N(c)exp(-(E(c)-E(f))/KT)
    Where n = charge carrier concentration(m^-3)
    N(c) = effective density of states in the conduction band =
    2(2πm(e)^* KT/h^2)^(3/2)
    m(e)^* = effective mass of an electron(kg)
    T = temperature(k)
    E(C) = energy at bottom of conduction band(J)
    E(f) = fermi energy(J)
  58. 58hole number density equationP = N(v)exp(-(E(f)-E(v))/KT)
    Where P = hole dumber density(m^-3)
    N(v) = effective density of states in the balence band = 2(2πm(p)^* KT/h^2)^(3/2)
    m(p)^* = effective mass of holes
    T = temperature(k)
    E(f) = fermi energy(j)
    E(V) = energy at the top of the valence band(j)
  59. 59number denisty/carrier concetration of intrisic electronsn(i) = (N(c)N(v))^(1/2) exp(-Eg/2kT)
    Where n(i) = number denisty/ carrier concetration of instrinsic electrons
    N(c) = effective density of states in the conduction band = = 2(2πm(e)^* KT/h^2)^(3/2)
    m(p)^* = effective mass of holes
    T = temperature(k)
    E(g) = energy gap(j)
  60. 60What happens to the fermi level when the charge carrier concetration increases and whythe fermi energy moves up. This is because n increases and since N(c) is constant as well as K and T. Therefore E(c)-E(f) must decrease so E(f) increases
  61. 61What happens to the fermi level as the hole number density increases and whythe fermi energy moves down. This is because N(v) is constant as well as KT. Therefore E(f) -E(v) must decrease so E(f) decreases.
  62. 62What is a direct band gap semi conductorThe maximum in the valence band is directly below the minimum of the conduction band
  63. 63What particle is released when an electron and a hole pair recombine and whats it's energy.A photon is released which will have energy E(g)
  64. 64What is an indirect band gapWhere the maximum of the valence band and the minimum of the conduction band don't align.
  65. 65particle momentum equationp=ħk
    Where p = momentum(kg m/s)
    k = wavenumber(1/m)
  66. 66What is needed for inderirect band gap hole recombination and how does this happenThe k value(or momentum) must change. For this to happen a phoNon must interact with the electron.
  67. 67What is a phoNona quantised "packet" of lattice vibrations
  68. 68Current equationI = Q/t
    Where I = current(A)
    Q = charge(C)
    t = time(s)
  69. 69drift currentI(d) = nqAv(d)
    Where I = drift current
    n = charge carriers per unit volume(m^-3)
    q = charge on carriers
    A = area of semiconductor(m^2)
    v(d) = velocity of charge carriers(m/s)
  70. 70Velocity of charge carriersv(d) = μE
    Where v(d) = velocity of charge carriers(m/s)
    μ = drift mobility(cm^2 V^-1 s^-1)
    E = electric field(V/m)
  71. 71Name the 3 factors that effect charge carrier mobilityPhonons
    impurities and lattice imperfections
    hole or electron
  72. 72How do phonos effect charge carrier mobility?When phonons collide with the charge carriers it changes the direction of the charge carrier
  73. 73What's the relationship between phonon scattering and temperatureμ(L) ∝ 1/T^(3/2)
    Where μ(L) = mobility due to lattice scattering(m/s)
    T = temperature
  74. 74How can imurities effect charge mobility?impurities upset the perfect periodic potential of a perfect lattice and will thus impede the flow of hcarge carriers in the semi conductor. This is especially true for ionised donor and acceptor impurities which will scatter electrons and holes as they pass. This is know as ionised ipurity scattering
  75. 75average thermal veloicty of a charge carrier in a crystalv(th) = (3kT/m^*)^(1/2)
    where v(th) = average thermal velocity of charge carrier in crystal(m/s)
    T = temperature(k)
    m^* = effective mass of the electron or hole
  76. 76What is the relationship with mobility due to lattice impurities and temperatureμ(I) ∝ T^(3/2)
    Where μ(I) = mobility due to impurities(m/s)
    T = temperature(k)
  77. 77Which has a higher mobility electrons or holes and why?Electrons as they are free to move whilst holes rely on the movement of electrons
  78. 78Total current densityJ = J(n) + J(p) = nqμ(n)E+Pqμ(p)
    Where J = total current density(A m^-2)
    J(n) = current density from electrons
    (A m^-2)
    J(p) = current denisty from holes(A m^-2)
    n = number of electrons
    q = charge of an electron(C)
    μ(n) = mobility of electrons(m/s)
    E = electric field strength(V/m)
    P = number of holes
    μ(p) = mobility of holes(m/s)
  79. 79Conductivityσ = J/E = nqμ(n) + Pqμ(p)
    Where σ = electrical conductivity(Siemens/m)
    J = total current density(A m^-2)
    E = electri filed strength(V/m)
    n = number of electrons
    q = charge of an electron(C)
    μ(n) = mobility of elctrons(m/s)
    P = number of holes
    μ(p) = mobility of holes
  80. 80diffusion current densityJ(diff) = -qDdn/dx
    Where J(diff) = diffusion current density(A m^-2)
    D = diffusion constant
    dn/dx = concetration gradient(m^-1)
  81. 81What happens in a p-n junction diodeThe p-n junction diode consists of a signle crystal of a semiconductor, onpe portion has been doped n-type and one portion has been doped p type. The electrons diffuse from the n-type region to the p-type region and fill some holes. At the same time holes diffuse from the p-type region to the n-type region and are filled by electrons(known as recombination). Before this both sides were electrostatically neutral. this means the p-type will become net negative and the n-type side will become net positive. This creates a potential difference across the junction
  82. 82Explain the difference in resistance for a p-n junction diode between forward bias and reverse biasIn forward bias the holes are moving from the p-type region and the electrons are moving from the n-type region. Since there are a large amount on each side the current flows easily. In reverse bias holes and elecdtrons have to move from the opposite side to before. Since there are less of them the current flow is much smaller
  83. 83What must line up when drawing the band diagram for a p-n junction diode?The fermi levels
  84. 84What must electrons overcome to diffuse from the n-type region to the p-type region?a potential barrier, qV(bi)
  85. 85Why don't holes want to travel down the valence band slopeenergetically they tend to travel up slopes
  86. 86potential barrier heightV(bi) = KT/q ln(np/ni^2)
    Where V(bi) = potential barrier height
    T = temperature(k)
    n= number of electrons
    p = number of holes
    ni = intrisic charge carriers
  87. 87What the energy needed for an electron to surmount the potential barriereV(bi)
  88. 88In a LED how is light producedit is a p-n junction diode in forward bias and when the electron combines with a hole they annihilate each other. in this the electron is moving from a higher energy state to a lower energy state therefore energy is released in the form of a photon of light.
  89. 89What is the energy of a photon which is released from a diodeE = E(g) = hc/λ
    Where E = energy of photon(j)
    E(g) = energy gap between conduction and valence band(j)
    λ = wavelength of light
  90. 90How does a solar cell workWhen a unlight is abosrbed at the p-n junction an electron is excited from the valence band to the conduction band, creating a free electron and a free hole. The electric field at the junction pulls the electron towards the n-type region and the hole towards the p-type region. This means that a negative charge flows into the n-type region and a positive charge flows into the p-type region.
  91. 91What are the differences for 3-5 semiconductors over group 4 conductorsDifferent wavelengths of light can be absorbed or emitted and the mobilities of holes and electrons can be higher.
  92. 92What's a ternary compound semiconductorA semi conductor that has 3 elements from group 3 or 5 whilst maintaing the total quatity of group 3 and group 5
  93. 93What does laser stand forlight amplification by stimulated emission of radiation
  94. 94What is unique about laser lightit's coherent(in phase) and monochromatic(single wavelength)
  95. 95How is stimulated emision achievedA photon needs to collide with an electron and can cause the electron to drop into the valence band producing another photon of the same energy
  96. 96What is spotaneous emissionwhen an electron moves from the conduction band to the valence band without being affected by anything else and releasing a photon
  97. 97Between stimulated and spotaneous which is coherent and non coherentStimulated is coherent as the two photons are released at the same time
  98. 98describe the curve for a laser diodeAt low currents below the threshold current the laser undergoes spotaneous emission producing incoherent light. above the threshold stimulated emission starts and the output increases. This light produced is coherent. At high currents the power output saturates
  99. 99What is the difference between the a semiconductor diode and an LEDThere is a much greater number of electron hole pairs in the laser, which is necessary to produce the conditions for stimulated emission.
    The laser has a pair of end mirrors. These serve to reflect some photons back into the p-n region where emission is occuring, which produces more stimulated emission
  100. 100What is the strucutre of a semiconductor laser diodeWhat is the strucutre of a semiconductor laser diode
  101. 101Describe what happens in a High electron mobility transistor(HEMT) and explain how it improves mobilityThe ionised impurities which can't move are in the ndoped region but the electrons congregate in the undoped section.
    The region in which they congregate in a two dimensional electron gas so the charge carriers are seperated from the ionised impurities. This means that ionised impurity scattering is decreased which increases the mobility of the electrons
  102. 102describe a metal oxide semiconductor field effect transistor(MOSFET) and explain how it worksThere are 3 pieces of metal called the source gate and drain. These are attached to a layer of oxide which is attached to a semi conductor. The source and gate go thorugh the oxide and touch the semiconductor. The souce is positivly charged and the drain is negatively charged. In the semiconductor it is mainly n-type doped apart from two p-type doped areas which are directly below and attached to the source and drain. When the gate it made negative the electrons near the gate are repelled from it whilst the holes are attracted. If this is made negative enough then there will be an area where holes are the majority carriers. This is known as carrier inversion. When this is achieved a p-type channel is opened between the source and the drain. This means that holes can flow

Información

Descripción
Fichas sobre CMP, creado por daniel upton el 04/04/2021.
Creado por
daniel upton
Visitas
0
Valoración

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?