O GoConqr está de visual novo! Conte para nós o que você achou.

Flashcards

CPU components and operation: von Neumann architecture

Linh Phan Alemão 9 flashcards

Flashcards do conjunto (9)

  1. 1What are components of Neumann-Machine?- CPU (Central Processing Unit) with CU (Control Unit) & ALU (Arithmetic Logic Unit)
    - Memory Unit
    - Input/Output device
    - Bus system
  2. 2What is the critical aspect of the bus system in VNR?Only one component reach the bus at one time
    Collision when more then 1 components sending signal via the bus system => data will be lost if collision happens
    => slow working time
  3. 3What does Programme Counte (PC) do?- PC points to the current instruction handled by the processor
    - PC is updated tot he next instruction
    - CU fetches the next instruction from the location the PC points to and prepares the execution of it by the ALU
  4. 4What are register?- A digital memory area integrated in the CPU
    - No delay by accessing
    - Content can be used immediately by CU and ALU
  5. 5How much data can the register contain?usually as many bits (8, 16, 32, 64) as the processor can handle altogether in one instruction
  6. 6Describe how the processor work?- CPU executes instructions in clock cycles
    - Depending on the instruction, the data from one or multiple registers is taken as input and calculated during one or more cycles. Result is written back to a register
    - Data is transferred between registers and main memory (or cache) in cycles as well: get new instructions and data; wirte back results
    - Usually, the instructions have to be decoded by the CU before being executed by ALU
  7. 7Control Unit (CU)- A component of CPU
    - is responsible for the sequential processing of programs in the memory
  8. 8How does CU work?- CU send the address of the current instruction to the memory
    - CU receives the instruction as answer from memory
    - CU perform the newly received instruction
    - The cycle repeats
  9. 9What are the components of a CPU? (from processing view)- Program counter (PC): contain the address of the current instruction (manages by CU). This will be send to memory
    - Instruction register (IR): contain the instruction received from memory, which muss be performed by CU

Informações

Descrição
FlashCards sobre Sem título, criado por Linh Phan em 08-05-2018.
Criado por
Linh Phan
Visualizações
0
Avaliação

Mais sobre Processor Architecture and Components

Fale Conosco

Sobre o que é sua mensagem?

O que você acha do novo visual?

Você gostou?