O GoConqr está de visual novo! Conte para nós o que você achou.

Flashcards

Understanding Waveforms (Mod.6 Sect.2 Part 1)

That Yeti Dog Person Electronics Technician Career Diploma Inglês 53 flashcards

Flashcards do conjunto (53)

  1. 1A sine wave is ____ when it has no harmonic frequencies.pure
  2. 2A _____________ is a multiple frequency of a basic frequency.harmonic frequency
  3. 3The length of a phasor is always ______ to the maximum voltage.equal
  4. 4You can lay ____ radians arcs along the circumference of a half circle.pi
  5. 5pi radians = ____°180
  6. 6At resonance, inductive reactance ______ capacitive reactance.equals
  7. 7The action of one body being set into vibration by a second vibrating body with the same natural frequency is called __________ vinration.sympathetic
  8. 8_________ Resonance - the condition existing in a body when the frequency of an applied vibration equals the natural frequency of the bodyMechanical
  9. 9An example of mechanical resonance is a _________.tuning fork
  10. 10When the output signal is used to control the input signal, the system/circuit is called an _______.oscillator
  11. 11Tuning fork oscillators are used at relatively low frequencies; typically ______ to _____ hertz.400, 1,000
  12. 12A mechanical oscillator similar to a tuning fork uses a piece of vibrating piezoelectric material, and is usually called a _______ oscillator.crystal
  13. 13_________ oscillators need higher frequencies due to the thickness of the piezoelectric material.Crystal
  14. 14Tuning forks and crystal oscillators are both called _______ oscillators.mechanical
  15. 15Oscillators that don't use vibrations usually use ______ circuits to produce the oscillations and often require bulky components when used to make low frequency signals.LC
  16. 16Oscillators that use LC circuits to produce vibrations are called ___________ oscillators.electromechanic
  17. 17There are electric circuit that oscillate at a single frequency known as their _______ frequency.resonant
  18. 18If there's resistance in a series capacitive/inductive circuit, the phase angle between the V and C is always less than ____º.90
  19. 19The phasor for Xc (capacitive reactance) is _____.-jXc
  20. 20The phasor for Xl (inductive reactance) is _____.+jXl
  21. 21A (+) before a phasor means the voltage _____ the current.leads
  22. 22A (-) before a phasor means the voltage _____ the current.lags
  23. 23If L and C are in resonance in an RLC circuit, only ____ controls the circuit current.R
  24. 24High resistance causes the circuit to tune more ______. (vice versa)broadly
  25. 25The impedance of a _____ parallel LC circuit is very high.basic
  26. 26When resistors are connected across a parallel tuned circuit to lower the total Z and purposely get wider frequency response, they're called ________ resistors.swamping
  27. 27A ______ is a circuit that's designed to eliminate (or greatly reduce) the intensity of an unwanted signal.trap
  28. 28The resistance in a trap circuit is usually distributed in the ____ and ____ branches.L, C
  29. 29A parallel trap allows all frequencies to enter the receiver except the undesired frequency, which is the ______ frequency of the trap.resonant
  30. 30A series trap passes the unwanted frequency to ground; it's also the trap's _______ frequency.resonant
  31. 31An __________ trap is a trap that absorbs energy from the undesired signal.absorption
  32. 32In a series-tuned LCR at resonance, the current through the circuit is at ________ and the voltage & impedance are at ________.maximum, minimum
  33. 33In a parallel-tuned LCR at resonance, the current though the circuit is at ________ and the voltage & impedance are at ______.minimum, maximum
  34. 34An increase in capacitance ______ the resonant frequency of the circuit. (vice versa)lowers
  35. 35In a series-resonant RLC circuit, the generator V and C are _____ phase.in
  36. 36In a series-resonant RLC circuit, impedance is at _________ at resonance.minimum
  37. 37The expression "basic parallel-resonant circuit" refers to a parallel LC that has no _______ in the reactive branches.resistors
  38. 38In a basic parallel-resonant circuit, the generator current & voltage are ______ phase.in
  39. 39In a basic parallel-resonant circuit, the inductive reactance _______ the capacitive reactance.equals
  40. 40In a basic parallel-resonant circuit, the impedance is _________ at resonance.maximum
  41. 41Quality factor is represented with the letter ___.Q
  42. 42The higher the ____ of the inductor and capacitor, the sharper the LC resonant circuit will tune.Q
    (quality factor)
  43. 43A pure sine wave has ____ harmonic content.no
  44. 44A sine wave can be considered to be a waveform generated by a ___________.rotating phasor
  45. 45A _________ is a mechanical resonant device used for higher output power.tuning fork
  46. 46What is the name of a drawing that illustrates the amplitudes of the frequencies which pass through a filter circuit?response curve
  47. 47In a sine wave generated by a rotating phasor the length of the phasor is _______.constant
  48. 48At resonance the current through a parallel-resonant LC circuit is at _______.minimum
  49. 49Phasor impedance (z) may be written in what two forms?polar, rectangular
  50. 50You want to lower the frequency of a series resonant LC circuit, so, you increase the value of ____.L
  51. 51If you want a narrow bandwidth for a series RLC circuit you need a low value of ____.R
  52. 52Sharper tuning in a series resonant RLC circuit is obtained with a _____ value of R.lower
  53. 53Scientifically, the Q of a coil or capacitor is a comparison of the amount of energy______ and the amount of energy ______ in a component.stored, lost

Informações

Descrição
Career Diploma Electronics Technician (Module 6 - Basic Electronics (Section 2)) FlashCards sobre Understanding Waveforms (Mod.6 Sect.2 Part 1), criado por That Yeti Dog Person em 09-06-2022.
Visualizações
0
Avaliação

Fale Conosco

Sobre o que é sua mensagem?

O que você acha do novo visual?

Você gostou?