Help shape GoConqr. What should we add next?

Quiz

PDD Quiz II

a 20 questions

Take the quiz

This quiz has question types that open in the usual player.

Questions in this quiz (20)

  1. 1Which of the disaster (natural or man-made) below is less likely to contribute to the lateral loads on buildings?
    1. AEarthquakes
    2. BTornadoes
    3. CFloods
    4. DUnexpectedly heavy & continuing snow
    5. EErosion
    6. FBlasts
  2. 2Which one below is one of the common characteristics of brittle materials?
    1. ABrittle materials are strong in compression and weak in tension.
    2. BBrittle materials are strong in tension weak in compression.
    3. CBrittle materials have higher ultimate strain .
    4. DBrittle materials produce large deformations before failure.
  3. 3An architect is working on a new light-frame wood structure and discovers that the project site is susceptible to termite damage. Which of the following is the best strategy to prevent termite damage in wood members?
    1. AUse naturally decay-resistant or preservative-treated wood.
    2. BUse a termite shield.
    3. CProvide a soil barrier, that is, a chemical soil treatment.
    4. DMaintain distance between wood and ground.
  4. 4While reviewing the plan details of a wood-light frame house project, the architect makes sure that the corner details of exterior walls are the same or similar to the details shown above. Select the major reasons behind the traditional three-stud corner application at the exterior walls in wood light-frame structures. 𝑪𝒉𝒆𝒄𝒌 𝒕𝒉𝒆 𝒕𝒘𝒐 𝒕𝒉𝒂𝒕 𝒂𝒑𝒑𝒍𝒚.Image for question 4
    1. AIt is required to acquire minimum 1-hour fire rating at wood light frame construction.
    2. BThe corner of an exterior wall must be stronger than the field of the wall, requiring a minimum of three studs at the corner.
    3. CMinimum three studs can provide enough thickness at the exterior wall to meet minimum insulation requirements in most climates.
    4. DIt is required to obtain an adequate nailing surface for the interior gypsum board and exterior sheathing.
  5. 5Which type of steel joist is preferred more often than others?
    1. AK-series
    2. BLH-series
    3. CDLH-series
    4. DDH-series
  6. 6Drag and drop the given components of the schematic Stone Panel at Parapet detail across to the highlighted letters accordingly.Image for question 6
    1. ACoping stone
    2. BJoint sealant w/backer rod
    3. CStainless steel split anchor
    4. DSpray foam seal
    5. ESheathing
    6. FBoard Insulation
    7. GWeather Barrier
    8. HShelve angle
    9. ISteel stud header
    10. JRoofing membrane
  7. 7Which sprinkler system is more likely to be preferred in museums?
    1. ADeluge systems
    2. BWet-pipe systems
    3. CDry-pipe systems
    4. DPre-action systems
  8. 8What is the tensile stress in a suspension cable if the force applied on the cable is 3 kips, and the diameter of the cable is 0.5 in? (π =3.14)
    1. A3822 psi
    2. B6875 psi
    3. C12456 psi
    4. D15283 psi
  9. 9Knowing that the beam above is in static equilibrium and has a distributed load of 4 lb/ft, as shown, what is the value of the reaction force R2? (Ignore the own weight of the beam)Image for question 9
    1. A2 lb
    2. B3.3 lb
    3. C8 lb
    4. D10 lb
  10. 10Which of the following sealant has the highest movement capability?
    1. AButyl Caulk
    2. BSilicone
    3. CAcrylics
    4. DPolyurethane

Information

Description
ARCH PDD Quiz on PDD Quiz II, created by a a on 30/03/2024.
Author
a a
Language
English
Views
1
Tags
pddarch
Rating
No ratings yet
Rate this quiz
Rate this quiz

More on Building Structures and Structural Loads

Feedback

What is it about?

What should we add next?