Quiz
1 - Building Controls
This quiz has question types that open in the usual player.
Questions in this quiz (12)
1A control system receives an [blank_start]input[blank_end] and [blank_start]transmits[blank_end] an [blank_start]output[blank_end].
- Ainput
- Boutput
- Ctransmits
2There are two types of control loop:
- [blank_start]Basic[blank_end] [blank_start]manual[blank_end] - human adjustment
- [blank_start]Single[blank_end] [blank_start]automatic[blank_end] - automatic adjustment- ABasic
- Bmanual
- CSingle
- Dautomatic
3Control systems can be classified by:
- [blank_start]Control[blank_end] [blank_start]theory[blank_end] (linear vs non-linear)
- [blank_start]Mathematical[blank_end] [blank_start]techniques[blank_end] (frequency domain vs time domain)
- [blank_start]Signal[blank_end] [blank_start]transmission[blank_end] (feed-forward/open loop vs feedback/closed loop)
- [blank_start]Number[blank_end] of I/O (SIOS vs MIMO)- AControl
- Btheory
- CMathematical
- Dtechniques
- ESignal
- Ftransmission
- GNumber
4Four types of components of block diagram:
- [blank_start]Signals[blank_end]
- [blank_start]System[blank_end]
- [blank_start]Summing[blank_end] [blank_start]Junction[blank_end]
- [blank_start]Pickoff[blank_end] [blank_start]Point[blank_end]- ASignals
- BSystem
- CSumming
- DJunction
- EPickoff
- FPoint
5Main elements of a closed loop system:
- [blank_start]Measure[blank_end] (Sensor)
- [blank_start]Compare[blank_end] (Controller)
- [blank_start]Compare[blank_end] (Actuators)
- [blank_start]Correct[blank_end] (System)- AMeasure
- BCompare
- CCompare
- DCorrect
6[blank_start]Two[blank_end] [blank_start]position[blank_end] control - FCE can either be on or off. Leads to continuous on and off switching - [blank_start]overshoot[blank_end] and [blank_start]undershoot[blank_end].
- ATwo
- Bposition
- Covershoot
- Dundershoot
7Modulating Control Modes:
- [blank_start]Proportional[blank_end] - Output [blank_start]proportional[blank_end] to input ([blank_start]simple[blank_end], direct relationship, larger error)
- [blank_start]Integral[blank_end] - Proportion to the [blank_start]deviation[blank_end] from the desired value ([blank_start]close[blank_end] control, removes offset, takes time, not for fast response)
- [blank_start]Derivative[blank_end] - Proportional to the [blank_start]rate[blank_end] of [blank_start]change[blank_end] of the control variable ([blank_start]fast[blank_end] response, no long term)- AProportional
- BIntegral
- CDerivative
- Dproportional
- Edeviation
- Frate
- Gchange
- Hfast
- Iclose
- Jsimple
8Space temp. - [blank_start]P[blank_end]
Mixed air temp. - [blank_start]PI[blank_end]
Coil discharge temp. - [blank_start]PI[blank_end]
Chiller discharge temp. - [blank_start]PI[blank_end]
Air flow. - [blank_start]PI[blank_end]
Fan static pressure - [blank_start]PI[blank_end]
Humidity - [blank_start]P[blank_end]
Dewpoint - [blank_start]P[blank_end]- AP
- BPI
- CPI
- DPI
- EPI
- FPI
- GP
- HP
9Valve authority = P1/(P1+P2)
0 - 0.25: [blank_start]unstable[blank_end] to [blank_start]fair[blank_end]
0.25 - 0.5: [blank_start]fair[blank_end] to [blank_start]good[blank_end]
0.5 - 1: good- Aunstable
- Bfair
- Cfair
- Dgood
10Valve type:
- [blank_start]Linear[blank_end]
- [blank_start]Equal[blank_end] percentage
- [blank_start]Quick[blank_end] opening
- [blank_start]Characterised[blank_end] [blank_start]V[blank_end] port
- [blank_start]Ball[blank_end] valve- ALinear
- BEqual
- CQuick
- DCharacterised
- EV
- FBall
11Types of damper control:
- [blank_start]Opposed[blank_end]
- [blank_start]Parallel[blank_end]
- [blank_start]Butterfly[blank_end]
- [blank_start]Linear[blank_end]- AOpposed
- BParallel
- CButterfly
- DLinear
12Valve or damper can act as FCE for controlling air distribution:
- [blank_start]Fire[blank_end] damper
- [blank_start]Smoke[blank_end] damper
- [blank_start]Volume[blank_end] damper- AFire
- BSmoke
- CVolume
Information
- Description
- Controls - Building Services
- Author
- Jamie Hart
- Language
- English
- Views
- 3
- Rating
- No ratings yet Rate this quiz