Mind Map by , created over 6 years ago

Construction Technology and environmental services T013 Mind Map on M&E, created by alison_patey0437 on 04/17/2013.

Created by alison_patey0437 over 6 years ago
Study Plan
PMP Prep quiz
Andrea Leyden
Mapas mentales con ExamTime
ICT GCSE flashcards
Catherine Archer
1PR101 2.test - Část 6.
Nikola Truong
T013 Asbestos
NRM Cost Definitions
NRM Cost Definitions
Mohammed Sayid
NRM Cost Definitions
1 Heating
1.1 Radiators
1.1.1 key points simple and compact Occupants familiar with function low maintianance good temp control range of styles = flexible to layouts
1.1.2 limitations slow thermal response heat output is convective can lead to uneven temperature gradient in the space furniture must be positioned sympathetically to avoiding obstructing the heat output the combination of windows that can be opened and perimeter radiators can result in excessive heat loss if the windows are poor design
1.1.3 Used in naturally ventilated building
1.1.4 located around perimeter walls offset cold down drafts from glazing and prevent condensation forming on glass
1.1.5 temperature control achieved through thermostatic radiator valves (TRVs) individual and local control
1.1.6 two basic types pressed steel panel cast extruded type - normally alluminium
1.2 Convectors
1.2.1 Key points quicker warm up times in comparison to radiators fan convectors provide high heat output for the unit size convection current by unit provides good air movement fan convectors provide greatly enhanced heat output and air movement the casing can reduce the risk of burning which can occur with radiators
1.2.2 Limitations Dust/dirt collects in the casing which required periodic cleaning trench convectors tend to accumulate dirt an the grille can become covered by furniture fan convectors incorporate many components and lack the simplicity of radiators and natural convectors require a power supply
1.2.3 Natural convectors casing with top and bottom openings Enter text here
1.3 Radiant Heating
1.4 Warm air unit
1.5 boilers
2 Ventilation
3 Air-conditioning
3.1 introduction to Air con systems
3.2 Constant volume (CV)
3.3 Variable air volume (VAV)
3.4 Displacement ventilation
3.5 fan coils
3.6 chilled beams
3.7 chilled ceilings
3.8 Room-based heat pumps
3.9 split systems
3.10 Variable refrigerant flow systems (VRF)
3.11 Chillers, dry coolers and cooling towers
4 Controls

Media attachments