Quiz
JSCM Group - Network Assessment (CB)
Este quiz tem tempo limite, por isso abre no player de sempre.
Perguntas do quiz (10)
1What does a VLAN do?
- AActs as the fastest port to all servers.
- BProvides multiple collision domains on one switch port.
- CBreaks up broadcast domains on a layer 2 switch internetwork.
- DProvides multiple broadcast domains with a single collision domain.
2What statement closely identifies the difference between Half-Duplex and Full-Duplex?
- AHalf-Duplex only uses half of the cable.
- BHalf-Duplex operates at half of the connection speed.
- CFull-Duplex can send and receive data at the same time.
- DFull-Duplex requires two cables.
3What protocol does Ping use?
- ATCP
- BICMP
- CARP
- DBootP
4When configuring a default route, what is the destination network that is used?
- A255.255.255.255
- B192.168.1.1
- C0.0.0.0
- Dthe IP address of the computer itself.
5What command is used to create a backup configuration?
- Acopy running backup
- Bcopy running-config startup-config
- Cconfig mem
- Dwr mem
6You have 10 users plugged into a hub running 10Mbps half-duplex. There is a server connected to the switch running 10Mbps half-duplex as well. How much bandwidth does each host have to the server?
- A100 kbps
- B1 Mbps
- C2 Mbps
- D10 Mbps
7What command is used to determine the IP address of a Windows computer?
- AShow IP
- BIPConfig
- CConfigureNIC
- DHostAddress
8What is the Broadcast ID of the Subnet 10.20.30.1/24?
- A10.20.30.1
- B/24
- C255.255.255.0
- D10.20.30.255
9If both Ethernet and WiFi are connected at the same time, by default the Wifi connection takes priority.
- AVerdadeiro
- BFalso
10If you wanted to delete the configuration stored in NVRAM, what would you type?
- Aerase startup
- Berase nvram
- Cdelete nvram
- Derase running
Informações
- Descrição
- Assessment for JSCM Group position
- Autor
- mslater
- Idioma
- English
- Visualizações
- 31
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz