Windows Review - Part C

Question 1

You have two portable computers named Computer1 and Computer2 that run Windows 7. You configure Computer1 to connect to a wireless network named Network1. You need to configure Computer2 to connect to Network1 by using the same settings as Computer1. What should you do on Computer1?

Accepted Answer

From the wireless network properties of Network1, copy the network profile to a USB flash drive.

Answer

At the command prompt, run Wecutil.exe Ces Cgr.

Answer

At the command prompt, run Winrs.exe -environment.

Answer

From Windows Firewall with Advanced Security, export the policy.

Question 2

You are preparing a custom Windows 7 image for deployment. You need to install a third-party network interface card (NIC) driver in the image. What should you do?

Accepted Answer

Run Dism.exe and specify the /add-driver parameter.

Answer

Run Pkgmgr.exe and specify the /ip parameter.

Answer

Create a new answer file by using Windows System Image Manager (Windows SIM). Run Pkgmgr.exe and specify the /n parameter.

Answer

Create a new answer file by using Windows System Image Manager (Windows SIM). Run Dism.exe and specify the /apply-unattend parameter.

Question 3

You have a computer named Computer1 that runs Windows 7. Computer1 uses an NTFS-formatted USB drive that has ReadyBoost enabled. You need to modify the amount of space that ReadyBoost reserves on the USB drive. What should you do?

Accepted Answer

Open Computer and modify the properties of the USB drive.

Answer

Open Performance Information and Tools and run disk cleanup.

Answer

Open Devices and Printers and modify the properties of the USB drive.

Answer

Open Device Manager and modify the properties of the USB device.

Question 4

You have a computer that runs Windows Vista. You need to identify whether the computer can be upgraded to Windows 7. Which tool should you use?

Accepted Answer

Windows 7 Upgrade Advisor

Answer

Windows Anytime Upgrade for Windows 7

Answer

Windows Anytime Upgrade for Windows Vista

Answer

Windows Vista Upgrade Advisor

Question 5

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

From the Internet Protocol Version 4 (TCP/IPv4) properties of the VPN connection, disable the Use default gateway on remote network setting.

Answer

Configure the VPN connection to use only PPTP.

Answer

Configure the VPN connection to use only L2TP/IPSec.

Answer

From the Internet Protocol Version 4 (TCP/IPv4) properties of the local area connection, disable the Automatic metric setting.

Question 6

You have a computer that runs Windows XP and a USB drive that is protected by using BitLocker To Go. You need to ensure that you can copy files from the computer to the USB drive. The solution must retain the existing files on the USB drive. What should you do?

Accepted Answer

From a computer that runs Windows 7, disable BitLocker To Go for the USB drive.

Answer

From a computer that runs Windows 7, change the file system of the USB drive.

Answer

Log on to Windows XP as member of the Administrators group.

Answer

Log on to Windows XP by using a user account that has an Encrypting File System (EFS) certificate.

Question 7

You install a local printer on a computer. You share the printer. You need to ensure that only members of a local group named Group1 can print documents on the printer. Which settings should you modify on the printer?

Accepted Answer

Security

Answer

Printing preferences

Answer

Priority

Answer

Share

Question 8

You have a computer that runs Windows 7. Multiple users share the computer. The computer is joined to a domain. You need to prevent the users from using more than 2 GB of disk space on drive C. What should you do?

Accepted Answer

Enable disk quota management on Computer1 and configure a default quota limit.

Answer

From a Group Policy object (GPO), enable the Limit profile size setting.

Answer

Enable System Protection for Local Disk (C) and set the disk space usage.

Answer

From a Group Policy object (GPO), enable the Limit the size of the entire roaming user profile cache setting.

Question 9

Your network contains a public computer that runs Windows 7. Multiple users log on to the computer by using a local user account named User1. Users report that they can log on to some secure Web sites by using credentials that were saved by other users. You need to prevent formsbased credentials from being saved on the computer. What should you do?

Accepted Answer

Modify the Windows Internet Explorer AutoComplete settings.

Answer

Remove all generic credentials from Windows Vault.

Answer

Remove all Windows credentials from Windows Vault.

Answer

Modify the Windows Internet Explorer certificates settings.

Question 10

You have two computers that run Windows 7. Both computers are connected to a network and have IP addresses within the 172.16.10.0/24 subnet. You need to ensure that both computers can join a HomeGroup. What should you do?

Accepted Answer

Set the network location to Home network.

Answer

Enable network discovery.

Answer

Configure Windows Firewall to allow the Netlogon service.

Answer

Change the IP addresses to be within the 192.168.1.0/24 subnet.

Question 11

You have a computer that runs Windows 7. You need to identify how much disk space is occupied by previous versions. What should you do?

Accepted Answer

From System, view the System Protection settings.

Answer

At a command prompt, run Diskpart.

Answer

At a command prompt, run Vaultcmd.

Answer

From the properties of drive C, view the previous versions settings.

Question 12

You have a computer named Computer1 that runs Windows 7 and Windows Internet Explorer 8. A user reports that Computer1 has a number of Internet Explorer configuration issues that cause instability when browsing the Internet. You need to configure Internet Explorer to use all default settings. What should you do from Internet Options?

Accepted Answer

From the Advanced tab, click Reset.

Answer

From the Programs tab, click Set programs.

Answer

From the Advanced tab, click Restore advanced settings.

Answer

From the Security tab, click Reset all zones to default level.

Question 13

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

Assign the Manage Documents permission to CREATOR OWNER.

Answer

Restart the Print Spooler service.

Answer

Stop sharing the local printer and then share it again.

Answer

Assign the Manage Documents permission to SYSTEM.

Question 14

You have a computer that runs Windows 7. You generate a System Diagnostic Report and receive the following warning message:
"The Graphics rating for the system is poor and may be the cause of performance problems."
You need to increase the graphics performance of the computer without modifying the current hardware or drivers. What should you do?

Accepted Answer

From Performance Options, modify the visual effects.

Answer

From Personalization, modify the screen saver.

Answer

From Indexing Options, modify the Advanced options.

Answer

From Performance Options, modify the processor scheduling.

Question 15

You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7. You plan to use User State Migration Tool (USMT) 4.0 to migrate user profiles and data from Computer1 to Computer2. You need to prevent some system settings from being migrated. You must achieve this goal by using the minimum amount of administrative effort. Which file should you modify?

Accepted Answer

config.xml

Answer

migapp.xml

Answer

migdocs.xml

Answer

miguser.xml

Question 16

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

Create a NTFS partition.

Answer

Create a mirrored volume.

Answer

Create a system repair disc.

Answer

Log on to the computer by using a different account.

Question 17

A standard user named User1 has a computer that runs Windows 7. You need to ensure that User1 can run Windows Easy Transfer. What should you do?

Accepted Answer

Add User1 to the Administrators group.

Answer

Disable User Account Control (UAC).

Answer

Configure User1 to have a complex password.

Answer

Copy the support folder from the Windows 7 installation media to the local hard disk drive.

Question 18

You have a computer named Computer1 that runs Windows 7. You plan to migrate the user state on Computer1 by using User State Migration Tool (USMT) 4.0. You need to identify which user documents will be included in the migration. What should you do?

Accepted Answer

Run Scanstate.exe and use the /genmigxml option.

Answer

Run Usmtutils.exe and use the /ec option.

Answer

Run Sysprep.exe and use the /audit option.

Answer

Run Loadstate.exe and use the /v:12 option.

Question 19

You have an offline virtual hard disk (VHD) that contains a generalized installation of Windows 7 Ultimate. You need to disable the built-in games in the VHD. You must achieve this goal by using the minimum amount of administrative effort. What should you do?

Accepted Answer

Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Dism.exe and specify the /apply-unattend parameter.

Answer

Start a computer from the VHD. Run Ocsetup.exe and specify the /uninstall parameter. Recapture the VHD.

Answer

Start a computer from the VHD. From Programs and Features, turn off the Games feature and then recapture the VHD.

Answer

Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Pkgmgr.exe and specify the /uu parameter.

Question 20

You have a computer that runs Windows 7 Professional. You need to upgrade the computer to Windows 7 Ultimate. You must achieve this goal in the minimum amount of time. What should you do?

Accepted Answer

Run Windows Anytime Upgrade.

Answer

Run Windows Update.

Answer

From the Windows 7 installation media, run Setup.exe.

Answer

From the Windows 7 installation media, run Migwiz.exe.

Question 21

You need to create a VPN connection. What should you do?

Accepted Answer

From Network and Sharing Center, click Set up a new connection or network and then click Connect to a workplace.

Answer

From Windows Explorer, right-click Computer and then click Map network drive.

Answer

From Windows Explorer, right-click Computer and then click Add a network location.

Answer

From Network and Sharing Center, click Set up a new connection or network and then click Set up a new network.

Question 22

You have two computers named Computer1 and Computer2 that run Windows 7. Computer2 is configured for remote management. From Computer1, you need to remotely execute a third-party command line tool named disk.exe on Computer2. Which command should you run?

Accepted Answer

Winrs r:computer2 disk.exe

Answer

Start disk.exe /d \computer2

Answer

Tscon disk.exe /dest:computer2

Answer

Winrm e disk.exe r:computer2

Question 23

You have two computers named Computer1 and Computer2. You migrate user state data from Computer1 to Computer2. The migrated data contains several Microsoft Office Excel files. You need to ensure that you can open the Excel files by using Excel on Computer2. What should you do?

Accepted Answer

Install Office.

Answer

Disable User Account Control (UAC).

Answer

Modify the default program settings.

Answer

Run Loadstate.exe /i:migapp.xml.

Question 24

You have a computer that has the following hardware configuration:
 1.6 GHz processor (64-bit)
 8 GB RAM
 500 GB hard disk
 Graphics card that has 128 MB RAM
You need to select an edition of Window 7 to meet the following requirements:
 Support DirectAccess.
 Support Windows XP Mode.
 Use all of the installed memory.
 Support joining an Active Directory domain.
Which edition should you choose?

Accepted Answer

Windows 7 Enterprise (64-bit)

Answer

Windows 7 Enterprise (x86)

Answer

Windows 7 Professional (64-bit)

Answer

Windows 7 Ultimate (x86)

Question 25

You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7. Computer1 has a custom application installed. You create a custom XML file named app1.xml that contains the migration settings for the application. You need to migrate the configuration and application data for the custom application from Computer1 to Computer2. What should you do?

Accepted Answer

On Computer1, run Scanstate.exe /i:app1.xml. On Computer2, run Loadstate.exe /i:app1.xml.

Answer

On Computer1, run Loadstate.exe /l:app1. On Computer2, run Scanstate.exe /l:app1.xml.

Answer

On Computer1, run Loadstate.exe /keyfile:app1.xml. On Computer2, run Loadstate.exe /keyfile:app1. xml.

Answer

On Computer1, run Scanstate.exe /genconfig:app1.xml. On Computer2, run Loadstate.exe /config:app1.xml.

Question 26

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

From Backup and Restore, select Change settings.

Answer

From Backup and Restore, select Create a system image.

Answer

From the System Protection tab, create a restore point.

Answer

From the System Protection tab, enable system protection for the new volume.

Question 27

You need to reduce the amount of space currently being used to store system restore points. What should you do?

Accepted Answer

Run Disk Cleanup.

Answer

Run Msconfig.exe.

Answer

Configure disk quotas.

Answer

Configure Windows Backup.

Question 28

You deploy a Windows 7 Enterprise image to a computer on the network. You need to display the detailed activation and license status of the computer. What should you run?

Accepted Answer

Slmgr.vbs and specify the dli parameter

Answer

Msconfig.exe

Answer

Slui.exe

Answer

Winrm.vbs and specify the id parameter

Question 29

You have a Windows image (WIM) file that contains an image of Windows 7. The WIM file is 2 GB. You need to ensure that you can copy the image to CD. What should you do?

Accepted Answer

Run Imagex.exe and specify the /split parameter.

Answer

From the properties of the WIM file, enable compression.

Answer

Run Dism.exe and specify the /cleanup-wim parameter.

Answer

Right-click the WIM file, point to Send To and then click Compressed (zipped) Folder.

Question 30

You plan to deploy Windows 7 by using a virtual hard disk (VHD). You need to ensure that when a computer starts from the VHD, the Windows 7 installation programs will run the out-of-box experience (OOBE) portion of the setup. What should you do?

Accepted Answer

Use ImageX to apply install.wim from the Windows 7 installation media to the VHD.

Answer

Copy install.wim from the Windows 7 installation media to the VHD.

Answer

Start the computer by using the Windows 7 installation media and then select Install now.

Answer

Start the computer by using the Windows Preinstallation Environment (Windows PE) and then run Diskprep.exe.

Question 31

You have a Windows 7 computer that is a member of a workgroup. You need to prevent members of a local group from starting a specific application. You must achieve this goal by using the minimum amount of administrative effort. What should you create?

Accepted Answer

Application control policy

Answer

Administrative template

Answer

IPSec policy

Answer

Software restriction policy

Question 32

Your network contains computers that run either Windows Vista (x86) or Windows 7 (x86). All computers are joined to a domain. You install a computer named Computer1 that runs Windows 7 (64-bit). You share a printer named Printer1 on Computer1. You need to ensure that any user can automatically download and install the drivers for Printer1. What should you do from Printer Properties?

Accepted Answer

Modify the Additional Drivers settings.

Answer

Install a new driver.

Answer

Enable bidirectional support.

Answer

Assign the Manage this printer permission to the Domain Users group.

Question 33

You have a computer that runs Windows 7. You generate a System Diagnostic Report and receive the following warning message:
"The Graphics rating for the system is poor and may be the cause of performance problems."
You need to increase the graphics performance of the computer without modifying the current hardware or drivers. What should you do?

Accepted Answer

Cipher C:\folder1

Answer

Dir C:\folder1 /OE

Answer

Fsutil C:\folder1

Answer

Wfs C:\folder1

Question 34

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

Remove the Modify NTFS permission from the Users group and assign the CREATOR OWNER group the Modify NTFS permission.

Answer

Remove all NTFS permissions from the Users group and assign the CREATOR OWNER group the Full control NTFS permission.

Answer

Deny the Users group the Modify NTFS permission and assign the Authenticated Users group the Read and Write NTFS permissions.

Answer

Deny the Users group the Full control NTFS permission and assign the Authenticated Users group the Read & execute NTFS permission.

Question 35

You have a computer that runs Windows 7. Your network has a SSTP VPN server that uses a self signed certificate. When you connect to the VPN server, you receive the following error message: 
"Your computer does not trust the issuing certification authority (CA) of the SSTP VPN servers certificate".
 You need to prevent the error message from appearing when you connect to the VPN server. What should you do?

Accepted Answer

From Certificate Manager, import the server's certificate into the Trusted Root Certification Authorities store.

Answer

From the properties of the VPN connection, modify the dialing options.

Answer

From the properties of the VPN connection, modify the data encryption settings.

Answer

From Certificate Manager, import the servers certificate into the Personal store.

Question 36

You perform a clean installation of Windows 7 on a computer. You need to ensure that you can run Windows XP Mode in Windows 7. What should you do?

Accepted Answer

Enable hardware-assisted virtualization.

Answer

Create a Data Execution Prevention (DEP) exception.

Answer

Install Windows XP in the same partition as Windows 7.

Answer

Install Windows XP in a different partition than Windows 7.

Question 37

You have a computer that runs Windows 7 Home Premium. You need to upgrade the computer to Windows 7 Ultimate. You must achieve this goal in the minimum amount of time. What should you do?

Accepted Answer

Perform a Windows Anytime Upgrade.

Answer

Download and run the Windows 7 Upgrade Advisor.

Answer

Insert the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option.

Answer

Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option.

Question 38

You have a custom image of Windows 7. You discover that the boot configuration data store in the custom image is corrupted. You need to create a new configuration data store within the custom image. What should you do?

Accepted Answer

Run Imagex.exe and specify the /mountrw parameter. Run Bcdedit.exe.

Answer

Run Imagex.exe and specify the /append parameter. Run Bcdedit.exe.

Answer

From Windows System Image Manager (Windows SIM), select the image and then create a configuration set.

Answer

From Windows System Image Manager (Windows SIM), select the image and then create a catalog.

Question 39

You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the minimum amount of time. What should you do?

Accepted Answer

Run Cipher.exe /x.

Answer

Run Ntbackup.exe /p.

Answer

From Backup and Restore, click Back up now.

Answer

From Backup and Restore, click Create a system image.

Question 40

You download a Windows PowerShell snap-in. You need to ensure that the snap-in is automatically imported when you open a new PowerShell session. What should you do?

Accepted Answer

Create a new PowerShell console file. Update the PowerShell shortcut and specify the psconsolefile option.

Answer

Modify the PowerShell execution policy.

Answer

Create a new PowerShell manifest file. Update the PowerShell shortcut and specify the file option.

Answer

Create a new PowerShell formatting and type file. Copy the file to the %SystemRoot%\system32\Windows PowerShell\v1.0 folder.

Question 41

You have a computer that runs Windows XP. The computer has one basic disk that contains a single partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need to install Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk (VHD). What should you do first?

Accepted Answer

Shrink the primary partition.

Answer

Create a second partition.

Answer

Convert the hard disk to a GPT disk.

Answer

Convert the hard disk to a dynamic disk.

Question 42

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

Assign User1 Write NTFS permission on the D:\data folder.

Answer

Create a local user named User1.

Answer

Add User1 to the local Power Users group.

Answer

Assign User1 Full control share permissions to the Data share.

Question 43

Your network contains a Network Policy and Access Services server named Server1. All certificates in the organization are issued by an enterprise certification authority (CA) named Server2. You have a standalone computer named Computer1 that runs Windows 7. Computer1 has a VPN connection that connects to Server1 by using SSTP. You attempt to establish the VPN connection to Server1 and receive the following error message: "A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider." You need to ensure that you can successfully establish the VPN connection to Server1. What should you do on Computer1?

Accepted Answer

Import the root certificate to the computer's Trusted Root Certification Authorities store.

Answer

Import the root certificate to the user s Trusted Publishers store.

Answer

Import the server certificate of Server1 to the user s Trusted Root Certification Authorities store.

Answer

Import the server certificate of Server1 to the computer s Trusted Root Certification Authorities store.

Question 44

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

From the Security settings of the folder, assign the user the Read NTFS permission.

Answer

Allow file and printer sharing through Windows Firewall.

Answer

Change the network location from a Public network to a Home or Work network.

Answer

From the Advanced Sharing settings of the folder, assign the user the Read share permission.

Question 45

You have a portable computer that runs Windows 7. The computer is joined to a domain. Multiple users log on to the computer. You need to prevent the computer from displaying the username of the last user who logged on. What should you do?

Accepted Answer

From the local computer policy, modify the local security policy.

Answer

From Control Panel, modify the User Profiles settings.

Answer

From Control Panel, modify the Personalization settings.

Answer

From the local computer policy, add a policy template.

Question 46

You have a computer named Computer1 that runs Windows 7. You have a server named Server1 that runs Windows Server 2008. Computer1 and Server1 have IPv4 and IPv6 installed. You need to identify whether you can connect to Server1 by using IPv6. What should you do?

Accepted Answer

Run Ping Server1 -6.

Answer

Run Ping Server1 -n 6.

Answer

Run Net view \Server1.

Answer

Open \server1 from the Run dialog box.

Question 47

You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to install Windows 7 on the computer by using the DVD installation media and receive the following error message: "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device." You need to ensure that you can install Windows 7 on the computer by using the DVD installation media. What should you do?

Accepted Answer

From the BIOS, modify the startup order.

Answer

From the BIOS, enable Pre-Boot Execution Environment (PXE).

Answer

Create an answer file named oobe.xml and place the file on the hard disk drive.

Answer

Create an answer file named autounattend.xml and place the file on the hard disk drive.

Question 48

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

From Control Panel, modify the Set your default programs settings.

Answer

Select a media file. Right-click the file and select Open with.

Answer

Select a media file. Right-click the file and select Restore previous versions.

Answer

From Control Panel, modify the Set program access and computer defaults settings.

Question 49

You deploy a custom image to a computer and discover that the Telnet Client feature is disabled. You need to ensure that the Telnet Client feature is enabled when you deploy the image. You must achieve this goal in the minimum amount of time. What should you do?

Accepted Answer

Mount the image. Run Dism.exe and specify /image and /enable-feature:TelnetClient switches. Commit the changes and unmount the image.

Answer

Enable the Telnet Client feature on the computer. Generalize the computer and capture the image.

Answer

Create an unattended file that enables Telnet Client. Generalize the computer and specify the unattended file. Capture the image.

Answer

Mount the image. Run Ocsetup.exe TelnetClient. Commit the changes and unmount the image.

Question 50

You have a computer that runs Windows 7. Four users share the computer. You create a folder named C:\data. The Users group has Full control permission to the folder. You need to configure security on the folder to meet the following requirements:
 Allow users to create files.
 Allow users to delete files that they create.
 Prevent users from deleting files created by other users.
What should you do?

Accepted Answer

Modify the authentication methods of the default Web site.

Accepted Answer

Modify the NTFS permissions of the %systemroot%\inetpub\wwwroot folder

Answer

Modify the properties of Group1.

Answer

Assign an SSL certificate to the default Web site.

Windows Review - Part C

Create a free account to finish this quiz

Questions in this quiz (50)

Information

Feedback

What do you think of the new look?