CCNA2-Chapter 6: Static Routing

CCNA2-Chapter 6: Static Routing

1. 6.1.1.1 Reach Remote Networks

   • Static Routing Implementation
     • Why Use Static Routing?
       • When to Use Static Routes

2. 6.1.2.1 Static Route Applications

   • the following types of IPv4 and IPv6 static routes will be discussed: Standard static route Default static route Summary static route Floating static route
     • 6.1.2.2 Standard Static Route
       • 6.1.2.3 Default Static Route
         • 6.1.2.4 Summary Static Route
           • 6.1.2.5 Floating Static Route

3. 6.2.1.1 ip route Command

   • Static routes are configured using the ip route global configuration command.
     • 6.2.1.2 Next-Hop Options
       • 6.2.1.3 Configure a Next-Hop Static Route
         • In a next-hop static route, only the next-hop IP address is specified.
           • 6.2.1.4 Configure a Directly Connected Static Route
             • 6.2.1.5 Configure a Fully Specified Static Route
               • 6.2.1.6 Verify a Static Route

4. 6.2.2.1 Default Static Route

   • A default route is a static route that matches all packets.
     • 6.2.2.2 Configure a Default Static Route
       • 6.2.2.3 Verify a Default Static Route

5. 6.2.3.1 The ipv6 route Command

   • Static routes for IPv6 are configured using the ipv6 route global configuration command.
     • 6.2.3.2 Next-Hop Options
       • 6.2.3.3 Configure a Next-Hop Static IPv6 Route
         • In a next-hop static route, only the next-hop IPv6 address is specified.
           • 6.2.3.4 Configure a Directly Connected Static IPv6 Route
             • When configuring a static route on point-to-point networks, an alternative to using the next-hop IPv6 address is to specify the exit interface.
               • 6.2.3.5 Configure a Fully Specified Static IPv6 Route
                 • 6.2.3.6 Verify IPv6 Static Routes
                   • 6.2.4.1 Default Static IPv6 Route
                     • 6.2.4.2 Configure a Default Static IPv6 Route
                       • 6.2.4.3 Verify a Default Static Route

6. 6.3.1.1 Classful Network Addressing

   • 6.3.1.2 Classful Subnet Masks
     • 6.3.1.3 Classful Routing Protocol Example
       • 6.3.1.4 Classful Addressing Waste
         • 6.3.2.1 Classless Inter-Domain Routing
           • 6.3.2.2 CIDR and Route Summarization
             • 6.3.2.3 Static Routing CIDR Example
               • 6.3.2.4 Classless Routing Protocol Example
                 • 6.3.3.1 Fixed-Length Subnet Masking
                   • 6.3.3.2 Variable-Length Subnet Masking
                     • 6.3.3.3 VLSM in Action
                       • 6.3.3.4 Subnetting Subnets
                         • 6.3.3.5 VLSM Example

7. 6.4.1.1 Route Summarization

   • 6.4.1.2 Calculate a Summary Route
     • 6.4.1.3 Summary Static Route Example

8. Summarize IPv6 Network Addresses

   • 6.4.2.2 Calculate IPv6 Network Addresses
     • 6.4.2.3 Configure an IPv6 Summary Address

9. 6.4.3.1 Floating Static Routes

   • 6.4.3.2 Configure a Floating Static Route
     • 6.4.3.3 Test the Floating Static Route
       • 6.5.1.1 Static Routes and Packet Forwarding
         • 6.5.2.1 Troubleshoot a Missing Route
           • 6.5.2.2 Solve a Connectivity Problem