Question 1
Question
A requirement for military explosives is that raw materials must be
Answer
-
cheap
-
nonhygroscopic
-
common to America
-
vital to the war effort
Question 2
Question
Volatility is the tendency of a substance to produce
Answer
-
pressure
-
energy
-
vapors
-
heat
Question 3
Question
What property of an explosive do we refer to by the word “hygroscopicity?”
Answer
-
Moisture-absorbing property
-
Tendency to produce sensitive metallic salts.
-
Ability of an explosive to be cast into a mold or form
-
Ability to liberate gaseous products during detonation.
Question 4
Question
Upon what factor does the rate of detonation depend?
Answer
-
Degree of confinement and loading density
-
Degree of confinement and volatility
-
Volatility and loading density
-
Loading density only
Question 5
Question
What are the basic components of an explosive train?
Answer
-
Fuze, detonator, booster, and bursting charge.
-
Detonator, booster, and a bursting charge.
-
Fuze, booster, and a bursting charge.
-
Detonator and booster only
Question 6
Question
What does an explosive train booster do?
Answer
-
Detonates the fuze
-
Detonates the main charge
-
Transmits energy from one detonating component to the next
-
Controls the delay in the functioning of the fuze explosive train
Question 7
Question
How can you achieve an airburst with a general-purpose bomb?
Answer
-
Use a time action high-explosive (HE) train
-
With a super quick action HE train
-
With a delay action HE train
-
Use a nondelay delay
Question 8
Question
What effect does more damage than the fragmentation effect of a specific bomb?
Answer
-
Heat
-
Blast
-
Detonation
-
Penetration
Question 9
Question
The penetrating action of a shaped charge is the result of the
Answer
-
size of the burster charge
-
type and amount of explosive
-
shock wave and a jet of dense gas
-
density and thickness of the target
Question 10
Question
The four factors that control the visibility of pyrotechnics are candlepower, color, weather, and
Answer
-
light
-
altitude
-
humidity
-
chemical composition
Question 11
Question
What are the classifications of pyrotechnics?
Answer
-
Illuminants and signals only
-
Illuminants and igniters only
-
Illuminants and combinations of signals only
-
Illuminants, signals, combinations of signals and illuminants, and simulators
Question 12
Question
When considering pyrotechnics, two types of effects for signals are
Answer
-
fire and flash
-
heat and flash
-
smoke and heat
-
light and smoke
Question 13
Question
What do the colored bands, letters, or patches on signal munitions indicate?
Answer
-
Color of the signal produced
-
Type of pyrotechnic ammunition
-
Different factory modification of signals
-
Different manufacturer identification codes
Question 14
Question
What pyrotechnic effect is produced by the AN–MK13 signal?
Answer
-
Noise only
-
Flare and noise
-
Smoke and flare
-
Smoke and noise
Question 15
Question
When and where is the MK124 Mod 0 signal used?
Answer
-
Day and land use only
-
Night and sea use only
-
Day or night, land use only
-
Day or night, land or sea use
Question 16
Question
How much light does the M127A1 signal produce?
Answer
-
50,000 candlepower
-
100,000 candlepower
-
1,000,000 candlepower
-
2,000,000 candlepower
Question 17
Question
What is the largest caliber ammunition that we classify as “small arms”?
Answer
-
Caliber .38
-
Caliber .50
-
5.56 millimeter
-
7.62 millimeter
Question 18
Question
What shotgun round is the exception to the gauging principle?
Question 19
Question
What hazard is involved in using blank ammunition?
Question 20
Question
What are the components of a typical small-arms cartridge?
Answer
-
Cartridge case, primer, bullet, and propellant
-
Cartridge case, primer, bullet, and detonator
-
Cartridge case, shot pellets, and propellant
-
Cartridge case, propellant, and tracer
Question 21
Question
What substance is the explosive filler for the M30 practice grenade?
Answer
-
Inert powder
-
Black powder
-
Composition B
-
White phosphorus
Question 22
Question
How far in front of an M18A1 mine do we consider inside the danger zone?
Answer
-
50 meters
-
100 meters
-
250 meters
-
300 meters
Question 23
Question
How far behind an M18A1 mine should personnel take cover before they fire it?
Answer
-
50 meters
-
100 meters
-
250 meters
-
300 meters
Question 24
Question
What mortar has a short range and a small explosive charge?
Question 25
Question
What device(s) do we use to detonate high explosives (HE)?
Answer
-
Firing wire
-
Blasting caps
-
Galvanometer
-
Detonating cord clip
Question 26
Question
What device is used to initiate time fuse?
Answer
-
M60 igniter
-
Firing wire
-
Galvanometer
-
Blasting machine
Question 27
Question
The M112 demo block is made of what substance?
Answer
-
Ammonia
-
Nitroglycerin
-
Black powder
-
Composition C–4
Question 28
Question
The difference between commercial dynamite and military dynamite is that military dynamite does not contain
Answer
-
initiators
-
nitroglycerin
-
gelatin dynamite
-
ammonia dynamite
Question 29
Question
In what length is fire wire issued?
Answer
-
50 feet
-
100 feet
-
500 feet
-
1000 feet
Question 30
Question
How do we classify bomb fuzes?
Answer
-
Action and contents
-
Position and action
-
Method of arming and contents
-
Position, action, and method of arming
Question 31
Question
The main types of fuze actions are impact, time, and
Answer
-
electrical.
-
hydraulic
-
proximity
-
inertia
Question 32
Question
Where is a proximity fuze placed on the bomb?
Answer
-
Nose
-
Tail
-
Nose and tail
-
Between the lugs
Question 33
Question
In an electronically-timed fuze, what component replaces the arming vanes used in mechanically timed fuzes?
Question 34
Question
The design of which safety feature is to prevent movement of the arming heads, arming stems, and strikers while the fuze is being handled?
Answer
-
Seal wires
-
Cotter pins
-
Safety blocks
-
“Detonator safe” feature
Question 35
Question
What action must you take to set the “SECONDS TO ARM” setting below six seconds on an M904 fuze?
Answer
-
Depress the time lock
-
Install the stop screw in the fuze body
-
Remove the stop screw from the fuze body
-
Depress the detent pin on the arming vane shaft
Question 36
Question
What adapter booster is used with the M904 fuze?
Question 37
Question
In a bomb body, where is the M905 fuze installed?
Question 38
Question
The FMU–54 series tail fuzes are used in
Answer
-
laser-guided bomb series
-
BLU–109/B series guided bombs
-
MK80 and M series general-purpose bombs with conical fins
-
MK80 series general-purpose bombs with an air inflatable retarder
Question 39
Question
With electrical fuzes, which device is used in place of arming wire?
Answer
-
Bungee cord.
-
Battery-firing device
-
Linear-shaped charge
-
Target-detecting device
Question 40
Question
How many FZU–2/B boosters are used with the FMU–81/B fuze when installed in the nose fuze well and the tail fuze well, respectively?
Answer
-
One; four
-
Four, two.
-
Two; four
-
Four; one
Question 41
Question
What component provides the electrical power needed to operate the FMU–139A/B fuze?
Answer
-
FZU–39/B sensor
-
FZU–48/B initiator
-
Battery-firing device
-
MK32 Mod 1 arming device
Question 42
Question
The FMU–143 series fuze was designed for use in
Question 43
Question
What provides the electrical power needed to operate the FMU–143 series fuze?
Question 44
Question
What hazard is associated with the DSU–33 proximity sensor?
Answer
-
Explosives
-
Fragmentation
-
Thermal battery
-
Radio frequencies
Question 45
Question
Which sensor is a radio frequency (RF) radar ranging system used with the suspension utility unit (SUU)–64/B, SUU–65/B, and SUU–66/B dispensers?
Answer
-
FZU–39/B
-
FMU–56/B.
-
FMU–110/B
-
FMU–124/B
Question 46
Question
What does HOF stand for on the FZU–39/B proximity sensor?
Answer
-
Hour of flight.
-
Hour of function
-
Height of function
-
Height of fragmentation
Question 47
Question
What component is used to adapt a nose fuze for an M series bomb?
Answer
-
Fuze adapter
-
Bomb adapter
-
Adapter booster
-
Adapter burster
Question 48
Question
Which fin provides a high-drag, low-altitude bombing capability for the M117 bomb?
Answer
-
BSU–50/B
-
BSU–49/B
-
BSU–93/B
-
MAU–103
Question 49
Question
Which air inflatable retarder (AIR) fin is used on the MK82 bomb?
Answer
-
BSU–49/B
-
BSU–50/B
-
BSU–92
-
BSU–93/B
Question 50
Question
What air inflatable retarder (AIR) fin is used on the MK84 bomb?
Answer
-
BSU–49/B
-
BSU–50/B
-
BSU–92
-
BSU–93/B
Question 51
Question
Which bomb is used as the warhead in the GBU–28A/B?
Answer
-
BLU–113
-
BLU–118
-
BLU–122
-
BLU–126
Question 52
Question
Which bomb is filled with a thermobaric explosive?
Answer
-
BLU–113
-
BLU–118
-
BLU–122
-
BLU–126
Question 53
Question
Externally, the M129 leaflet bomb is similar to the
Question 54
Question
Which suspension utility unit (SUU) does the PDU–5/B utilize?
Answer
-
SUU–64/B
-
SUU–65/B
-
SUU–66/B
-
SUU–76C/B
Question 55
Question
The BLU–126/B bomb is identical to the
Question 56
Question
What is the net explosive weight (NEW) of the BLU–126/B?
Answer
-
27 pounds
-
92 pounds
-
192 pounds
-
270 pounds
Question 57
Question
What is the weight of the BDU–33 series practice bomb?
Answer
-
10 pounds
-
20 pounds
-
25 pounds
-
45 pounds
Question 58
Question
The BDU–48/B resembles the ballistics of the
Answer
-
MK82 high-drag munition
-
MK82 low-drag munition
-
M117 high-drag munition
-
MK84 low-drag munition
Question 59
Question
Which suspension utility unit (SUU) dispenser does the CBU–87 cluster bomb use?
Answer
-
SUU–66
-
SUU–65
-
SUU–64
-
SUU–30
Question 60
Question
Which submunitions are loaded into a CBU–87 cluster bomb?
Answer
-
BLU–61 bomblets
-
BLU–63 bomblets
-
BLU–97 bomblets
-
MK118 bomblets
Question 61
Question
What is the only difference between the CBU–87/B and the CBU–87A/B cluster bombs?
Answer
-
The A/B has modified bomblets
-
The A/B has the live FZU–39/B sensor installed
-
The B comes in a different container
-
The B has the live FZU–39/B sensor installed
Question 62
Question
How many different types of bomblets are loaded into a single CBU–89/B cluster bomb at one time?
Question 63
Question
How many projectiles are contained in each BLU–108/B submunition?
Question 64
Question
What ejects the BLU–108 series submunition into the airstream?
Question 65
Question
The components of a wind corrected munitions dispenser consist of a fin guidance system, a variable position umbilical connector, and
Question 66
Question
Which wind-corrected munitions dispenser component cants the fins to spin the dispenser during flight?
Question 67
Question
What 20 millimeter (mm) round is used for drill or testing feeder assemblies?
Answer
-
Target practice tracer
-
Target practice
-
Dummy
-
Inert
Question 68
Question
What M505 series fuze safety feature prevents accidental arming during handling?
Answer
-
Fuze is bore safe
-
M505 series fuze is inertia armed
-
Rotor assembly is safety pinned until loading
-
M505 series fuze does not have a safety, but it does require very careful handling
Question 69
Question
What is the arming delay distance for the M505 fuze?
Answer
-
5–10 feet
-
10–35 feet
-
45–50 feet
-
50–55 feet
Question 70
Question
The identifying information on a 20 millimeter (mm) round of ammunition is marked on the
Answer
-
bourrelet
-
projectile
-
primer
-
fuze
Question 71
Question
When 20 millimeter (mm) ammunition is bulk-packed, how many rounds may you expect to find in an M548 container?
Answer
-
50–100
-
150–175
-
200–250
-
275–300
Question 72
Question
What aircraft cannon fires the 25 millimeter (mm) round?
Answer
-
GAU–2.
-
GAU–8
-
GAU–12
-
GAU–18
Question 73
Question
How can you tell a 25 millimeter (mm) dummy cartridge from other 25 mm rounds?
Answer
-
Dummy cartridge is painted blue.
-
Dummy cartridge is hollow and lighter
-
Dummy cartridge projectile is nonseparable and the total cartridge is gold in color
-
Dummy cartridge projectile is gold in color with white lettering on the cartridge case
Question 74
Question
When 25 millimeter (mm) ammunition is bulk-packed, how many rounds you expect to find in a CNU–405 container?
Answer
-
80 or 100
-
150 or 175
-
200 or 250
-
275 or 300
Question 75
Question
How is ignition from the primer carried to the propellant in a 30 millimeter (mm) target practice round?
Answer
-
The primer vents directly into the propellant
-
The propellant is ignited electrically when the gun is fired
-
The primer ignites black power in a flash tube, which ignites the propellant
-
The primer activates the M505 time delay fuze, which ignites the propellant after it is fully armed and detonates.
Question 76
Question
What device holds the ball rotor of the 30 millimeter (mm) M505A3 impact fuze in an unarmed position until it is fired?
Answer
-
Lock ring
-
Split latch
-
Safety block
-
Detonator safety latch
Question 77
Question
Which component allows the 30 millimeter (mm) armor-piercing round to achieve target penetration?
Question 78
Question
What is the purpose of the 30 millimeter (mm) dummy ammunition?
Answer
-
As ballast
-
For target practice on small ranges
-
For use in static displays and award presentations
-
As familiarization training and mechanical cycling of the gun system
Question 79
Question
How long does the red tracer composition burn in the 40 millimeter (mm) AAA, target practice tracer (M91) round?
Answer
-
10 seconds
-
12 seconds
-
14 seconds
-
16 seconds
Question 80
Question
Name the components of a 40 millimeter (mm) round.
Answer
-
Ignition booster, cartridge case, and projectile.
-
Propellant, cartridge case, and ignition booster
-
Propellant, cartridge case, ignition booster, and fuze
-
Primer, cartridge case, propellant charge, projectile, and fuze.
Question 81
Question
What is the total number of rounds can the MK1 ammunition box hold?
Question 82
Question
What aircraft fires 105 millimeter (mm) ammunition?
Question 83
Question
What type of explosive is loaded in the projectile of the 105 millimeter (mm) high-explosive (HE) round?
Question 84
Question
Approximately how many fragments will the high fragmentation (HF) PGU–45/B projectile produce?
Question 85
Question
What is the factory set height of burst (HOB) for the FMU–160/B fuze to optimize lethality?
Answer
-
15 feet
-
30 feet
-
32 feet
-
42 feet
Question 86
Question
The 105 millimeter (mm) clearing cartridge was designed to
Answer
-
clean the bore of a 105 mm cannon
-
prepare the 105 mm cannon for shipping
-
clear the immediate area around a ground target
-
clear a projectile lodged in the bore of a 105 mm cannon
Question 87
Question
What are countermeasure flares designed to do?
Answer
-
Emergency signaling by a downed aircraft
-
Illuminate emergency landing fields at night
-
Emergency signaling to rescue aircraft from the ground
-
Divert enemy aircraft infrared/heat-seeking missiles from friendly aircraft
Question 88
Question
Which impulse cartridge initiates the MJU–7/B flare?
Answer
-
BBU–35/B
-
BBU–36/B
-
BBU–46/B
-
BBU–47/B
Question 89
Question
The SD–206 infrared flare (Smokey Devil) provides
Answer
-
less heat than the M206 flare
-
more heat than the M206 flare
-
more flexibility due to its smaller size
-
smoke to simulate a flare for training purposes
Question 90
Question
Which impulse cartridge does the RR–170 chaff cartridge use?
Answer
-
BBU–35/B
-
BBU–36/B
-
BBU–45/B
-
BBU–46/B
Question 91
Question
The LUU–2 series aircraft flare produces
Answer
-
500,000 candlepower for an average burn time of three minutes
-
300,000 candlepower for an average burn time of two minutes
-
two million candlepower for an average burn time of five minutes
-
one million candlepower for an average burn time of five minutes
Question 92
Question
What output does the LUU–5/B target marker produce?
Answer
-
Red light
-
Green light
-
White light
-
Yellow light
Question 93
Question
What output does the LUU–19 series illumination flare produce?
Question 94
Question
In which direction are flares launched from the SUU–25E/A flare dispenser?
Answer
-
Downward
-
Rearward
-
Sideward
-
Forward
Question 95
Question
What impulse cartridge supplies the gas pressure to launch the flares from the SUU–25E/A dispenser?
Answer
-
ARD 446–1
-
ARD 863–1
-
MK2 Mod 0.
-
MK107 Mod 0
Question 96
Question
The gas pressure produced by the impulse in an SUU–25 ejects the flare at a speed of approximately
Question 97
Question
What are initiators, found in cartridge-actuated devices (CAD), designed to do?
Question 98
Question
What are removers, found in cartridge-actuated devices (CAD), designed to do?
Answer
-
Remove obstacles from the ejecting pilot’s path
-
Remove the aircraft seat from the aircraft
-
Eject crew members safely
-
Eject aircraft canopy
Question 99
Question
What are the two types of impulse cartridges found in propellant-actuated devices (PADS)?
Question 100
Question
What must you do before you handle any impulse cartridge?