Quiz
70 - 410 QUIZ 1 - VOLUME 3
Crie uma conta grátis para terminar este quiz
Salve seu progresso e veja sua nota final.
Já tem uma conta? Inicie sessão
Perguntas do quiz (50)
1You have a network printer connected to print server. You need to be able to print if print
server goes down.
What should you configure?- Abranch office direct printing
- Bprinter pooling
- Cspooling
- DPrint forwarding
2Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the
Hyper-V server role installed.
On Server1, you create a virtual machine named VM1.
When you try to add a RemoteFX 3D Video Adapter to VM1, you discover that the option is
unavailable as shown in the following exhibit. (Click the Exhibit button.)
You need to add the RemoteFX 3D Video Adapter to VM1.
What should you do first?
- AOn Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet
- BOn Server1, install the Media Foundation feature.
- COn Server1, run the Enable-VMRemoteFxPhysicalVideoAdaptercmdlet.
- DOn Server1, install the Remote Desktop Visualization Host (RD Visualization Host) role
service.
3You have a server named Server1 that runs a full installation of Windows Server 2012 R2.
You need to uninstall the graphical user interface (GUI) on Server1. You must achieve this
goal by using the minimum amount of Administrative effort. What should you do?- AReinstall Windows Server 2012 R2 on the server.
- BFrom Server Manager, uninstall the User Interfaces and Infrastructure feature.
- CFrom Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE
- DFrom Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
4Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
In the perimeter network, you install a new server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. You need to join Server1 to the contoso.com domain. What should you use?
- AThe New-ADComputer cmdlet
- BThe djoin.exe command
- CThe dsadd.exe command
- DThe Add-Computer cmdlet
5You have a server named Server1 that runs Windows Server 2012 R2.
You plan to create an image of Server1.
You need to remove the source files for all server roles that are not installed on Server1.
Which tool should you use?- Aservermanagercmd.exe
- Bimagex.exe
- Cocsetup.exe
- Ddism.exe
6You work as an administrator at Contoso.com. The Contoso.com network consists of an
Active Directory forest that contains a root domain, named Contoso.com, and two child
domains, named us.Contoso.com and uk.Contoso.com. All servers on the Contoso.com
network have Windows Server 2012 R2 installed.
The root domain hosts a domain local distribution group, named ENSUREPASSGroup.
You are preparing to issue ENSUREPASSGroup read-only access to a shared folder
hosted by the us.Contoso.com domain.
You want to make sure that ENSUREPASSGroup is able to access the shared folder in the us.Contoso.com domain.
Which of the following actions should you take?- AYou should consider re-configuring ENSUREPASSGroup as a universal Admins group.
- BYou should consider re-configuring ENSUREPASSGroup as a universal security group.
- CYou should consider re-configuring ENSUREPASSGroup as a global administrators
group. - DYou should consider re-configuring ENSUREPASSGroup as a local administrators
group.
7You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1. You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.)
You need to configure bandwidth management for VM1.
Which three actions should you perform in sequence? (To answer, move the appropriate
three actions from the list of actions to the answer area and arrange them in the correct
order.) 3 answers
- AShut down VM1
- BAdd a network Adapter to VM1
- CConfigure tthe properties of the synthetic network adapter
- DEnable Hyper-V resource metering
- EConfigure the properties of the synthetic network adapter
- F
8You work as a senior administrator at Contoso.com. The Contoso.com network consists of
a single domain named Contoso.com. All servers on the Contoso.com network have
Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing
the new VHD format called VHDX.
Which of the following is TRUE with regards to VHDX? (Choose all that apply.)- AIt supports virtual hard disk storage capacity of up to 64 GB.
- BIt supports virtual hard disk storage capacity of up to 64 TB.
- CIt does not provide protection against data corruption during power failures.
- DIt has the ability to store custom metadata about the file that the user might want to
record.
9Your network contains one Active Directory domain named contoso.com. The domain
contains 10 domain controllers and a read-only domain controller (RODC) named
RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10
before you remove Active Directory from DC1.
Which tool should you use?- Athe ntdsutil command
- Bthe Set-ADDomain cmdlet
- Cthe Install-ADDSDomain cmdlet
- Dthe dsadd command
- Ethe dsamain command
- Fthe dsmgmt command
- Gthe net user command
- Hthe Set-ADForest cmdlet
10Your network contains two Active Directory forests named contoso.com and adatum.com.
A two-way forest trust exists between the forests.
You have custom starter Group Policy objects (GPOs) defined in contoso.com.
You need to ensure that the same set of custom starter GPOs are available in
adatum.com.
In the table below, identify which action must be performed for the starter GPOs container
in each forest. Make only one selection in two of the rows. Each correct selection is worth
one point.- Aquestion
- BAnswer
- Aquestion
11You have a file server named Server1 that runs Windows Server 2012 R2. Server1
contains a folder named Folder1.
You share Folder1 as Share1 by using Advanced Sharing. Access-based enumeration is
enabled.
Share1 contains an application named Appl.exe.
You configure the NTFS permissions on Folder1 as shown in the following table.
The members of Group2 report that they cannot make changes to the files in Share1. The
members of Group1 and Group2 run Appl.exe successfully.
You need to ensure that the members of Group2 can edit the files in Share1.
What should you do?
- AReplace the NTFS permissions on all of the child objects.
- BEdit the Share permissions.
- CEdit the NTFS permissions
- DDisable access-based enumeration
12You have an Active Directory domain named contoso.com. You have a domain controller
named Server1 that is configured as a DNS server. Server1 hosts a standard primary zone
for contoso.com. The DNS configuration of Server1 is shown in the exhibit.
You discover that stale resource records are not automatically removed from the
contoso.com zone.
You need to ensure that the stale resource records are automatically removed from the
contoso.com zone.
What should you do?- ASet the scavenging period of Server1 to 0 days.
- BModify the Server Aging/Scavenging properties.
- CConfigure the aging properties for the contoso.com zone.
- DConvert the contoso.com zone to an Active Directory-integrated zone.
13Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012 R2. The domain contains a member server named Server1. Server1
has the File Server server role installed.
On Server1, you create a share named Documents. The Documents share will contain the
files and folders of all users.
You need to ensure that when the users connect to Documents, they only see the files to
which they have access.
What should you do?- AEnable access-based enumeration
- BConfigure Dynamic Access Control.
- CModify the Share permissions.
- DModify the NTFS permissions.
14Your network contains an Active Directory forest. The forest contains two domains named
contoso.com and corp.contoso.com. The forest contains four domain controllers. The
domain controllers are configured as shown in the following table.
All domain controllers are DNS servers. In the corp.contoso.com domain, you plan to
deploy a new domain controller named DC5.
You need to identify which domain controller must be online to ensure that DC5 can be
promoted successfully to a domain controller.
Which domain controller should you identify?
- ADC1
- BDC2
- CDC3
- DDC4
15You work as a senior administrator at Contoso.com. The Contoso.com network consists of
a single domain named Contoso.com. All servers on the Contoso.com network have
Windows Server 2012 installed, and all workstations have Windows 8 installed.
You are running a training exercise for junior administrators. You are currently discussing
the Always Offline Mode.
Which of the following is TRUE with regards to the Always Offline Mode? (Choose all that
apply.)- AIt allows for swifter access to cached files and redirected folders.
- BTo enable Always Offline Mode, you have to satisfy the forest and domain functionallevel
requirements, as well as schema requirements - CIt allows for lower bandwidth usage due to users are always working offline.
- DTo enable Always Offline Mode, you must have workstations running Windows 7 or
Windows Server 2008 R2.
16You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the
File and Storage Services server role installed.
You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
Storage for an application named Application1 must be provided. Application1
requires 20 GB and will require a maximum of 800 GB in three years.
Storage for an application named Application2 must be provided. Application2
requires 20 GB and will require a maximum of 900 GB in three years.
The solution must provide the ability to dynamically add storage without requiring
configuration changes to the applications.
The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)- AFrom File and Storage Services, create virtual disks by using fixed provisioning.
- BFrom File and Storage Services, create virtual disks by using thin provisioning.
- CFrom File and Storage Services, create a storage pool that uses all four disks.
- DFrom Disk Management, create a new RAID-5 volume that uses all four disks.
- EFrom Disk Management, create two new mirror volumes that use two disks each.
17You work as an administrator at Contoso.com. The Contoso.com network consists of a
single domain named Contoso.com. All servers in the Contoso.com domain, including
domain controllers, have Windows Server 2012 R2 installed.
You have just executed the Uninstall-WindowsFeature Server-Gui-Shell Contoso.com
server, named ENSUREPASS-SR13.
Which of the following is the reason for doing this?- ATo only remove Windows Explorer from ENSUREPASS-SR13.
- BTo only remove the Windows Internet Explorer from ENSUREPASS-SR13.
- CTo only remove the components and files related to Windows Explorer from
ENSUREPASSSR13. - DTo remove Windows Explorer, Windows Internet Explorer, and all associated
components and files from ENSUREPASS-SR13.
18Your network contains an Active Directory domain named contoso.com.
You have a starter Group Policy object (GPO) named GPO1 that contains more than 100 settings.
You need to create a new starter GPO based on the settings in GPO1.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?- ARun the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet.
- BCreate a new starter GPO and manually configure the policy settings of the starter GPO.
- CRight-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the
new GPO, and then click Restore from Backup. - DRight-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste.
19A company’s server deployment team needs to install fourteen Windows Server 2012 R2 to
handle the expected increase in holiday traffic. The team would like the option of switching
the servers between Server Core and Full GUI servers and do not want to be locked in to
their first choice.
The server team would like four of the servers to include the Windows 8 Shell.
Which installation option is required for these servers?- AServer Core
- BDesktop Experience
- CServer with a GUI
- DMinimal Server Interface
20You have a Hyper-V host named server1 that runs windows server 2012 R2.server1 host
50 virtual machines that run windows server 2012 R2
You enable and configure enhanced session mode on Server1.
You need to identify a new functionality available for the virtual machines hosted on
server1.
What should you identify?- ASmart card authentication using virtual machine connections
- BRedirection of RemoteFX USB drivers by using remote desktop connections
- CRedirection of RemoteFX USB drivers using virtual machine connections
- Dsmart card authentication using the remote desktop client.
21Your network contains an Active Directory domain named contoso.com. The domain
contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has
the File and Storage Services server role installed.
On Server1, you create a share named Documents.
You need to ensure that users can recover files that they accidently delete from
Documents.
What should you do?- AEnable shadow copies by using Computer Management.
- BCreate a storage pool that contains a two-way mirrored volume by using Server
- CModify the Startup type of the Volume Shadow Copy Service (VSS) by using the
Services console. - DCreate a recovery partition by using Windows Assessment and Deployment Kit
(Windows ADK).
22A company’s server virtualization team needs to provision a series of Hyper-V workloads to
use existing network storage arrays. The team has chosen to use Fibre Channel ports
within the guest operating systems.
Which of the following Windows Server versions can be used as guest operating systems
when using Hyper-V Fibre Channel ports?- A2003 R2
- B2008
- C2003
- D2012
23Your network contains an Active Directory domain named contoso.com. The domain
contains a user account named User1 that resides in an organizational unit (OU) named
OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to publish
several applications to a user named User1.
In the Users container, you create a new user named User2.
You need to ensure that the same applications are published to User2.
What should you do?- AModify the settings in GPO1.
- BMove User2 to OU1
- CLink a WMI filter to GPO1.
- DModify the security of GPO1.
24Your network contains two Active Directory forests named contoso.com and adatum.com.
All servers run Windows Server 2012 R2.
A one-way external trust exists between contoso.com and adatum.com.
Adatum.com contains a universal group named Group1. You need to prevent Group1 from
being used to provide access to the resources in contoso.com.
What should you do?- AModify the Managed By settings of Group1.
- BModify the Allowed to Authenticate permissions in adatum.com.
- CChange the type of Group1 to distribution.
- DModify the name of Group1.
25Your network contains an Active Directory domain named contoso.com. The domain
contains an application server named Server1. Server1 runs Windows Server 2012 R2.
You have a client application named App1 that communicates to Server1 by using dynamic
TCP ports.
On Server1, a technician runs the following command: New-NetFirewallRule -DisplayName
AllowDynamic - Direction Outbound -LocalPort 1024- 65535 -Protocol TCP.
Users report that they can no longer connect to Server1 by using App1.
You need to ensure that App1 can connect to Server1.
What should you run on Server1?- ASet-NetFirewallRule -DisplayName AllowDynamic -Action Allow
- Bnetsh advfirewall firewall set rule name=allowdynamic new action = allow
- CSet-NetFirewallRule -DisplayName AllowDynamic -Direction Inbound
- Dnetsh advfirewall firewall add rule name=allowdynamic action=allow
26You work as an administrator at Contoso.com. The Contoso.com network consists of a
single domain named Contoso.com. All servers on the Contoso.com network have
Windows Server 2008 R2 installed.
Most of the Contoso.com servers have 64 – bit CPU’s installed, while the rest have 32 – bit
CPU’s installed. You are informed that Contoso.com wants to deploy Windows Server 2012
R2 on all their servers.
You need to make recommendations to ensure that this is possible.
Which of the following would you recommend?- AYou should inform Contoso.com that the deployment can proceed without any changes.
- BYou should inform Contoso.com that the servers with 32 bit CPU’s must be upgraded to include 64 bit CPU’s for the deployment to proceed.
- CYou should inform Contoso.com that the servers with 64 bit CPU’s must be upgraded to
include 32 bit CPU’s for the deployment to proceed. - DYou should inform Contoso.com that the deployment is not in any way possible.
27You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Hyper-V server role installed.
An iSCSI SAN is available on the network.
Server1 hosts four virtual machines named VM1, VM2, VM3, VM4.
You create a LUN on the SAN.
You need to provide VM1 with access to the LUN. The solution must prevent other virtual
machines from accessing the LUN.
What should you configure?- AA fixed-size VHDX
- BA dynamically expanding VHDX
- CA fixed-size VHD
- DA pass-through disk
- EA dynamically expanding VHD
28You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit.
(Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without
intervention. The solution must prevent data loss.
Which settings should you modify?
- ABIOS
- BAutomatic Start Action
- CAutomatic Stop Action
- DIntegration Services
29Your network contains an Active Directory domain named adatum.com. The domain
contains a member server named Server1 and a domain controller named DC2. All servers
run Windows Server 2012 R2. On DC2, you open Server Manager and you add Server1 as
another server to manage. From Server Manager on DC2, you right-click Server1 as shown in the exhibit. You need to ensure that when you right-click Server1, you see the option to
run the DHCP console.
What should you do?
- AOn Server1, install the Feature Administration Tools.
- BIn the domain, add DC1 to the DHCP Administrators group.
- COn DC2 and Server1, run winrm quickconfig.
- DOn DC2, install the Role Administration Tools.
30You have a server named Server2 that runs Windows Server 2012 R2. You open Server
Manager on Server2 as shown in the exhibit. (Click the Exhibit button.) The Everyone
group has read share permission and read NTFS permission to Sources.
You need to ensure that when users browse the network, the Sources share is not visible.
What should you do?
- AFrom the properties of the Sources folder, remove the Sources share, and then share
the Sources folder as
Sources$ - BFrom the properties of the Sources folder, deny the List Folder Contents permission for
the Everyone group - CFrom the properties of the Sources share, configure access-based enumeration
- DFrom the properties of the Sources folder, configure the hidden attribute
- AFrom the properties of the Sources folder, remove the Sources share, and then share
31You work as an administrator at Contoso.com. The Contoso.com network consists of a
single domain named Contoso.com. All servers on the Contoso.com network have
Windows Server 2008 R2 installed. Some of Contoso.com’s workstations have Windows 7
installed, while the rest have Windows 8 installed.
After installing a new Windows Server 2012 computer in the Contoso.com domain, you
configure it to run the File and Storage Services server role. You are instructed to create a
shared folder on the new server, and configure the use of Previous Versions for restoring
files located in the shared folder.
Which of the following actions should you take?- AYou should consider configuring the Shadow Copies settings on the new server.
- BYou should consider configuring the Snapshot settings on the new server.
- CYou should consider configuring the Background Copy settings on the new server
- DYou should consider configuring the Permission settings on the new server
32Your network contains an Active Directory forest named adatum.com. The forest contains a
child domain named asia.adatum.com. The asia.adatum.com child domain contains a
server named DHCP1 that runs Windows Server 2012 R2.
You install the DHCP Server server role on DHCP1.
You have access to the administrative accounts shown in the following table.
You need to authorize DHCP1.
Which user account should you use?
- AAdmin1
- BAdmin2
- CAdmin3
- DAdmin4
33Your network contains an Active Directory domain named contoso.com.
All user accounts in the marketing department reside in an organizational unit (OU) named
OU1.
You have a Group Policy object (GPO) named GPO1. GPO1 contains Folder Redirection
settings. GPO1 has default permissions.
You discover that the Folder Redirection settings are not applied to the users in the
marketing department.
You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the Folder Redirection settings in GPO1 apply to the marketing
users.
What should you do?
- AModify the Delegation settings of GPO1.
- BEnable the link of GPO1
- CEnforce GPO1
- DModify the link order of GPO1.
34Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named DC1 that has the DNS Server server role installed.
DC1 hosts an Active Directory-integrated zone for the domain. The domain contains a
member server named Server1.
You install the DNS Server server role on Server1.
You need to ensure that Server1 can respond authoritatively to queries for the existing
contoso.com namespace.
Which cmdlets should you run on each server? (To answer, drag the appropriate cmdlets
to the correct servers. Each cmdlet may be used once, more than once, or not at all. You
may need to drag the split bar between panes or scroll to view content.)
- Aadd-DNS server Forwarder
- Badd-DNS server Primary Zone
- Cadd-DNS server Secondary Zone
- Dadd-DNS server Trust Anchor
- Eset -DNS server DS Setting
- Fset-DNS server Primary Zone
- Gset-DNS server Secondary Zone
- Hset-DNS server setting
35You work as an administrator at Contoso.com. The Contoso.com network consists of a
single domain named Contoso.com. All servers in the Contoso.com domain, including
domain controllers, have Windows Server 2012 installed.
You have been instructed to modify an Active Directory computer object.
Which of the following actions should you take?- AYou should consider making use of the Get-ADComputer Windows PowerShell cmdlet.
- BYou should consider making use of the Set-ADComputer Windows PowerShell cmdlet
- CYou should consider making use of the New-ADComputer Windows PowerShell cmdlet
- DYou should consider making use of the Get-ADComputerServiceAccount Windows
PowerShell cmdlet
36You have a Hyper-V host named Hyper1 that runs Windows Server 2012 R2.
Hyper1 hosts several virtual machines that run Windows 8.1.
Several developers connect to the virtual machines by using the Virtual Machine Connection tool.
You need to ensure that the devlopers can print to their local printers from within virtual
machine sessions.
What should you configure?- Aa virtual switch on Hyper1
- BRemote Desktop Services (RDS) on Hyper1
- Ca virtual network adapter on the virtual machines
- Denhanced session mode on Hyper1
37Your network contains an Active Directory forest that contains two domains. The forest
contains five domain controllers. The domain controllers are configured as shown in the
following table.
You need to configure DC5 as a global catalog server. Which tool should you use?
- AActive Directory Domains and Trusts
- BActive Directory Users and Computers
- CActive Directory Administrative Center
- DActive Directory Sites and Services
38You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the
File and Storage Services server role installed. You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
Storage for an application named Application1 must be provided. Application1
requires 20 GB and will require a maximum of 800 GB in three years.
Storage for an application named Application2 must be provided. Application2
requires 20 GB and will require a maximum of 900 GB in three years.
The solution must provide the ability to dynamically add storage without requiring
configuration changes to the applications.
The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)- AFrom File and Storage Services, create virtual disks by using fixed provisioning.
- BFrom File and Storage Services, create a storage pool that uses all four disks.
- CFrom Disk Management, create two new mirror volumes that use two disks each.
- DFrom Disk Management, create a new RAID-5 volume that uses all four disks
- EFrom File and Storage Services, create virtual disks by using thin provisioning
39Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named
RODC01.
You have a domain controller named DC5 that has the Server Graphical Shell disabled.
You create an organizational unit (OU) named OU1.
From DC5, you need to create 50 new user accounts in OU1.
Which tool should you use?- Athe ntdsutil command
- Bthe Set-ADDomain cmdlet
- Cthe Install-ADDSDomain cmdlet
- Dthe dsadd command
- Ethe dsamain command
- Fthe dsmgmt command
- Gthe net user command
- Hthe Set-ADForest cmdlet
40Your network contains an Active Directory forest named contoso.com. The forest contains
a child domain named corp.contoso.com.
The network has Microsoft Exchange Server 2010 deployed.
You need to create a mail-enabled distribution group.
Which type of group should you create?- AGlobal
- BLocal
- CDomain local
- DUniversal
41Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012 R2.
When a domain user named User3 attempts to log on to a client computer named Client10,
User3 receives the message shown in the following exhibit. (Click the Exhibit button.)
You need to ensure that User3 can log on to Client10.
What should you do?- AFrom Active Directory Users and Computers, configure the Logon Workstations setting of User3.
- BOn Client10, modify the Allow log on locally User Rights Assignment.
- CFrom Active Directory Users and Computers, configure the Personal Virtual Desktop
property of User3. - DOn Client10, modify the Deny log on locally User Rights Assignment
42Server1 runs Windows Server 2012 R2 and is installed as an FTP server. Client uses App1
to connect to Server1 for FTP. App1 uses TCP port 21 for control and a dynamic port for
data. You have allowed port 21 in firewall. What should you do next in order to allow clients
to use App1 to connect to server1 using ftp.- AAt Server1 allow firewall rule of outbound
- BAt Server1 allow firewall rule of inbound
- CNetsh advfirewall domainprofile state off
- DNetsh advfirewall set global StatefulFtp enable
43Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2 and is
configured as the only domain controller.
You need to retrieve a list of all the user accounts. The list must include the last time each
user was authenticated successfully.
Which Windows PowerShell command should you run?
To answer, drag the appropriate cmdlet or property to the correct locations to complete the
PowerShell command in the answer area. Each cmdlet or property may be used once,
more than once, or not at all. You may need to drag the split bar between panes or scroll to
view content.
- AGet-AD Computer
- BGet-AD User
- Cset-AD Computer
- Dset-AD USER
- ECredentials
- FLast Logon Date
- GLogon Hours
44You work as an administrator at Contoso.com. The Contoso.com network consists of a
single domain named Contoso.com. All servers in the Contoso.com domain, including
domain controllers, have Windows Server 2012 installed.
You have been instructed to modify the name of the local Administrator account on all
Contoso.com workstations. You want to achieve this using as little administrative effort as
possible.
Which of the following actions should you take?- AYou should consider configuring the Security Options settings via the Group Policy
Management Console (GPMC). - BYou should consider navigating to Local Users and Groups via Computer
- CYou should consider configuring the replication settings.
- DYou should consider navigating to Local Users and Groups via Computer Management
on each workstation.
- AYou should consider configuring the Security Options settings via the Group Policy
45You have two servers named Server1 and Server2. Both servers run Windows Server 2012
R2. The servers are configured as shown in the following table.
SERVER NAME WINDOWS FIREWALL IP ADDRESS
Server 1 Enabled 10.01.1.4
Server 2 Disabled 192.168.1.10
The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit
button.)
From Server1, you attempt to ping Server2, but you receive an error message as shown in
the Error exhibit. (Click the Exhibit button.)
You need to ensure that you can successfully ping Server2 from Server1.
What should you do on Server1?
- ADisable Windows Firewall
- BModify the subnet mask.
- CModify the DNS settings.
- DModify the default gateway settings.
46Your network contains an active directory domain named contoso.com. The domain
consists 20
member Servers and 5 domain controllers. All servers run Windows Server 2012 R2. The
domain contains 500 client computers.
You plan to deploy a domain controller for contoso.com in Microsoft Azure.
You need to prepare the conversation for planned deployment. The solution should ensure
that the domain controller hosted in Azure always have the same IP address.
Witch two actions should you perform? Each correct answer is a part of the solution.- AFrom an Azure virtual machine run the Set-AzureStaticVNetIP cmdlet
- BDeploy a Side by side virtual private network (VPN)
- CFrom Azure virtual machine run the Set –NetIPAuthentication cmdlet
- DFrom an domain controller run the Set-NetIPAdresses cmdlet
- EFrom an domain controller run adprep.exe
47Your network contains two Active Directory forests named adatum.com and contoso.com.
Both forests contain multiple domains. A two-way trust exists between the forests.
The contoso.com domain contains a domain local security group named Group1. Group1
contains Contoso\user1 and adatum\user1.
You need to ensure that Group1 can only contain users from the contoso.com domain.
Which three actions should you perform?
To answer, move three actions from the list of actions to the answer area and arrange them
in the correct order.
- ARemove adatum\user1 from Group 1
- BRemove contoso\user1 from Group 1
- CConvert Group 1 to a global group
- DConvert Group 1 to a distribution group
- EConvert Group 1 to a universal group
48You run a Windows 2012 R2 Hyper-V Role Server, you need to shrink the size of files.vhd.
Which PowerShell cmdlet option you should run first?- ADismount-VHD
- BMount-VHD
- CResize-VHD
- DConvert-VHD
49Your network contains an Active Directory domain named contoso.com. All domain
controllers run Windows Server 2008 R2. One of the domain controllers is named DC1.
The network contains a member server named Server1 that runs Windows Server 2012
R2.
You need to promote Server1 to a domain controller by using install from media (IFM).
What should you do first?- ACreate a system state backup of DC1.
- BCreate IFM media on DC1.
- CUpgrade DC1 to Windows Server 2012 R2.
- DRun the Active Directory Domain Services Configuration Wizard on Server1.
- ERun the Active Directory Domain Services Installation Wizard on DC1.
50Your network contains an Active Directory domain named contoso.com. All user accounts
are in an organizational unit (OU) named Employees.
You create a Group Policy object (GPO) named GP1. You link GP1 to the Employees OU.
You need to ensure that GP1 does not apply to the members of a group named Managers.
What should you configure?- AThe Security settings of Employees
- BThe WMI filter for GP1
- CThe Block Inheritance option for Employees
- DThe Security settings of GP1
Informações
- Descrição
- 70-410 70-410 Quiz sobre 70 - 410 QUIZ 1 - VOLUME 3, criado por saheed Tijani em 24-01-2016.
- Autor
- saheed Tijani
- Idioma
- English
- Visualizações
- 314
- Etiquetas
- Avaliação
- Ainda sem avaliações Avalie este quiz