Quiz
Mechanical Tools
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (46)
1A Tool used to check the squareness of framing (i.e., 90-degree or right angles.) There are metric or english-system gradations for measuring as well?
- Ascrew pitch guage
- Bcarpenters steel square
- Coutside calipers
- Dprotracter
2Tool primarily used to cut fine joints in wood, as in a tenon, lap, or dovetail. It can be used in conjunction with a miter box to cut accurate 45-or 90-degree angles?
- ABack Saw (tenon saw)
- BHacksaw
- C sheet metal saw
- DSaber saw
3this tool is an all purpose tool that can measure and serve as a try square, miter square, and level. Measuring capacity of in metric or english gradations is 12 inches?
- Aprotractor
- Bcarpenters steel square
- Cdildo
- Dcombination square
4A Tool used to check the squareness of framing (i.e., 90-degree or right angles.) There are metric or english-system gradations for measuring as well?
- Ascrew pitch guage
- Bcarpenters steel square
- Coutside calipers
- Dprotracter
5This tool is used as an instrument to draw or plot angles (0 to 180 degrees on a surface)?
- AProtractor
- BBevel
- Cplumb bob
- Dlevel
6What is a TRY SQUARE used for?
- Aused to determine if a workpiece is level
- Bused to determine the degree of right angles
- Cused to determine if a work place is square (i.e., has 90 degree right angle)
- Dused to mark or verify angles on a work plane
7What is a plumb bob used for?
- Adetermine a true horizontal line
- Bdetermining if a line is straight
- Cused for plumbing toilets
- Dused to determine a true vertical line
8Tool used to cut wood planks, sheets, or panels to desired size ?
- ABack saw
- BHandsaw
- CHacksaw
- DCoping saw
9used to determine true horizontal line or accurate level of surface?
- ALevel
- BInside calipers
- COutside calipers
- Dvernier caliper
10Used to cut holes in a panel. This saw is not restricted to an edge of a workpiece, like the coping saw, because of the lack of a frame?
- ACompass knife
- Bjigsaw
- CCompass saw
- DTriangular saw
11Tool is used to mark or verify angles on a workplace. Normally a Protractor is used to serve as a point of reference?
- ALevel
- Bcompass square
- Ct-bevel
- Dcombo triangler
12Tool is a saw that is used in making curved cuts in wood or plastic?
- Acompass saw
- BCoping Saw
- CExternal saw
- DT-rex saw
13what is another name for a Compass Saw?
- Akey saw
- Btenon saw
- CKeyhole saw
- DPanel saw
14Saw used to cut metal sheets, pipes, plastics etc.?
- ACircular saw
- BCross cut saw
- CPortable saw
- DHack saw
15Tool used to cut lumbar or plywood to desired size?
- Aportable circular saw
- BCross cut saw
- CLumbar saw
- DChainsaw
16WHAT Saw blades can be used with a portable circular saw?
- Across cut, rip cut, combination, friction disk, carbide cartridge, friction blade
- Bcross blade, rip cut, combination, friction disk, friction blade , vertical blade, horizontal blade
- Ccross cut, rip cut, combination, carbide tipped, metal cutting, friction blade, abrasive disk
- Dall of the above can be used
17A tool used in much the same way as a hand-or compass saw to cut wood, plastic, or thin-guage metal depending on blade selection?
- AReciprocating saw
- Bsaber saw
- Cfriction blade
- Dhandsaw
18tool used to fell timber and cut logs into desired lengths?
- AJigsaw
- BChainlink saw
- CChain saw
- D Circular Saw
19whats another name for a Saber Saw?
- AJigglesaw
- BJinksaw
- CPowered amp saw
- DPowered jigsaw
20Tool is used for general carpentry, it can pull and extract nails?
- AHammer
- BOpen ended wrench
- CClaw hammer
- DBall pen Hammer
21used in metalworking such as rivet setting or metal forging?
- ABall pen Handling
- BBall pen sledge hammer
- CBall pen Hammer
- Dmallet
22what is another name for a ball peen hammer
- Agun hammer
- Bmachine gun hammer
- Cball pin hammer
- Dengineers hammer
23a tool used for heavy duty work involving masonry drills or chisels.
- Aclub hammer
- Bchisel hammer
- Csoft handed hammer
- Dsledge hammer
24How much does the head weigh up to on a club hammer?
- A4lbs
- B10LBS
- C6LBS
- D8lbs
25Tool used for heavy duty work such as breaking concrete, driving posts, etc.?
- AMallett
- BSludge hammer
- CSledgehammer
- DPulveriser
26whats another name for a soft- faced mallet?
- Alumbar mallet
- Bengineers mallet
- Cabsorbing mallet
- Drubber mallet
27How much can the head weight on a sledge hammer?
- A2 to 20lbs
- B4 to 16lbs
- C6 to 20lbs
- D10 to 30lbs
28used to cut curves in a various materials depending on blade selection?
- AChainsaw
- BBack saw
- CSaber saw
- DFriction Blade
29tool used to drive materials without causing any damage to the tools involved or to the surface of a workpiece ?
- Amallet
- BHammer
- Csoft faced mallet
- Dhard faced mallet
30whats another name for a club hammer?
- Ahand held hammer
- BHand drilling hammer
- Chand driving mallet
- Dengineers hammer
31 tool used to drive slotted head screws?
- AHacksaw
- BMicrometer slot screw
- Ctorx screwdriver
- Dconventional straight shank screwdriver
32used to drive phillip head screws. its design enhances ones grip compared to that acheived with conventional slotted-or flared tip screwdrivers?
- APhillips screwdriver
- Btorx screwdriver
- Cportable screwdriver
- Doffset screwdriver
33used when a fair amount of torque is required on a screw. This design enhances your grip still more than a phillips or flare-tipped screwdriver?
- Aphillips screwdriver
- BPeen screwdriver
- CTork screwdriver
- Dtorx screwdriver
34tool used to drive screws where space is fairly restricted?
- Atorx screwdriver
- Bstubble screwdriver
- Cstubby screwdriver
- Doff set screw driver
35tool used in driving or loosening relatively small screws such as those found in eyeglass hinges,clocks,wristwatches, etc.
- Aoffset screwdriver
- Bjewelers screwdriver
- Cshank screw
- Dflat head screwdriver
36used when standard screwdrivers cannot fit. Additionally, these screwdrivers enable the user to place a fair amount of torque on the screw being driving?
- Aoffset screwdriver
- Bonset screwdriver
- Ctorque screwdriver
- Dlittle screwdriver
37Used to tighten or loosen nuts and bolts from the side?
- Aopen-ended wrench
- Bbox wrench
- Ccrescent wrench
- Dmonkey wrench
38if a nut is obstructed by something directly overhead what is the best tool to use to loosen it?
- Abox wrenh
- Bscrewdriver
- Copen-ended wrench
- Dtorx screwdriver
39tool used to tighten or loosen nuts and bolts. A closed wrench of this design allows for significantly more torque to be applied without the fear of the wrench slipping and stripping the nut. Its drawback is that it takes more time to use this wrench than the open variety?
- Aoffset wrench
- Bbox wrench
- Ccrescent wrench
- Dhexagonal wrench
40tool designed to be able to reach a nut or bolt in a recessed area over an obstruction. These wrenches also have the advantage of allowing hand clearence when tightening a bolt or nut flush with a work surface.
- Acrescent wrench
- Boffset wrench
- Ctorx wrench
- Dmonkeywrench
41An adjustable wrench that can be used to tighten or loosen nuts and bolts of varied sizes?
- Aadjustable wrench
- Boffset wrench
- Ccrescent wrench
- Dmonkey wrench
42An adjustable wrench that can be used to tighten or loosen nuts and bolts of varied sizes. This wrench has a heavier design than a crescent wrench?
- Aonset wrench
- Bheavy duty wrench
- Cmonkey wrench
- Dspanner wrench
43what is another name for a monkey wrench?
- Acrescent wrench
- Ballen wrench
- Ctap wrench
- Dscrew wrench
44an adjustable wrench used to grip round objects like metal pipes or steel rods?
- Asamson wrench
- Btorque wrench
- Cstilson wrench
- Dsocket wrench
45used for gripping and turning pipes without harming the exterior finish?
- Asocket wrench
- Bplastic strap wrench
- Cstrap wrench
- Dspanner wrench
46one of the most common wrenches used today. Nuts and bolts can be quickly tightened or loosened with the ratchet handle thus sparing the need to readjust for another grip as with most other wrenches?
- Atorque wrench
- Bspanner wrench
- Csocket wrench
- Dallen wrench
Information
- Description
- Quiz on Mechanical Tools, created by troydink18 on 03/08/2014.
- Author
- troydink18
- Language
- English
- Views
- 37
- Rating
- No ratings yet Rate this quiz