Ajude a dar forma ao GoConqr. O que a gente deve adicionar?

Quiz

Chapter 6: Check Your Understanding

Antje C. 10 perguntas

Fazer o quiz

Perguntas do quiz (10)

  1. 1Which statement is true concerning configuring static routes using next-hop addresses?
    1. ARouters cannot use more than one static route with a next-hop address
    2. BWhen the router identifies that a packet is destined for a route associated with a next-hop address in the routing table, the router requires no further information and can immediately forward the packet
    3. CRouters configured with the static route using a next-hop address must either have the exit interface listed in the route or have another route with the network of the next hop and an associated exit interface
    4. DRoutes associated with a next-hop address are more efficient than routes going to exit interfaces
  2. 2Which of the following are three characteristics of a static route? (Choose three)
    1. AReduces the memory and processing burdens on a router
    2. BEnsures that there is always a path available
    3. CUsed to dynamically find the best path to a destination network
    4. DUsed for routers that connect to stub networks
    5. EUsed for networks with a single route to a destination network
    6. FReduces configuration time
  3. 3Which option shows a correctly configured IPv4 default static route?
    1. Aip route 0.0.0.0 0.0.0.0 S0/0/0
    2. Bip route 0.0.0.0 255.255.255.0 S0/0/0
    3. Cip route 0.0.0.0 255.255.255.255 S0/0/0
    4. Dip route 0.0.0.0 255.0.0.0 S0/0/0
  4. 4A network administrator enters the following command into Router1: ip route 192.168.0.0 255.255.255.0 S0/1/0. Router1 then receives a packet that is destined for 192.168.0.22/24. After finding the recently configured static route in the routing table, what does Router1 do next to process the packet?
    1. ADrops the packet because the destination host is not listed in the routing table
    2. BLooks up the MAC address of the S0/1/0 interface to determine the destination MAC address of the frame
    3. CPerforms a recursive lookup for the IP address of the S0/1/0 interface before forwarding the packet
    4. DEncapsulates the packet into a frame for the WAN link and forward the packet out the S0/1/0 interface
  5. 5What type of static route is created when the next-hop IP address and exit interface are specified?
    1. ARecursive static route
    2. BDirectly connected static route
    3. CFully specified static route
    4. DFloating static route
  6. 6Why would a summarized static route be configured on a router?
    1. ATo reduce the number of public IP addresses required by an organization
    2. BTo provide a better route than a particular routing protocol
    3. CTo provide a default gateway for a router that connects to an ISP
    4. DTo reduce the size of the routing table
    5. ETo reduce the size of the routing protocol update to a neighboring router
  7. 7Which subnet mask would be used for a network that has a maximum of 300 devices?
    1. A255.255.255.0
    2. B255.255.254.0
    3. C255.255.252.0
    4. D255.255.248.0
    5. E255.255.240.0
  8. 8Which two conditions must exist in order to summarize IPv6 routes into a single static IPv6 route? (Choose two)
    1. AThe destination networks are contiguous and can be summarized into a single network address
    2. BThe multiple static routes all use different exit-interface or next-hop IPv6 addresses
    3. CThe destination networks are not contiguous
    4. DThe multiple static routes all use the same exit-interface or next-hop IPv6 address
    5. EThe administrative distance is greater than the administrative distance of another static route or dynamic route
  9. 9What command, or set of commands, would be used to determine if the following configuration on router HQ works as designed?
    ip route 0.0.0.0 0.0.0.0 serial 0/0/0 10

    ip route 0.0.0.0 0.0.0.0 serial 0/1/0
    1. AHQ(config)# interface serial 0/1/0
      HQ(config-if)# shutdown
      HQ(config-if)# end
      HQ#show ip route
    2. BHQ# traceroute 128.107.0.99
    3. CHQ# show ip interface brief
    4. DHQ# ping 128.107.0.99
      HQ# ping 64.100.0.5
    5. EHQ# show ip route
  10. 10Which is a valid summary route for networks 192.168.8.0/22, 192.168.12.0/22, and 192.168.16.0/22?
    1. A192.168.0.0/18
    2. B192.168.0.0/19
    3. C192.168.0.0/20
    4. D192.168.8.0/21

Informações

Descrição
College Cisco Networking (ITCC1404: Chapter Quizzes) Quiz sobre Chapter 6: Check Your Understanding, criado por Antje C. em 07-05-2015.
Idioma
English
Visualizações
0
Etiquetas
cisco networkingitcc1404: chapter quizzescollege
Avaliação
Ainda sem avaliações
Avalie este quiz
Avalie este quiz

Mais sobre Static and Default Routes

Fale Conosco

Sobre o que é sua mensagem?

O que a gente deve adicionar?