Mapa mental
The Basics of Capacitance

Conteúdo do mapa
The Basics of Capacitance
Capacitors
- store electric charge
- Capacitance- charge stored per unit PD
- Unit- Farad (F) = CV^-1
- Micro, Nano or picofarad capacitors most common.
- Unit- Farad (F) = CV^-1
- Capacitance- charge stored per unit PD
- Made of Two Parallel plates....
- C=V/Q
- capacitance=Potential difference/charge
- store electric charge
Parallel plate capacitors
- Permittivity- resistance of a material to an electric field
- Affected by:
- surface area of plates
- distance apart
- insulating material
- Higher Permittivity=larger charge stored
- Affected by:
- Dielectric constant- measure of permittivity
- Multiple of relative permittivity, ε0
- Permittivity of vacuum
- ε0=8.854x10^-12
- εrε0- specific capacitor
- Multiple of relative permittivity, ε0
- C=(εrε0A)/d
- Capacitance=dielectric constant x Area /separation of plates
- Charge density proportional to V/d - electric field, E
- Q/V=(εrε0A)/d
- Q/A=(εrε0V)/d
- Permittivity- resistance of a material to an electric field
Dielectric heating
- dielectric materials- insulating material where atoms can be polarised
- polar molecules- like water!
- Dielectric material between plates
- atoms align themselves to charge
- polarity switched, atoms rotate-
- Kinetic, and therefore Thermal energy!
- polarity switched, atoms rotate-
- atoms align themselves to charge
- dielectric materials- insulating material where atoms can be polarised
Graphs
- V over Q
- gt = capacitance
- area= energy stored
- gt = capacitance
- E=1/2QV
- E=1/2CV^2
- E=1/2Q^2/C
- E=1/2CV^2
- V over Q
Charge and discharge
- Time is a factor in these circuits
- Time constant, τ- related to half-life of the charge of capacitor
- τ=RC
- R=resistance of resistor C=capacitance
- linked to cutoff frequency- stops working efficiently
- f=1/2πRC
- time to increase charge to 63.2% capacity
- time to decrease charge to 36.8% capacity
- τ=RC
- Time constant, τ- related to half-life of the charge of capacitor
- Time is a factor in these circuits
Charging RC Circuits
- Current will decrease
- I=ε/R initially, to 0
- PD will increase
- V= 0 initially, to ε
- sum of PD across resistor and capacitor=0 at any time
- V= 0 initially, to ε
- positive and negative plates
- electrons flow into one plate and out of other
- DO NOT JUMP PLATES
- electrons flow into one plate and out of other
- Current will decrease
Discharging RC circuuts
- current will decrease
- I=-ε/R initially, to 0
- PD of resistor=PD of capacitor
- PD decrease from ε to 0 once fully discharged
- current will decrease
Imagens e arquivos do mapa
Informações
- Descrição
- Mapa Mental sobre The Basics of Capacitance, criado por Millie Chick em 22-08-2018.
- Criado por
- Millie Chick
- Visualizações
- 1
- Avaliação
Mais sobre Capacitors and Capacitance

