Quiz
PDD Quiz XI
This quiz has question types that open in the usual player.
Questions in this quiz (20)
1Drag and drop the common truss variations across the highlighted letters accordingly. Not all of the items are represented in the given section diagram above. Drag and drop the irrelevant item across the letter โXโ.

- ADual Pitch
- BMono
- CVaulted Parallel Chord
- DHip
- ETribearing
- FScissors
2Which of the following mortar type is preferred where bond and lateral strengths are more important than high compressive strength?
- AType M
- BType S
- CType O
- DType N
3Select metals that have the risk of galvanic reaction to occur in between. ๐๐ต๐ฒ๐ฐ๐ธ ๐๐ต๐ฒ ๐๐ต๐ฟ๐ฒ๐ฒ ๐๐ต๐ฎ๐ ๐ฎ๐ฝ๐ฝ๐น๐.
- AAluminum โ Galvanized Steel
- BAluminum โ Copper
- CAluminum โ Zinc
- DCopper โ Zinc
- EAluminum โ Steel
- FLead โ Tin
4Based on the given elevation and specifications, select all master specification divisions that are related to this Locker Room. ๐๐ต๐ฒ๐ฐ๐ธ ๐๐ต๐ฒ ๐ณ๐ผ๐๐ฟ ๐๐ต๐ฎ๐ ๐ฎ๐ฝ๐ฝ๐น๐.

- ADivision 04
- BDivision 6
- CDivision 7
- DDivision 9
- EDivision 22
- FDivision 23
- GDivision 26
5An architect is designing an enclosed carport that will be located 6 feet away from the clientโs two-story, single-family house. What is the fire-resistance rating requirement of the carportโs exterior, non-load bearing walls that are built-in Type VB construction type?
https://codes.iccsafe.org/content/IBC2021P2- ANot Required
- B1/2 hour
- C1 hour
- D1 1/2 hours
6An architect receives a lumber sample for her new project and lumbers have the stamp given above. Which of the following mark on the stamp indicates the moisture content level of the lumber?

- AS-P-F
- BMLB
- CMC-15-HT
- D25 NLGA
7An architect receives final revision notes from the interior designer. As per revisions, one of the ceramic tile finishes used in locker rooms, CT-12, is revised to CT-4. Which of the following interior elevations has to be revised to reflect this revision? Refer to the enlarged room plan and enlarged finish plan of the locker room above.

- A11 / ID606
- B12 / ID606
- C13 / ID606
- D14 / ID606
- E15 / ID606
- F16 / ID606
8In multistory steel structures with more than three floors, column splices are usually provided at every?
- AOne Floor
- BTwo Floor
- CThree Floor
- DFour Floor
9Select the names of rectangular-shaped steel members made of molten steel. ๐๐ต๐ฒ๐ฐ๐ธ ๐๐ต๐ฒ ๐๐ต๐ฟ๐ฒ๐ฒ ๐๐ต๐ฎ๐ ๐ฎ๐ฝ๐ฝ๐น๐.
- ABillet
- BBloom
- CPlate
- DSlab
- ESlag
10How is the stucco finishโs scratch coat generally applied on the exterior wall surfaces?
- AHand applied followed by troweling.
- BAvailable in peel-and-stick sheets.
- CInstalled as prefabricated panels.
- DSpray-on-applied followed by troweling.
11Which nail type below is more likely to be used in scaffolding and concrete formwork?
- ACommon Nail
- BBox Nail
- CDuplex Nail
- DCasing Nail
12An architect is reviewing the structural drawings for an office project and notices that the steel I-beams are marked as W14 x 28. Which option below represents the correct numeral value of the wide flange steel sections?
- AThe nominal depth of the section is 14 inches, and the nominal weight of the section is 28 lb/ft.
- BThe nominal depth of the section is 14 inches, and the nominal length of the section is 28 inches.
- CThe nominal weight of the section is 14 lb/ft, and the nominal depth of the section is 28 inches.
- DThe nominal length of the section is 14 feet, and the nominal depth of the section is 28 inches.
13Which of the following option is the typically available means of joining galvanized steel pipes? ๐๐ต๐ฒ๐ฐ๐ธ ๐๐ต๐ฒ ๐๐ต๐ฟ๐ฒ๐ฒ ๐๐ต๐ฎ๐ ๐ฎ๐ฝ๐ฝ๐น๐.
- AThreaded connections
- BFlared fitting
- CCompression fitting
- DUnions
- ESlip couplings
- FSoldered fitting
14Which of the processing method is cheaper to manufacture aluminum section profiles compared to other techniques?
- AExtrusion
- BHot-rolling
- CCold-forming
- DMill finishing
15An owner wants to build a large building supplies store in Seattle, WA. Based on the Zoning Excerpt given below, what is the maximum size of this building can be?
(Refer to the materials tab above to access the Zoning Code)- A25,000 sf
- B35,000 sf
- C40,000 sf
- D45,000 sf
- E50,000 sf
16What is the main purpose of stirrups in concrete beam reinforcement?

- ACompression reinforcement
- BShear reinforcement
- CBuckling prevention
- DTensile strength
17What is the most commonly used ๐ฐ๐ผ๐๐ฒ๐ฟ ๐ฏ๐ผ๐ฎ๐ฟ๐ฑ with hot-applied membranes, such as built-up and modified bitumen membranes?
- AFiberglass-reinforced gypsum board
- BIso boards
- CPerlite board
- DXPS
18Select the correct statements regarding welding and bolting. ๐๐ต๐ฒ๐ฐ๐ธ ๐๐ต๐ฒ ๐ณ๐ผ๐๐ฟ ๐๐ต๐ฎ๐ ๐ฎ๐ฝ๐ฝ๐น๐
- AWelding has a much larger range of applicability than bolting
- BWelded connections can provide substantial savings of steel in some structures.
- CWelding requires a much greater level of skill than bolting.
- DBolting requires a much greater level of skill than welding.
- EWeather conditions have relatively less effect on bolting compared to welding.
- FGood bolting practice requires that the members to be bolted must be dry and free from dirt and grease.
19Which of the following is the main reason to use two pieces anchors in brick veneer wall applications?
- AThe veneer and the backup will usually expand or contract at different rates.
- BIt is customary to use two-piece anchors.
- CThere is no specific difference between using one or two-piece anchors.
- DTwo-piece anchors are usually stainless steel, which makes them more durable.
20Select all of the rainwater control strategies in a typical window detail. ๐๐ต๐ฒ๐ฐ๐ธ ๐๐ต๐ฒ ๐๐ต๐ฟ๐ฒ๐ฒ ๐๐ต๐ฎ๐ ๐ฎ๐ฝ๐ฝ๐น๐.
- AConcave brick veneer joint.
- BExtruded polystyrene insulation in the partition wall.
- CSloped sill
- DSealant and backer rod
- EDrip groove
- FAir Space
Information
- Description
- ARCH PDD Quiz on PDD Quiz XI, created by a a on 22/06/2024.
- Author
- a a
- Language
- English
- Views
- 6
- Tags
- Rating
- No ratings yet Rate this quiz
More on Construction Materials