Quiz
Quiz: DHC-6-300 Memory Items
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (19)
1Memory items for: Engine Failure Prior to rotation.
- ABoth power levers to idle and apply brakes.
- BPower lever of the failed engine to idle and apply brakes.
- CPower lever of the failed engine to idle and maintain directional control with rudder.
2Memory items for: Engine failure airborne, after VMC, autofeather ON.
- ASet max power, confirm flaps 10, confirm if affected prop has autofeathered and feather only if no autofeather and total power loss.
- BSet max power, confirm flaps 10.
- CConfirm flaps 10, confirm if affected prop has autofeathered and feather only if no autofeather and total power loss.
- DSet max power, confirm if affected prop has autofeathered and feather only if no autofeather and total power loss.
3Memory items for: Engine failure in flight (autofeather off).
- ASet max power, and, for the failed engine: Power lever: Retard to 10 PSI position, prop lever: feather, fuel lever: off
- BSet max power, and, for the failed engine: Power lever: Idle, prop lever: feather, fuel lever: off
- CFor the failed engine: Power lever: Idle, prop lever: feather, fuel lever: off
- DSet max power, and, for the failed engine: Fuel lever: off
4Memory items for: Left or right engine fire on ground.
- AStop aircraft
Set parking brake
Lift the fire bell mute switch
Both power levers idle
Feather both prop levers
Both fuel levers off
Affected engine 'fuel emergency' switch off
Pull the affected engine 'fire pull handle'
Both 'boost pump' switches off
Evacuate aircraft - BStop aircraft
Set parking brake
Lift the fire bell mute switch
Both power levers idle
Feather both prop levers
Both fuel levers off
Both 'fuel emergency' switches off
Pull both engine 'fire pull handles'
Both 'boost pump' switches off
Evacuate aircraft - CStop aircraft
Set parking brake
Lift the fire bell mute switch
Affected engine power lever idle
Feather affected engine prop lever
Fuel lever of the affected engine off
Affected engine 'fuel emergency' switch off
Pull the affected engine 'fire pull handle'
Both 'boost pump' switches off
Evacuate aircraft
- AStop aircraft
5Memory items for: Left or right engine fire in flight.
- ALift the fire bell mute switch
Set max power (unaffected engine)
For the affected engine:
Power lever: retard to 10 PSI position, prop lever: feather, fuel lever: off, 'fuel emergency' switch: off, 'fire pull handle': pull, 'boost pump' switch: off - BLift the fire bell mute switch
Set max power (unaffected engine)
For the affected engine: power lever: retard to 10 PSI position, prop lever: feather, fuel lever: off. - CSet max power both engines
For the affected engine:
Power lever: retard to 10 PSI position, prop lever: feather, fuel lever: off, 'fuel emergency' switch: off, 'fire pull handle': pull, 'boost pump' switch: off
- ALift the fire bell mute switch
6Memory items for: one engine inoperative missed approach (flaps 10).
- ASet max power on the unaffected engine and climb at 80 KIAS.
- BSet max power on the unaffected engine and set pitch to +10 degrees.
- CSet max power on the unaffected engine and climb at 90 KIAS.
- DSet max power on the unaffected engine and climb at 100 KIAS.
7Memory items for: no light-up during start or failure to accelerate during start.
- AFor the affected engine:
Fuel lever: off, start switch: continue to motor for 10 seconds - BFor the affected engine:
Fuel lever: off, Prop: feather. - CFor the affected engine:
Prop: feather, Start switch: continue to motor for 10 seconds.
- AFor the affected engine:
8Memory items for: High T5 temperature during start.
- AFor the affected engine:
Fuel lever: off, Start switch: continue to motor for 10 seconds - BFor the affected engine:
Fuel lever: off, Prop: feather. - CFor the affected engine:
Prop: feather, Start switch: continue to motor for 10 seconds.
- AFor the affected engine:
9Memory items for: Generator light fails to appear following start.
- AEnsure the generator switch of the affected engine is OFF, then, if the light still fails to appear:
'BUS TIE' switch: OPEN
MASTER switch: OFF
Shut down aircraft following normal procedures - BShut down aircraft following normal procedures
- C'BUS TIE' switch: OPEN
MASTER switch: OFF
Shut down aircraft following normal procedures - DCheck the position of generator switch of the affected engine
MASTER switch: off
Shut down aircraft following normal procedures
- AEnsure the generator switch of the affected engine is OFF, then, if the light still fails to appear:
10Memory items for: Stall recovery.
- AReduce pitch attitude and roll wings level, set max power and increase airspeed to VREF or higher.
- BSet max power and increase airspeed to VREF or higher.
- CIncrease airspeed to VREF or higher, set max power.
- DRoll wings level, set max power and increase airspeed to VREF or higher.
11Memory items for: engine shutdown in flight
- ASet max power on unaffected engine, and, for the affected engine: Power lever: retard to 10 PSI position, Prop lever: feather, Fuel lever: off.
- BSet max power on unaffected engine, and, for the affected engine: Power lever: idle, Prop lever: feather, Fuel lever: off.
- CSet max power on unaffected engine.
- DFor the affected engine: Power lever: idle, Prop lever: feather, Fuel lever: off.
12Memory items for: Uncommanded feather.
- ASet max power on unaffected engine, and, for affected engine, power lever: idle
- BSet max power on unaffected engine, and, for affected engine, power lever: set to 10 PSI position
- CFor affected engine, power lever: idle
- DFor affected engine, power lever: set to 10 PSI position
13Memory items for: Propeller reversal (blade latches NOT fitted).
- AFor the affected engine: Power lever: retard to 10 PSI position, Prop lever: feather, Fuel lever: off.
- BFor the affected engine: Power lever: idle, Prop lever: feather, Fuel lever: off.
- CSet max power on the unaffected engine, and, for the affected engine: Power lever: idle, Prop lever: feather.
14Memory items for: 'Reset Props' light during final approach.
- ASet prop levers to MAX RPM.
- BSet prop levers to minimum governing.
- CSet prop levers to 76% NP.
- DIncrease speed to greater than 80 KIAS.
15Memory items for: Aileron trim tab runaway.
- AReduce speed to relieve control forces, press aileron trim switch in the appropriate direction, and, when control forces are relieved, pull AIL TRIM ACT circuit breaker.
- BPull AIL TRIM ACT circuit breaker.
- CPress aileron trim switch in the appropriate direction and after three seconds, pull AIL TRIM ACT circuit breaker.
16Memory items for: Engine failure airborne, prior to VMC.
- APower levers - retard as needed to maintain directional control.
Land straight ahead (not necessarily runway heading). - BPower levers - retard as needed to maintain directional control.
Land straight ahead and aligned with the runway heading. - CPower lever of the affected engine - retard.
Land straight ahead (not necessarily runway heading). - DPower lever of the affected engine - retard.
Land straight ahead and aligned with the runway heading.
- APower levers - retard as needed to maintain directional control.
17Memory items for: Engine oil pressure light.
- ACheck the oil pressure gauge and if showing less than 40 PSI, shut down the affected engine.
- BCheck the oil pressure gauge and if showing less than 40 PSI, feather affected engine prop lever.
- CCheck the oil pressure gauge and if showing less than 80 PSI, shut down the affected engine.
18Memory items for: T5 exceeds limit
- AReduce the power lever of the affected engine until acceptable T5 is achieved and if acceptable T5 cannot be achieved: shut down the affected engine.
- BSet max power and feather the affected engine prop lever
- CIncrease the power lever of the affected engine until acceptable T5 is achieved and if acceptable T5 cannot be achieved: shut down the affected engine.
19Memory items for: engine overspeed (NG exceeds limit)
- APower lever of affected engine: reduce until acceptable NG is achieved
If acceptable NG cannot be achieved: shut down affected engine - BPower lever of affected engine: increase until acceptable NG is achieved
If acceptable NG cannot be achieved: shut down affected engine - CSet max power
Power lever of affected engine: increase until acceptable NG is achieved.
If acceptable NG cannot be achieved: shut down affected engine
- APower lever of affected engine: reduce until acceptable NG is achieved
Information
- Description
- This quiz tests your knowledge about the memory items (for the Grand Canyon Scenic Operation) and is NOT an official source of information. Always refer to the relevant manuals.
- Author
- Rieul Gendron
- Language
- English
- Views
- 9
- Tags
- Rating
- No ratings yet Rate this quiz