Quiz
Ch5 Module 6 VPN Gateway
This quiz has question types that open in the usual player.
Questions in this quiz (23)
1A virtual network gateway is composed of [blank_start]two[blank_end] or more VMs that are deployed to a specific subnet you create called the [blank_start]gateway[blank_end] subnet.
- Atwo
- Bgateway
2Virtual network gateway VMs contain [blank_start]routing tables[blank_end] and run specific [blank_start]gateway services[blank_end]
- Arouting tables
- Bgateway services
3What is correct sequence of creating VPN Gateway?
1. Create VPN Gateway
2. Configure VPN device
3. Create VNets and subnets
4. Specify DNS server (optional)
5. Create VPN connection
6. Create Local network gateway
7. Create Gateway subnet- A1, 4, 3, 5, 7, 2, 6
- B3, 5, 2, 7, 4, 1, 6
- C3, 4, 7, 1, 6, 2, 5
- D3, 4, 7, 1, 6, 5, 2
4Route-based is also selected when you coexist with an [blank_start]ExpressRoute[blank_end] gateway or if you need to use [blank_start]IKEv2[blank_end]. Policy-based gateways support only [blank_start]IKEv1[blank_end].
- AExpressRoute
- BIKEv2
- CIKEv1
5Basic and [blank_start]VpnGw1[blank_end] SKUs are only supported in Generation1. [blank_start]VpnGw4[blank_end] and [blank_start]VpnGw5[blank_end] SKUs are only supported in Generation2.
- AVpnGw1
- BVpnGw4
- CVpnGw5
6A virtual network cannot be associated with more than [blank_start]one[blank_end] gateway.
- Aone
7Policy-based VPNs encrypt and direct packets through IPsec tunnels based on the [blank_start]IPsec[blank_end] policies configured with the combinations of address prefixes between your on-premises network and the Azure VNet.
- AIPsec
8The policy (or traffic selector) is defined as an [blank_start]access list[blank_end] in the VPN device configuration.
- Aaccess list
9Policy-Based VPNs can only be used on the [blank_start]Basic gateway[blank_end] SKU and is not compatible with other gateway SKUs.
- ABasic gateway
10You can have only [blank_start]one[blank_end] tunnel when using a Policy-based VPN.
- Aone
11You can only use Policy-based VPNs for [blank_start]site-to-site[blank_end] connections, and only for certain configurations.
- Asite-to-site
12Once a virtual network gateway has been created, you can't change the VPN type.
- ATrue
- BFalse
13Which of the following Gateway SKUs has this features:
S2S Tunnels -30, P2S connections - 1000, Throughput - 1.25 Gbps- AGen2 VPNGw3
- BGen2 VPNGw2
- CGen1 VPNGw2
- DGen1 VPNGw3
14Which of the following Gateway SKUs has this features:
S2S Tunnels -100, P2S connections - 5000, Throughput - 5.0 Gbps- AGen2 VPNGw4
- BGen2 VPNGw3
- CGen2 VPNGw5
- DGen2 VPNGw6
15Which of the following Gateway SKUs has this features:
S2S Tunnels -30, P2S connections - 500, Throughput - 1.25 Gbps- AGen1 VPNGw3
- BGen1 VPNGw2
- CGen2 VPNGw2
- DGen2 VPNGw3
16Which of the following Gateway SKUs has this features:
S2S Tunnels -30, P2S connections - 1000, Throughput - 2.5 Gbps- AGen1 VPNGw4
- BGen2 VPNGw3
- CGen1 VPNGw3
- DGen2 VPNGw4
17Which of the following Gateway SKUs has this features:
S2S Tunnels -30, P2S connections - 500, Throughput - 1.0Gbps- AGen1 VPNGw1
- BGen1 VPNGw2
- CGen2 VPNGw1
- DGen2 VPNGw2
18Which of the following Gateway SKUs has this features:
S2S Tunnels -30, P2S connections - 250, Throughput - 650 Mbps- AGen1 VPNGw1
- BGen2 VPNGw1
- CGen2 VPNGw2
- DGen1 VPNGw2
19Which of the following Gateway SKUs has this features:
S2S Tunnels -100, P2S connections - 10000, Throughput - 10.0 Gbps- AGen2 VPNGw3
- BGen2 VPNGw4
- CGen2 VPNGw5
- DGen2 VPNGw6
20If you plan to use this local network gateway in a BGP-enabled connection, then the minimum prefix you need to declare is the host address of your [blank_start]BGP Peer IP[blank_end] address on your VPN device.
- ABGP Peer IP
21To configure your VPN device, you will need:
A [blank_start]shared key[blank_end]. The same [blank_start]shared key[blank_end] that you specify when creating the VPN connection.
The [blank_start]public IP address[blank_end] of your VPN gateway. The [blank_start]IP address[blank_end] can be new or existing.- Ashared key
- Bshared key
- Cpublic IP address
- DIP address
22Every Azure VPN gateway consists of two instances in an active-standby configuration. For any [blank_start]planned maintenance[blank_end] or [blank_start]unplanned disruption[blank_end] that happens to the active instance, the standby instance would take over (failover) automatically, and resume the S2S VPN or VNet-to-VNet connections.
- Aplanned maintenance
- Bunplanned disruption
23For [blank_start]P2S[blank_end] VPN client connections to the gateway, the [blank_start]P2S[blank_end] connections will be disconnected and the users will need to reconnect from the client machines.
- AP2S
- BP2S
Information
- Description
- Easy Azure AZ-104 tests Quiz on Ch5 Module 6 VPN Gateway, created by Archimed Nemes on 20/02/2022.
- Author
- Archimed Nemes
- Language
- English
- Views
- 1
- Tags
- Rating
- No ratings yet Rate this quiz