Quiz
IBM C9530-001 - IBM Integration Bus v10.0 Solution Development
Perguntas do quiz (122)
1In automatic mode, which property of a TimeoutNotification node can be changes via a Timer configurable service so it overrides the value set in the node properties
- AStart Date
- BStart Time
- CTimeout Interval
- DTransaction Mode
2What would the command mqsichangebroker ibnode -f 10.0.0.3 do
- AInstall fixpack 10.0.0.3
- BRemove fixpack 10.0.0.3
- CChange the function level of ibnode
- DChange the operation mode for the ibnode
3When using the MQTTPublish Node to route messages, how can it be determined if the message was published successfully
- ACheck the Boolean in LocalEnvironemnt.Destination.MQTT.Output.retained in a node wired to the Out terminal of the MQTTPublish Node
- BCheck the Boolean in LocalEnvironemnt.WrittenDestination.MQTT.Output.retained in a node wired to the Out terminal of the MQTTPublish Node
- CCheck the Boolean in LocalEnvironemnt.Destination.MQTT.DeliveryToken.is Complete in a node wired to the Out terminal of the MQTTPublish Node
- DCheck the Boolean in LocalEnvironemnt.WrittenDestination.MQTT.DeliveryToken.is Complete in a node wired to the Out terminal of the MQTTPublish Node
4While creating an integration transformation service with IBM Integration Bus which scenario can not use the graphical data mapper?
- AXML to non-XML data mapping
- BSQL sub-queries to fields on the Output Tree
- CEnvironment variable to a field on the Output Tree
- DSimple database insert, update and delete operations
5When message flow processing has paused at a breakpoint in the message flow, which of the following is true for the Flow Debugger?
- AThe user can examine the message content
- BBreakpoints can only be removed one by one
- CThe user can update the structure of the message trees and reference variables
- DVariables view in the Debug perspective shows Java static variables
6An IBM Integration Bus developer has configured Event monitoring on MQInput Node for all the messages that hit the In terminal and the Out terminal of the node. When a batch of 10 different messages was processed through this Integration flow, 2 messages field to be parsed art MQInput Node and 18 events were seen to be fired. What could the developer do to see 20 events fired in the next run with same batch of messages
- ARestart the message flow
- BRestart the Integration Server
- CCheck the configuration for the DataCaptureSource
- DAdd Monitoring event for the Failure terminal on MQInput Node
7What capabilities does the developer have using the Integration Bus Web User Interface, assuming no security is configured
- AA. Delete the Integration Node
View the integration server
View the message flow - BB. View the Integration Node
Delete the Integration Server
Delete the message flow - CC. Delete the Integration Node
Delete the Integration Server
View the message flow - DD. Only view the Integration Node
Only view the Integration Server
Only view the message flow
- AA. Delete the Integration Node
8What tool can be used to create a new configurable service
- AWeb User Interface
- BIBM Integration Toolkit
- CIBM Integration Explorer
- DIBM Integration Admin Tool
9How should the transportPropagationConfig be set to configure a message flow for identity propagation?
- Athe Boolean value TRUE
- Bthe user name of the identity
- Cthe name of the configuration file for the security profile
- Dthe resource name created with the mqsisetdbparms command
10Which statement regarding the AppDomain in a .NETCompute Node is true?
- ACode sharing an AppDomain can share state
- BThere is no way to share data among different AppDomains
- CA domain neutral assembly can be unloaded without unloading the whole AppDomain
- DWhen a .NET assembly code is changed and swapped, the message flow must be stopped and restarted to pick up the change.
11What group must users be added to in order to be able to deploy?
- Aroot
- Bmqm
- Cadmin
- Dmqbrkrs
12While processing messages, an Integration flow containing MQInput node seems to stop picking up messages from the Input queue as the Input queue current depth keeps increasing. Where will the Integration Node report any issues?
- ASyslog
- BMessage Flow Statistics
- CTrace Node output
- DIntegration Server stderr and stdout
13A developer wants to create a REST API using the Create a REST API Wizard. What does the developer need before starting the wizard?
- AA SOAP file
- BA WADL document
- CA Swagger 2.0 document
- DA sample of the JSON that will be handled
14Which log can be checked to see if a web user has accessed a certain resource in Web UI?
- AAdmin Log
- BSystem Log
- CIntegration Node stdout
- DIntegration Server stdout
15Which part of the logical message tree is where the message flow writes information about exceptions that occur when a message is processed?
- AErrorList
- BSystem Log
- CExceptionList
- DException log
16A developer is using the default maxConnectionPoolSize for their JDBC connection. To help determine if this property should be tuned for better performance, what tool can be used to monitor JDBC connection pool behavior?
- AUser trace
- BService trace
- CResource statistics
- DAccounting statisticsvv
17Which IBM supplied messages can be imported to create in new message definition file?
- ATDS
- BMRM
- CBLOB
- DSOAP
18A developer wants to convert a single project with no references to an application. What step needs to be taken after importing the project?
- AWith the project selected, File>export>Application
- BWith project selected, File>save-as>Application
- CRun command mqsimigratecomponents against project
- DRight click project and select Convert to application or library > Convert single project
19Which statement regarding the invoking of stored procedures is true
- AA stored procedure can only return one result set
- BA stored procedure can be overloaded with a different number of parameters
- CThe PASSTHRU statement can be used to call the stored procedure by using the SQL command
- DThe parameter types may not match as long as the external name of the procedure matches a procedure in the database.
20How are the pattern properties from the exemplar projects associated with the Pattern Authoring project?
- AThe exemplar projects are associated with project references
- BThe exemplar project and the Authoring project must be in the same Workspace
- CThe exemplar project and the Authoring project must be in the same Working Set
- DPatterns properties must be added manually and then selected in the exemplar project
21How can the Eclipse error logs in the Toolkit be viewed?
- AError Log view in the Toolkit
- BProblems view in the Toolkit
- CSelect Integration flow>error log
- DRight-click Application container in Toolkit > Error logs
22Which of the following are operational policies for IBM Integration Bus?
- AMQClient, MQQMGR
- BMQPublish, MQSubscribe
- CMQEndpoint, MQTTEndpoint
- DMQEndpoint, MQTTPublish, MQTTSubscribe
23Which of the following are available in IBM Integration Bus for administration? (Choose two.)
- AIBM Integration API
- BMQ Administration Client
- CIBM Integration Bus Explorer
- DWeb Services Administration Client
- EIBM Integration Web User Interface
24An IBM Integration Bus pattern is created using an Exemplar integration solution and variants are also identified. Nodes will be added to the flow based on the variant values. How can the dynamic pattern be implemented?
- AMultiple options are added into the exemplar for controlling the dynamic behavior of the pattern.
- BPatterns are generated dynamically and a Configurable Service may be configured to control the generation process.
- CThe pattern generation does not support any method of controlling the instantiation of the pattern and should be done outside the pattern.
- DThe pattern is created using the exemplar solution. Java class is created to extend the exemplar to add nodes dynamically by using the Flow API.
25How can a develop configure IBM Integration Bus to use an external Operational Decision Manager (ODM) engine?
- ANo changes need to be made in the DecisionService Node
- BWhen starting the broker specify the DecisionService ODM agent
- CBy setting notifications on ODM in the Rule Execution Server management console
- DSpecify the DecisionServiceRepository configurable service in the DecisionService node
26To monitor the speed at which Integration flow are processing messages, the message flow notification threshold has been configured in Workload management with additional Instances, commitInterval and commitCount. However, no notification messages are received. What property was not set?
- AstartMode
- BprocessingTimeoutSec
- CprocesingTimeoutAction
- DnotificationThresholdMsgsPerSec
27Which statement is true regarding globally coordinated XA transactions with the broker?
- AJMS transactions do not support XA
- BThe coordinatedTransaction flag must be set in the BAR file for enabling XA transactions with the broker
- CIt does not require the configuration of the queue manager to coordinate XA transactions with the broker
- DWhen message flows participate in transactions with MQ as well as a Database, unless XA transactions are enabled, the flow can commit the database transaction but not the MQ transaction.
28Which node can be used to generate an exception and force an error path through the message flow?
- ATrace Node
- BThrow Node
- CValidate Node
- DTryCatch Node
29The following XML is an example of which policy document?
- AMQEndpoint
- BMQTTPublish
- CMQTTSubscribe
- DWorkload management
30Which keyword in the Declare statement allows User-defined properties to be used as variables in ESQL?
- ASET
- BSHARED
- CIMPORT
- DEXTERNAL
31Which Enterprise Information System is not supported by the JCA adapter in IBM Integration Bus?
- ASAP
- BSiebel
- CPeopleSoft
- DMicrosoft Dynamics ERP
32An IBM Integration Bus developer is testing Integration flow with the Flow Exerciser by processing the different messages through the flow and recording each one of them. At a later time, the developer would like to see the state of the logical message tree for each message instance. How can this be done?
- ABy selecting the connector highlighted in red
- BThe developer can only view the last message processed
- CBy right-clicking message flow > Properties > Show recorded messages
- DBy selecting ‘Send a message to the flow’ and selecting the recorded message
33A developer needs to create a message flow that will read messages from a JMS provider and output them unchanged to an IBM MQ queue. What nodes are needed in the message flow?
- AJMSInput and MQOutput only
- BJMSInput, JMSHeader and MQOutput
- CMQInput, MQJMSTransform and JMSOutput
- DJMSInput, JMSMQTransform and MQOutput
34When a developer needs to use the same Java classes in multiple solutions, how should those classes be stored for maximizing reuse?
- AApplication
- BStatic library
- CShared library
- DMessage flow project
35How can the embedded global cache be configured to read replica shards?
- ABy using the MbGlobalMap class constructor
- BBy configuring the Configuring Service for the embedded global cache
- CBy configuring the deployment.xml file and specifying the deployment policy to the Integration Server
- DReplica shrads cannot be configured in the embedded global cache but only in the eXtreme Scale grid
36How is a secured and trusted communication link between IBM Integration Bus (IIB) and Business Process Manager (BPM) built.
- AEnable WS-Security on both BPM and IIB.
- BProgrammatically encrypt the outgoing messages
- CAdd a certificate to the truststore to set up the SSL communication between BPM and IIB.
- DThere is no need to build a security link because BPM and IIB should always be deployed on the same network behind the firewall.
37Which operating system requires an MQ Queue Manager when running IBM Integration Bus?
- Az/OS
- BHP-UX
- CSolaris
- DMicrosoft Windows
38A developer is creating a new message flow that will be deployed to an Integration Node running Scale edition on Linux after migrating from WebSphere ESB.
The developer needs to implement some computation. Which compute node can the developer use?- ACompute
- BPHPCompute
- CJavaCompute
- D.NETCompute
39Which statement about local maps is true?
- AA local map can be called from an ESQL procedure
- BA local map can be defined by clicking File->Name->Local Map
- CA local map is an independent resource with a physical file associated
- DThe scope of a local map is the message map. A local map is processed with the messagemap
40If an Integration Node contains four Integration Servers, using the default topology, how many catalog and cache container servers will be hosted?
- AOne catalog server and two cache container servers
- BTwo catalog servers and two cache container servers
- COne catalog server and four cache container servers
- DThree catalog servers and one cache container servers
41What is the most common method for testing a DFDL model in the toolkit?
- AUse the DFDL tester to parse the sample data file
- BAdd a breakpoint into sample test data and use the debugger
- CThe DFDL schema can be validated by right clicking on the sample data
- DThe DFDL parser can only be tested when a sample test data is passed into message flow from the Input Node
42In a Compute Node the Transaction mode is set to automatic and the "Throw exception on database error" is unchecked. How can the develop check on specific SQL codes and control the Commit or Rollback of the transaction from the ESQL Compute module?
- ACheck the SQLCODE and conditionally return false for handling Rollback or return true for further processing.
- B"Throw exception on database error" should never be unchecked when the Transaction mode is set to automatic.
- CCheck the SQLCODE and conditionally THROW an exception for handling Rollback or return true for further processing.
- DCheck the SQLCODE and conditionally run the ESQL function ROLLBACK or COMMIT for handling Rollback or Commit respectively.
43Application data that comes from a C or COBOL application, or consists of fixed-format binary dat a should belong to which message domain?
- AMIME domain
- BDFDL domain
- CSOAP domain
- DDataObject domain
44An Integration flow contains a Trace Node with the pattern ${Root} and destination User Trace. What does it write to the User Trace?
- AThe entire message
- BOnly the ExceptionList
- CNo Trace Node records are written
- DOnly the header and body of the message
45How would a developer record and save the snapshot of a message and Local Environment and then display and replay the message in the Toolkit?
- ARun a user trace
- BUse Record & Replay
- CUse the Flow Exerciser
- DInsert a trace node in the message flow
46What type of container is used to store one set of resources that are needed by multiple applications for maximum reuse?
- AApplication
- BStatic library
- CShared Library
- DDynamic library
47When using the RegisrtyLookup Node to submit queries to WebSphere Service Registry and Repository, where are the entities returned by the query stored?
- AIn a predefined variable of the Array type
- BIn the ServiceRegisrty field in the LocalEnvironment
- CIn one of the output terminal of the RegisrtyLookup Node
- DIn a shared variable that makes the data available to subsequent nodes
48WebSphere Service Registry & Repository (WSRR) data may be cached in the IBM Integration Bus (IIB) Integration Node. How can updates made to WSRR be reflected in the IIB cache?
- AIIB WSRR cache can be pre-loaded based on query files but may not be updates
- BJMS subscriptions may be set up for the WSRR Configurable Service for cache updates
- CThe cache can only be updated at specific intervals based on the timeout value set in the configurable services.
- DThe caching may be turned off. This is the only way the changes in WSRR may be reflected in the Integration Node directly.
49While debugging a message flow a redeployment of the flow hangs. What could be the source of the problem?
- AA backout queue name was not defined
- BThe debugger is waiting on a breakpoint
- CNo additional instances of the flow was defined
- DThe jvmDebugport was not defined on the Integration Server
50Which format of Accounting and Statistics is only available on z/OS systems?
- AXML
- BSMF
- CJSON
- DUsertrace
51When choosing the Destination property on a Trace Node to the Local Error log, what else must be set?
- AThe Message Catalog property
- BThe Message Number property
- CBoth the Message Catalog property and Message Number property
- DNothing else needs to be set
52What is the difference between a Static and Shared library in IBM Integration Bus?
- AShared libraries may include additional jar files while Static libraries cannot.
- BShared libraries can be deployed to an Integration Server while Static libraries cannot.
- CShared libraries encapsulate common code that may be used by multiple applications while Static libraries do not.
- DMultiple applications can reference the same Shared library without having to include the library as part of the build as in the case of Static library.
53How does global cache help resolve message affinity issues with request/reply scenario when scaling IBM Integration Bus nodes?
- AThe requests and replies may be collected in the global cache for audit.
- BThe global cache improves the performance of the request/reply message communication.
- CRequest messages are sent to the back end and synchronized through the global cache lock.
- DThe incoming information may be saved in the global cache with the message id as the key and correlated on any server form the correlation id.
54Which of the following statements is true if transaction is set to automatic in the Compute Node property?
- AThe node participates in XA transactions
- BThe database transaction is committed at the end of the flow
- CThe property refers to ESQL transactions and not database transactions
- DThe database transaction is always committed regardless of the transaction status of the flow.
55When a Java conditional expression is defined for a transform operation in a message map, which statement is true?
- AJava methods that use the DOM API cannot be used.
- BOnly Java methods can be used with standard Java types.
- CJava methods that include MbElement data type arguments can be used.
- DThe Java class provided to the map must have static methods that return Boolean values.
56An integration flow was found to be running slower than expected on an AIX system. It was found that /var/mqsi/common.log was continuously growing in size.
Why would this be happening?- AAbends are getting created.
- BCore dumps are getting created.
- CA trace or accounting and statistics has been left enabled.
- DAn Integration flow referencing lots of JARs was deployed to the Integration Server.
57What is the advantage of defining an MQ Service in IBM Integration Bus (IIB)?
- AThe MQ Service definition is required for any MQ interactions with IIB.
- BThe MQ Service creates an application to send and receive messages from a queue.
- CTo reuse the connection and queue definition in the MQ Nodes and WSDL in an Integration Service.
- DThe MQ Service creates SOA-based service automatically reducing effort to create and deploy the service.
58Which statement regarding Identity Mapping is true?
- ACustom token mapping can not be implemented for identity propagation
- BIdentity Mapping can be performed in output nodes, if the output node has been configured with a security profile
- CWhen mapping from an X.509 certificate, Tivoli Federated Identity Manager can verify the identity of the original sender.
- DIdentity Mapping is the transformation of a security token from one format to another format within another security realm.
59Which node can process a collection built with the Collector Node?
- ARoute Node
- BCompute Node
- CSequence Node
- DDecisionService Node
60What is the difference between setting security on the MQInput Node and the PEP Node?
- AThere is no functional difference between the two, it is more of a design option.
- BSecurity Profile can be overwritten on the BAR file for PEP Node but not for the MQInput Node.
- CThe PEP Node can not be used in a message flow unless the MQInput Node has security settings turned on.
- DThe MQInput Node validates the authentication of the input message before it is processed by the flow. The PEP Node processes messages inside the flow.
61When using the IBM Integration Bus Toolkit, how can the results of a deploy be checked?
- AEvent Monitoring
- BIIB log command
- CToolkit workspace log
- DToolkit Deployment log
62What is the result of the command: mqsiapplybaroverride -b will -k Ben -m Ken#maximumRateMsgsPerSec=100?
- AIt will set the maximumRateMsgsPerSec property on BAR "will" for Integration flow "Ben" in Application "Ken".
- BIt will configure Workload Management to monitor the maximum message processing rate for an Integration flow.
- CIt will set the maximumRateMsgsPerSec property to 100 on BAR "will" for Integration flow "Ken" in Application "Ben".
- DIt will configure Workload Management to monitor the maximum amount of time that Integration flow is allowed to process a message.
63Which optional component is required to enable global transaction support?
- ACICS
- BIBM MQ
- CIBM TXSeries
- DThird-party transaction manager
64In the following diagram an input message comes in that does not match any of the routing rules. The default terminal of the Route Node is not wired and the failure terminal of the Route node is wired to ROUTE FAIL. Where does the message go?
- ATo the Failure queue.
- BNowhere, it is discarded.
- CTo the dead letter queue.
- DTo the ROUTE FAIL queue.
65A developer is testing an Integration flow using the Flow Exerciser and finds an error. He tries to debug the flow, but the debugger does not start. What needs to be done to start the flow debugger?
- ASet the debug port number.
- BRestart the Integration node.
- CRestart the Integration Server.
- DStop the Flow Exerciser recording.
66Application data that comes from a C or COBOL application, or consists of fixed-format binary data should belong to which message domain?
- AMIME domain
- BDFDL domain
- CSOAP domain
- DDataObject domain
67What is one way to check what a BIP2308E error means?
- AEnable a trace
- BRun flow exerciser
- CRun the command mqrc 2308
- DRun the command mqsiexplain 2308
68Given the following set of applications and libraries, which are all deployed to the same Integration Server, what must be done to provide a new version of the MasterSchema.xsd file to AppA and AppB?
- ADeploy the new version of the MasterSchema.xsd file to the Integration Server.
- BPlace the new version of MasterSchema.xsd in the MasterLibrary and deploy the MasterLibrary to the Integration Server.
- CPlace the new version of MasterSchema.xsd in the MasterLibrary and then redeploy the AppA and AppB applications to the Integration Server.
- DPlace the new version of MasterSchema.xsd directly in AppA and AppB and then redeploy the AppA and AppB applications to the Integration Server.
69A developer has multiple applications that require different versions of specific resources. How should the different versions of the common resources be stored to allow for this?
- AAdd all common resources to an subflow.
- BAdd all common resources to a static library.
- CAdd all common resources to a shared library.
- DAdd all common resources to an application project.
70In the RegistryLookup and EndpointLookup nodes, there are three JNDI related configuration properties: connectionFactoryName, initialContextFactory and locationJNDIBinding. What are these configuration properties used for?
- ATo define the JMS entries for cache notification.
- BTo specify where the result of the query should be saved in JNDI.
- CTo specify how to access WebSphere Service Registry and Repository (WSRR) in order for the nodes to submit a query.
- DTo define the location of the administrative objects for the WebSphere Service Registry and Repository (WSRR).
71How can a developer set the maximum number of messages processed by a message flow in the flow exerciser?
- ASet in the Web UI.
- BSet in the Toolkit Preferences.
- CUse the command mqsichangeproperties.
- DSet the number of additional instances for the message flow.
72How does IBM Integration Bus allow for the debugging of Pattern Projects?
- ACreate a run configuration in eclipse since there is no default support in the Pattern Editor.
- BThe Pattern Project is deployed to the Integration Server similar to any application and debugged from the server.
- CThe Debug Pattern support in the Pattern Editor builds and launches the pattern plugin in a new Toolkit instance and stops at any breakpoints in the Java code.
- DThe eclipse Run Configuration support is incompatible with the Pattern Project. The only way to test the project is to generate the plugin and install it in a separate installation of the Toolkit in a different node.
73Several applications in an organization use a common Java library, commom.jar. Two applications App1 and App2 have their own shared libraries shlib1.jar and shlib2.jar that reference common.jar. Which deployment method allows for the most reuse of the Java Library?
- ADeploy all the jar files as static libraries.
- BDeploy all the jar files as part of the applications.
- Ccommon.jar deployed as a shared library along with the shlib1.jar and shlib2.jar as shared libraries.
- Dshlib1.jar and shlib2.jar must now be deployed as static libraries and common.jar as a shared library.
74In order for a MQEndpoint policy to use a CCDT file, what must be done in addition to setting the ccdt property?
- ACreate a configurable service to specify the CCDT file path.
- BRun the mqsichangepolicy command to specify the CCDT file path.
- CRun the mqsichangeproperties command to specify the CCDT file path.
- DSet the CCDT file path as a BAR file override in any BAR file that uses the MQEndpoint policy.
75In what format does the Flow Exercise save the message processed through the integration flow?
- AXML
- BBLOB
- CSame format as the input message
- DGives user a choice to save it in user-preferred format
76Which type of container can allow for runtime isolation, ensuring that updates to one group of deployed resources do not affect another group?
- AApplication
- BMessageSet
- CShared Library
- DDynamic Library
77Which node supports the propagation of an LTPA v2 token in IBM Integration Bus?
- AMQOutput
- BHTTPRequest
- CSCAAsyncRequest
- DSOAPAsyncRequest
78A developer is migrating SOA based applications to IBM Integration Bus Toolkit. There are existing WSDL files that are available to the developer. Which solution type should the developer select?
- AApplication
- BIntegration Project
- CIntegration Service
- DPattern Authoring Project
79Which terminal is wired to check for any exceptions within the node?
- AIn Terminal
- BError Terminal
- CThrow Terminal
- DFailure Terminal
80Which of the following statement regarding the SAPInput Node is true?
- ADFDL domain can be used to model ALE configuration and IDocs.
- BThe SAPInput Node must always be paired with the SAPReply Node in the same message flow.
- CWhen the processing in the message flow is done, the SAPReply Node opens a new connection to the SAP program and send the response back to SAP.
- DWhen a listener receives a call from SAP in synchronous mode, it blocks processing until the message can be picked up by an available message flow instance that contains the SAPInput Node.
81An IBM Integration Bus Administrator has configured the configurable services DataCaptureStore, DataCaptureSource and DataDestination and ensured the WebUI users are setup correctly. However, when running messages through the Integration flow, nothing gets recorded into the database. What could be the missing step in the configuration of the message flow?
- AThe Integration flow was not started.
- BThe Integration flow was not deployed.
- CThe monitoring events were not created/enabled.
- DThe recording was not enabled using the command mqsichangeflowrecording.
82How should a Developer move an IBM Integration Bus installation and its components to another physical location?
- AUninstall and reinstall in the required location.
- BCopy and paste the associated files to required location.
- CUse the mqsimigratecomponents command.
- DUse the mqsibackupbroker and mqsirestorebroker command.
83Which statement about the DFDL parser and domain is true?
- AThe DFDL parser is not an on-demand parser.
- BDFDL domain is not intended for general text and binary message formats.
- CDFDL domain is intended for parsing and writing XML or JSON formatted messages.
- DThe DFDL parser interprets a bit stream by using grammar defined in a DFDL schema file.
84A flow started from an MQInput Node has multiple database interactions from Compute, Java Compute and Map Nodes. All relevant node transactional properties are set to automatic. XA is not configured. Where are the transactions committed in the flow?
- ABoth databases and the MQ transactions are committed at the end of the flow.
- BMQ transactions are committed at the end of the flow but each database interaction is committed as the message is propagated from the Out terminal.
- CSince there is only one MQ Node the MQ transaction is committed while propagating from the Out terminal of the MQInput Node and all the database interactions are committed at the end of the flow.
- DEach of the nodes mentioned has a Transaction property to determine the transactional nature of the node and is always committed when propagating from the Out terminal independent of any other Nodes in the flow.
85Which destination can a trace node output not to be written to?
- AFile
- BConsole
- CUser Trace
- DLocal Error Log
86Which is true regarding MQ topology options for IBM Integration Bus?v
- AOnly local bindings to MQ Queue Managers are supported for the MQInput node.
- BMQ is an optional component that is not required unless using MQ transport nodes.
- CThere is a one to one relationship required between MQ Queue Manager and Integration Node.
- DMQ can be used to create flexible connection topologies.
87What is one to set the flow debugger port?
- AUse the mqsichangebroker command to set the debug port.
- BUse the mqsichangedebugport command to set the debug port.
- CIn the IBM Integration Bus Toolkit set the debug port in the Preferences.
- DIn the IBM Integration Bus Toolkit right-click on the Integration Server and set the debug port.
88Which statement is a reason to use external eXtreme Scale data cache with IBM Integration Bus?
- AThe data cache must be Highly-Available within a data center
- BThe data cache must be shared across multiple Integration Nodes.
- CThe data cache must be shared across multiple Integration Servers.
- DData replication across data centers is required for Continuous Availability.
89Which statement is true regarding IBM Integration Bus (IIB) integration with Business Process Manager (BPM)?
- AIIB can only communicate with BPM through SOAP messages.
- BA BPM integration service can be added as an operation to an existing IIB service.
- CAfter a BPM integration service is created, the business logic flow can be added before it is imported into IIB.
- DA BPM integration service definition must be exported from a BPM Toolkit in order for it to be imported into IIB.
90Two different sets of applications are deployed to Integration Server 1 and Integration Server 2 respectively, as shown in the image below.
What is the advantage of using the Integration Server embedded HTTP listener to the Integration Node listener?
- AFailover
- BLoad balancing
- CBetter throughput
- DSingle IP address for HTTP clients to use
91Which node can be used to capture failures for a sequence of nodes?
- ATrace Node
- BCollector Node
- CTryCatch Node
- DPassthrough Node
92On a Linux system, trace node is configured with Destination set to a file. The trace node should be executed if a message processes successfully. A message is processed through the Integration flow successfully but no file is written. How can the problem be determined?
- AThis error only happens if the file system is full.
- Bcheck the console logs (stderr/stdout) for any errors.
- CThe only way to debug this problem is to start the flow debugger.
- DCheck the local system error logs to see if there were any errors encountered while writing to the trace node output file.
93Which command is used to display the version of all the installed components?
- Aiib verify
- Bmqsilist
- Cmqsiversion
- Diib version
94In configurable services that have the UserDefined type, which node is used to read and modify properties dynamically at run time?
- APHP node
- BMapping node
- CCompute node
- DJava Compute node
95The security team has informed the Integration Bus developers that they need to start using SSL when using the web user interface. Administration security is still disabled. What does the developer need to do to now access the web user interface?
- AChange the URL used to the new port being used by HTTPS.
- BSetup a keystore on the queue manger, import the private key and then change the URL used to the new port being used by HTTPS.
- CHave the administrator use the mqsiwebuseradmin command to create a new web user and then change the URL used to the new port being used by HTTPS.v
- DTurn on administration security, have the administrator use the mqsiwebuseradmin command to create a new web user and then change the URL used to the new port being used by HTTPS.
96How can end-to-end transactionality be achieved in a SOAP message flow?
- ABy selecting transaction Yes for JMS binding.
- BBy having the SOAP call interact with a database transaction.
- CBy having persistent sessions with SOAP over HTTP binding.
- DInteractions between SOAP operations must implement SOAP fault messages.
97What is one method to keep the cache clean in IBM Integration Bus?
- ADefine a timeout parameter in the Policy file.
- BUse the MbGlobalMapSeccionPolicy class to expire the Global Cache variable.
- CSet up an external process to check the variables that have not been modified in a speculated amount of time and remove them.
- DUse remove() on the MbGlobalMap class. In case of a catastrophic crash of the node, the cache will detect this and remove the variable implicitly.
98What is the result of the command mqsisetdbparms -n DB2_1 -u test -p test123?
- ACreates a security identity for DB2_1.
- BSets the database parameters test and test123 for DB2_1.
- CConnects to the database DB2_1 with user test and password test123.
- DCreates service userld "test" and password "test123" for the Integaration node "DB2_1".
99A developer has used version and keyword information to keep track of the different Integration solutions being developed. What command is used to display this information?
- Amqsilist
- Bmqsireadbar
- Cmqsiversion
- Dmqsiservice
100Which statement about the XSLTransform node is true?
- AThe output of an XSLTransform node is always structured in XML.
- BThe XSLTransform node can transform a binary input message into an XML message.
- CIn the XSLTransform node, external functions can be called to enrich the transformation.
- DThe XSLTransform node can sort the data using the rules defined in the XSLT style sheet.
101While processing messages in a message flow, Java exceptions are encountered. Where should more details on these Java exceptions be found?
- Asyslogs
- BTrace Node output
- CIntegration Node stderr and stdout
- DIntegration Server stderr and stdout
102How does a developer assign Pattern properties from a message flow?
- ABy selecting the Pattern Target properties from any node any message flow.
- BPattern properties must be configured in a Pattern Authoring project before selecting targets.
- CAll properties in a message flow must be tagged for the Pattern Authoring Project to identify them.
- DBy adding a reference all the Node properties are automatically exposed to the Pattern Authoring Project.
103What are two options for creating an MQEndpoint policy? (Select 2.)
- AUse the BAR file editor.
- BUse Integration Bus Explorer.
- CUse the mqsicreatepolicy command.
- DUse the mqsiattachpolicy command.
- EUse the Integration Bus web user interface.
104What can the DatabaseInput node be configured to do?
- AInsert data in a database.
- BUpdate data in a database.
- CUpdate the local environment tree.
- DRetrieve data from a database.
105Which statement about the .NETCompute Node is true?
- AThe exception is propagated through a predefined output terminal.
- B.NETCompute node does not support dynamic terminal. All terminals are predefined.
- CThe message assembly contains four trees to represent the message, the environment, the local environment and the exception list.
- DOnly when the message needs to be transformed through the .NETCompute node, an Evaluate method is needed. In the case of the message pass-through, there is no need for an Evaluate method.
106Which statement regarding security profiles is true?
- AMultiple security providers cannot be created in one security profile.
- BA security profile can be created for LDAP or a WS-Trust V1.3 STS.
- CThe command mqsichangeconfigurableservice can be used to change a security profile.
- DIf WS-Trust v1.3.STS is selected for more than one operation, the WS-Trust URL must be different and unique for each of the operations.
107The format of a policy UPL is apiv1/policy/MQTTSubscribe/Test. What policy has the developer created?
- AMQTTSubscribe Policy 1
- BMQTTSubscribe Policy Test
- CMQTTSubscribe Policy apiv1
- DMQTTSubscribe Policy policy
108A message flow is started with JMSInput node and no Message Domain is specified. The flow received an input message of type TextMessage with no JMSType header included. What would the default message domain be as the message is propagated out of the node?
- AXML
- BBLOB
- CXMLNSC
- DJMSStream
109A service interacts with a backend system which replies with a message correlation. When processing request/response messages from the backend, no messages were received by the flow.
- AThe transaction was set to automatic on the MQOutput Node.
- BThe developer should have used the MQInput Node instead of the MQGet Node.
- CThe Integration Node is configured in a MQ cluster for load balancing and the object descriptor is set to the ReplyToQueueManager.
- DThe backend request/reply message processing can only be accomplished by breaking up the flow into two flows.
110A developer plans to create two new message flows. Flow1 that uses TimeoutControl and TimeoutNotification nodes in Controlled mode, and Flow2 that uses only the TimeoutNotification node in Automatic mode.
The Integration Node is installed on a system without IBM MQ installed. What problems will the developer encounter?- AFlow1 will not deploy successfully. Flow2 will not deploy successfully.
- BFlow1 will not deploy successfully. Flow2 will deploy and execute successfully.
- CFlow1 will not deploy successfully. Flow2 will deploy successfully but will produce an error when execution is attempted.
- DFlow1 will deploy successfully but produce an error when execution is attempted. Flow2 will deploy and execute successfully.
111While developing a REST API what node should a developer use to receive messages?
- AMQInput Node
- BJMSInput Node
- CHTTPInput Node
- DSOAPInput Node
112An Integration Server contains a shared library with a common error handling routine. The shared library is redeployed with an updated error handling routine with some new logging. When will the applications that use the shared library start using the updated routine?
- AImmediately
- BWhen the Integration Node is restarted.
- CWhen the Integration Server is restarted.
- DAfter each application that uses the shared library is redeployed.
113A developer creates a message flow that uses a DecisionService Node. Which command must the developer use before deploying the message flow?
- Amqsicvp
- Bmqsimode
- Cmqsichangebroker
- Dmqsichangeproperties
114In the User Trace output shows the following message:
2016-04-12 16:17:18.242605 5344 UserTrace BIP2539I: Node
‘Reply.MapToRequestor’: Evaluating expression ”I + 1” at (‘MapToRequestor.CopyMessageHeaders’, ‘6.14’). This resolved to ”1 + 1”. The result was ”2”.
What does 6.14 indicate here?- ALine 6, Column 14 in the CopyMessageHeaders node.
- BLine 14, Column 6 in CopyMessageHeaders node.
- CColumn 6, line 14 in the CopyMessageHeaders function of MapToRequestor.
- DLine 6, Column 14 in the CopyMessageHeaders function of MapToRequestor.
115Which protocol for security is not supported by IBM Integration Bus?
- AOAuth 2.0
- BSAML assertion
- CX.509 certificate
- DUser Id + Password
116A developer is trying to investigate slow processing times with a specific message flow. What tool would be used to investigate this?
- AService trace
- BDebug mode
- CResource Statistics
- DAccounting and Statistics
117When using the set of aggregation nodes, how does a developer tie the fan-out flow with the fan-in flow when it is included within the same message flow?
- ANo properties need to be set, since the fan-out and fan-in flows are in the same messages flow.
- BSet the Aggregate Name property of the AggregateReply Node to the same value that you set for the Aggregate Name property in the corresponding Collector Node.
- CSet the Aggregate Name property of the AggregateReply Node to the same value that you set for the Aggregate Name property in the corresponding AggregateControl Node.
- DSet the Aggregate Name property of the AggregateReply Node to the same value that you set for the Aggregate Name property on each of the corresponding AggregateRequest Nodes in the fan-out flow.
118Which tool allows a configurable service to be imported and exported between systems?
- ABroker Explorer
- BWeb User interface
- CIBM Integration Toolkit
- DIBM Integration Explorer
119A message flow reads messages from a queue Database Node fails to insert data in the table. If no error handling and rollback is implemented in the message flow, which of the following statements is true?
- AThe transaction is by default rolled back in a globally coordinated manner.
- BThe message fails the Input Node and cannot be propagated out of the Out terminal. The transaction is rolled back.
- CThe error is caught by the MQ Input Node and if the Catch terminal is not connected the message is rolled back into the queue.
- DThe message flow rolls back the database transaction but not the MQ transaction unless a XA coordinated transaction is configured.
120What is the first step in creating an IBM Integration Bus (IIB) based pattern?
- AEvery new application may require a pattern. So start with creating a pattern project.
- BIdentify an exemplar project and the variants to be replaced in the generated instance.
- CCreate a Java class that may be used in the pattern generation for changing the default behavior.
- DInvestigate how to create eclipse plugin since the IIB patterns are built as eclipse plugins for the toolkit.
121How can WebSphere Service Registry & Repository (WSRR) information be pre-loaded into the IBM Integration BUS (IIB) cache before sending any messages to the message flow?
- ABy subscribing to WSRR notifications.
- BAdding predefinedCacheQueries to a custom policy within WSRR.
- CBy using the predefinedCacheQueries parameter in the Configurable Services for the broker.
- DWSRR data cannot be loaded into the IIB cache without sending a message that accesses the WSRR node.
122Which statement about the Cloned node is true?
- AThe Cloned node can be used to create reusable templates for Mapping node.
- BThe Cloned node can be used to create reusable templates for .NetInput node.
- CThe Cloned node can be used to create reusable templates for XSLTransform node.
- DA new Cloned node can be used selected from a palette drawer and be assigned properties.
SHOW ANSWERS
Posted in: C9530-001
Leave a Reply
Your email address will not be published.
Comment
Name
Please enter an answer in digits:
13 − eight =
This site uses Akismet to reduce spam. Learn how your comment data is processed.
VCEplus 10% OFF:
10HAPPY2022
(Code expires on Dec-24-2021)
VCE to PDF Converter
Informações
- Descrição
- IBM Integration Bus v10.0 Solution Development
- Autor
- Alexis Padilla
- Idioma
- Español
- Visualizações
- 118
- Histórico
- Criado em 17 dez 2021 · atualizado em 21 dez 2021
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz