Quiz
Protein section 3
Este quiz tem tipos de pergunta que abrem no player de sempre.
Perguntas do quiz (40)
1The three dimensional or tertiary structure of a protein is determined by its secondary structure.
- AVerdadeiro
- BFalso
2Proteins that that help primary structure to fold spontaneously in an aqueous solution are called
- Achaperones
- Bcamerones
- CSSBP
- Dretinols
3The fact that most proteins can be folded and unfolded in dilute solution without any help from other molecules shows that the primary sequence contains all the information necessary for correct folding.
- AVerdadeiro
- BFalso
4There may be one or more partially folded intermediate states formed transiently along the pathway to the final folded...
- Anative state
- Bmajor transition state
- Cintermediate state
- Ddenatured state
5MOST SOLUBLE PROTEINS ARE MIXTURES OF POLAR AND NON-POLAR RESIDUES OFTEN DISTRIBUTED WITH NO REAL PATTERN ALONG THE AMINO ACID CHAIN. WHEN THIS TYPE OF SEQUENCE IS SYNTHESISED IN WATER CAN IT REMAIN AS AN EXTENDED POLYMER?
- AYes
- BNo
6What peptide groups will be able to H-bond to water
- APolar and charged R groups
- BNon-polar R groups
- CLong R groups
- DShort R groups
7Why do non-polar R groups tend to clump together
- ATo minimise the disruption of the protein
- BTo enable covalent bonding
- CTo change the affinity of the protein
8The clustering of hydrophobic side chains from different parts of the same molecule is called the
- AHydrophilic effect
- BHydrophobic effect
9This has two favourable outcomes, it minimises the total hydrophobic surface area in contact with water and it brings the polarisable hydrophobic groups together allowing van derWaals interactions to take place. What process can cause the mentioned outcome?
- Ahydrophobic effect
- Bhydrophilic effect
- Cprotein denaturation
- Dprotein condensation reaction
10What process that this image describe
- ACondensation
- BHydrolysis
- CHydrophilic effect
- DDissociation
11 Polar and charges residues tend to be on the [blank_start]surface[blank_end] making H-bonding contact with [blank_start]water[blank_end].
Polar backbone amide groups dragged into the more hydrophobic interior of the protein satisfy their H-bonds by forming [blank_start]secondary[blank_end] structural elements with other main chain donors and acceptors.
Not all [blank_start]hydrophobic[blank_end] residues can be buried and some are found in contact with water. This unfavourable outcome is offset by the many more favourable contacts made in the protein as a whole.
When hydrophobic residues cluster on the surface of a protein they usually from part of a specific [blank_start]binding[blank_end] site or form a patch of mutually interacting [blank_start]non-polar[blank_end] groups.
Protein folding is a thermodynamic compromise and is energetically very [blank_start]complex[blank_end]. Suffice it to say that although there are many hundreds of interactions stabilising a folded protein the difference in free energy between the folded and unfolded state is generally [blank_start]not that large[blank_end].- Asurface
- Binside
- Cwater
- Damino acids
- Esecondary
- Fprimary
- Gtertiary
- Hhydrophobic
- Ihydrophylic
- Jbinding
- Kinhibiting
- Lnon-polar
- Mpolar
- Ncomplex
- Ofavourable
- Pslow
- Qnot that large
- Rlarge
12Because the free energy difference between the native and the denatured state in proteins is not large it is often not very difficult to denature proteins
- AVerdadeiro
- BFalso
13 a loss in biological activity or is evidenced by the unfolded state is called.
- ADenaturation
- BInhibition
- CBinding
- DFolding
- EHydrophylic effect
14Factors that cause denaturation
- AHeat
- BDetergents
- CpH
- DPressure
- EIR
15Urea and Guanidinium hydrochloride compete for hydrogen bonds with the polar groups of the backbone and side chains. Urea and Guanidinium hydrochloride are..
- ADetergents
- BDenaturants
- CHeating factors
16Some proteins are very much more stable than others and this tend to be dictated by the
- Acompactness of their structure
- Bsize of their structure
- Cby the number of glycine residues
17The final folded polypeptide chain held together by a number of mostly non-covalent forces in its most stable structure iS the
- ATertiary structure of a protein
- BSecondary structure of a protein
- CQuaternary structure of a protein
18Identify the interactions
- Acovalent bond
- BDisulfide bond
- CSalt bridge
- DHydrogen bond
- ELong-range electrostatic interaction
- FVan der Waals interaction
19 In a folded protein the secondary structural elements fold into a compact shape stabilised by weak interactions involving polar and non-polar groups. This compact folded form is the [blank_start]tertiary structure[blank_end].
Helical segments and beta-strands are often connected by [blank_start]beta turns[blank_end].
However there are often many long stretches of amino acids between [blank_start]secondary structural elements[blank_end].
These loops are usually found at the [blank_start]surface[blank_end] of the protein and often protrude out into the solvent.
The loops are often involved in [blank_start]ligand[blank_end] binding, substrate recognition or membrane binding.
Loops [blank_start]do not contribute[blank_end] much to the stability of the tertiary structure and thus can tolerate mutation more readily.
It is often the loop regions of the [blank_start]tertiary[blank_end] structure that are involved in function and their mutatability provides a mechanism for [blank_start]molecular evolution[blank_end] in proteins.- Atertiary structure
- Bsecondary structure
- Cprimary structure
- Dquaternary structure
- Ebeta turns
- Falpha turns
- Gcovalent bonds
- Hhydrogen bonds
- Isecondary structural elements
- Jtertiary structural elements
- Kprimary structural elements
- Lquaternary structural elements
- Msurface
- Ncore
- Oligand
- Pinhibition
- Qcovalent
- Rhydrogen
- Sdo not contribute
- Tcontribute
- Utertiary
- Vsecondary
- Wprimary
- Xquaternary
- Ymolecular evolution
- Zbiosynthesis
- AAphysiological regulation
- ABhorizontal gene transfer
20Here we see porcine elastase with the many polar groups at its surface interacting with water. Match the label with the structure
- Awater
- BBeta sheet
- CHelix
- DLoop
21Here we see porcine elastase with the many polar groups at its surface interacting with water.
This forms a hydration shell around the protein which represents a layer of bound water around the protein. This is seen in few proteins- AVerdadeiro
- BFalso
22Some water molecules can be trapped inside the [blank_start]tertiary[blank_end] structure of proteins in internal cavities or in clefts/interfaces etc. These water molecules are all part of the [blank_start]tertiary structure[blank_end] and may be important for the proteins functional activity.
- Atertiary
- Bsecondary
- Cprimary
- Dquaternary
- Etertiary structure
- Fsecondary structure
- Gprimary structure
- Hquaternary structure
23 Because most of the forces that stabilise tertiary structure are [blank_start]non-covalen[blank_end]t these weak interactions can break and reform readily.
Thus a protein molecule is more flexible than a molecule in which only [blank_start]covalent forces stabilse[blank_end] the structure.
Protein structures continually fluctuate around an equilibrium structure as seen in this molecular dynamics simulation of interactions between two [blank_start]helices[blank_end].
In proteins fluctuations in shape can vary from tiny ones of hundreths of an [blank_start]Angstrom[blank_end] to very large movements of a segment of a structure relative to the rest of the molecule.
This type of flexibility is often key to protein function. Eg. An enzyme might change shape upon binding substrate or a receptor when it binds its [blank_start]agonist[blank_end].
- Anon-covalen
- Bcovalent
- Ccovalent forces stabilse
- Dnon-covalent forces stabilise
- Ecovalent forces disrupt
- Fnon-covalent forces disrupt
- Ghelices
- Hbeta sheets
- IAngstrom
- JArmstrongs
- KKelvin
- LJoules
- MMoles
- NAmstrons
- Oagonist
- Pantagonist
- Qprotagonist
- Racceptor site
24A protein [blank_start]tertiary[blank_end] structure is the most thermodynamically stable structure achievable in aqueous solution. It is primarily driven by the [blank_start]hydrophobic[blank_end] effect and by a series of many [blank_start]non-covalent[blank_end] forces. There are however some addition stabilising factors which aid in the formation of the most appropriate [blank_start]tertiary structure[blank_end].
Many proteins are additionally stabilised by [blank_start]disulphide[blank_end] bonds between segments of secondary structure in the native state. These proteins go through many intermediates on the folding pathway and tend to be more stable [blank_start]than tertiary structures[blank_end] without covalent interactions. Proteins that have [blank_start]disulphide bonds[blank_end] (formed between appropriately positioned cyteine residues), include immunoglobulins, ribonuclease, insulin and pancreatic trypsin inhibitor (shown here).- Atertiary
- Bquaternary
- Cprimary
- Dsecondary
- Ehydrophobic
- Fhydrophilic
- Gnon-covalent
- Hcovalent
- Itertiary structure
- Jprimary structure
- Kquaternary structure
- Lsecondary structure
- Mdisulphide
- Nphosphodiester
- Ohydrogen
- Pthan tertiary structures
- Qthan secondary structure
- Rthan primary structure
- Sthan quaternary structure
- Tdisulphide bonds
- Uphosphodiester bonds
- Vhydrogen bonds
25Determine the bond in trypsin inhibitor
- ADisulphode bond
- BPhosphodiester bond
- CHydrogen bond
- DPeptide bond
26The coordination of a metal ion to several protein side chains is a quite common [blank_start]stabilising[blank_end] factor in proteins. [blank_start]30%[blank_end] of all proteins have metal ions associated with them and the bonding can be very tight or very loose. [blank_start]Water[blank_end] can also be involved in this interaction. The most common stabilising metal ions are [blank_start]calcium[blank_end] and zinc although potassium and sodium are also sometimes found. Stabilising metal ions are distinct from metal ions found in the [blank_start]active site[blank_end] of metalloproteins and they have no chemical function other than providing stability.
- Astabilising
- Binhibition
- Cbinding
- D30%
- E40%
- F50%
- G60%
- HWater
- IDNA
- JSulphate
- KOxygen
- LCofactors
- Mcalcium
- Niron
- Omercury
- Pactive site
- Qbinding site
- Rinhibition site
27Add labels to each protein
- APyridoxal phosphate
- BHaem group
- CPQQ
- DHaem porhyrin ring with iron
28Post translational modification can also change and stabilise tertiary structure This includes
- Aphosphorylation
- Bglycosylation
- Cubiquitination
- Dtransamination
- Econdensation
- Fhydrolysis
29Tertairy structures can exist as various domains and proteins can exhibit stable tertiary structure with distinct catalytic, binding, recognition, control, swithching and other domains.
Proteins can be classified by their domain structure and grouped into genus based on the domains they contain- AVerdadeiro
- BFalso
30Proteins composed of more than one polypeptide chain are said to be oligomeric and exhibit
- Aquaternary structure
- Bprimary structure
- Ctertiary structure
- Dsecondary structure
31Individual subunits are called
- Amonomers
- Bpolymers
- Coligomers
32Quarternary structures are held together by [blank_start]non-covalent[blank_end] forces [blank_start]allowing[blank_end] movements between subunits and at the interfaces between subunits
- Anon-covalent
- Bcovalent
- Callowing
- Dinhibiting
33The subunits of proteins with quarternary structure are not always identical. Eg. If two identical subunits make up the protein it is termed a homodimer, but if two non-identical subunits make up the protein it is a heterodimer.
There are a whole range of oligomeric possibilities.
- AHomodimer a2
- BHeterotetrame a2b2
- CHeterodimer ab
- DHeteropentamer a2bcd
34Quarternary structure depends on the precise fit between the interacting interfaces between subunits. This COMPLEMENTARITY is a function of the PRIMARY sequence of the protein and to some extent to the nature of the SECONDARY structures and final QUATERNARY structure of each subunit.
- AVerdadeiro
- BFalso
35The fit between one subunit and another depends on more than just shape it depends on many factors:
- AHydrogen bond donors are opposite and close enough to acceptor groups.
- BNon-polar groups are a opposite other non-polar groups.
- CPositive charges are opposite negative charges.
36Tight binding between subunits can be achieved if there are a large enough number of weak interactions at the [blank_start]interface.[blank_end]
This is maximised [blank_start]if the interfaces[blank_end] fit closely together.
This principle of complementarity is observed in all binding interactions in proteins whether it is at interfaces or at binding sites for [blank_start]ligands[blank_end] or substrates.
Importantly, complementarity does not rule out flexibility in the protein molecule as we shall see later flexibility is key to the [blank_start]function[blank_end] of many proteins.- Ainterface
- Bbinding site
- Cif the interfaces
- Dif the binding sites
- Eligands
- Finhibitors
- Gfunction
- Hstructure
- Iproperties
37PROTEIN FLEXIBILITY IS IMPORTANT FOR FUNCTION
- AVerdadeiro
- BFalso
38The [blank_start]flexibility[blank_end] of proteins is seen in many different forms of motion. The [blank_start]timescales[blank_end] of these movements dictate the type of events that the motion is associated with. Very fast and small scale motions tend to be associated [blank_start]with catalysis[blank_end], whereas collective mid range spatial and temporal motions are associated with conformational changes [blank_start]upon binding or signalling[blank_end]. Slow and large scale motions in proteins are often associated with [blank_start]binding events[blank_end]. Many of these movements involve the release of bound [blank_start]water molecules[blank_end] and the making/breaking of [blank_start]non-covalent[blank_end] interactions as the protein moves or subunits move relative to one another.
- Aflexibility
- Bcomplementarity
- Ctimescales
- Denergy sources
- Ewith catalysis
- Fwith binding
- Gwith signalling
- Hupon binding or signalling
- Iupon binding or catalysis
- Jupon catalysis or signalling
- Kbinding events
- Lcatalytic events
- Msignalling events
- Nwater molecules
- Oamino acid residues
- Pnon-covalent
- Qcovalent
39Give an example of a substrate induced conformational change in a protein
- ATriosephospahte isomerase
- BAlanine amino transferase
- CPolyamine oxidase
- DMyoglobin
40Triosephospahte isomerase shows specific localised large movements on [blank_start]binding[blank_end] substrate. An [blank_start]eight[blank_end] residue loop (red) is in the open configuration prior to substrate binding and closed down over the bound substrate to exclude [blank_start]solvent[blank_end] (blue) upon [blank_start]binding[blank_end]. You will note that this is a localised [blank_start]shape[blank_end] change and that the main body of the protein does not really change shape. Such triggered conformational changes can be quite [blank_start]large[blank_end] in proteins and it is the unique structure of proteins and the inherant flexibility/instability of the molecules that allows this to happen.
- Abinding
- Bactive
- Ceight
- Dseven
- Esix
- Fsolvent
- Gsolute
- Hbinding
- Iinhibition
- Jshape
- Kbond
- Lcharge
- Mlarge
- Nsmall
Informações
- Descrição
- 1st year Biochemistry and molecular biology Quiz sobre Protein section 3, criado por MrSujg em 25-11-2015.
- Autor
- MrSujg
- Idioma
- English
- Visualizações
- 263
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz