5871957
Description
Quiz by Jonelle Natividad, updated more than 1 year ago
|
Created by Jonelle Natividad
almost 8 years ago
|
|
Question 1
Question
Considered as the graphic language of the engineers.
Answer
-
Power point presentation
-
Technical drawings & Specifications
-
Project Photographs
-
Visual Arts
Question 2
Question
Identify the figure shown below. It is a type of coupling with male thread on one side.
Answer
-
Extension Piece
-
Combination Nipple
-
Street Nipple
-
Street Piece
Question 3
Question
Which is the most important among the ff water supply fittings?
Answer
-
Elbow
-
Coupling
-
Tee
-
Bushing
Question 4
Question
An ordinary fitting having a back outlet (opposite to the branch). The axes of all the outlets lie in the same plane and are at right angle to each other.
Answer
-
Cross Fitting
-
Reared-Outlet Tee
-
Double Tee
-
Double Fitting
Question 5
Question
What is the purpose of a plug?
Answer
-
Closing pipe ends with male thread.
-
Closing pipe ends with no thread.
-
Closing pipe ends with female thread.
-
Closing pipe ends with burr.
Question 6
Question
It is a fitting that has a main function of connecting the male end of a pipe to a fitting of a larger size.
Answer
-
Bushing
-
Elbow
-
Tee
-
Crossed Fitting
Question 7
Question
It is a type of elbow with a third opening perpendicular to the plain of the run.
Answer
-
Side-outlet Elbow
-
Three-outlet Elbow
-
Branched Elbow
-
Special Elbow
Question 8
Answer
-
Union Elbow
-
Combined Elbow
-
Nut Elbow
-
Street Elbow
Question 9
Answer
-
Union Tee
-
Combined Tee
-
Nut Tee
-
Street Tee
Question 10
Question
Why are special fittings needed to connect iron and copper pipes?
Answer
-
To prevent galvanic current from being generated by the two dissimilar metals.
-
To prevent tuberculation in the two dissimilar metals.
-
To prevent corrosion between the two dissimilar metals.
-
To prevent abrasion between the two dissimilar metals.
Question 11
Question
What do you call the process in which the steel and wrought iron pipe rust?
Answer
-
Tuberculation
-
Corrosion
-
Oxidation
-
Decomposition
Question 12
Question
The minimum depth of pure lead in a caulked joint.
Answer
-
1"
-
1/2"
-
3/4"
-
1 1/2 "
Question 13
Question
Threaded pipe joint cement or mixture shall be used on ___.
Answer
-
Female thread only
-
Male thread only
-
Both
-
None
Question 14
Question
What is required for a soft copper water piping?
Answer
-
Flared joint
-
Soldered joint
-
Screwed joint
-
Brazed joint
Question 15
Question
How are asbestos cement sewer pipe made?
Answer
-
Shall be made with sleeve coupling with same material as the pipe.
-
Shall be made with resilient type material.
-
Shall be made with approved joint cement through proper application.
-
Shall be made using flared joint.
Question 16
Question
At what locations are traps required?
Answer
-
At every fixture with integral trap.
-
At every fixture with no integral trap.
-
At every appurtenance.
-
None of the above.
Question 17
Question
What is the relation of the trap and the drain size?
Answer
-
Traps shall be one size smaller than the fixture drain.
-
Traps shall be one size larger than the fixture drain.
-
Traps shall be of the same size as the fixture drain.
-
Traps shall be three sizes larger than the fixture drain.
Question 18
Question
Identify the figure shown. It is a type of bushing.
Answer
-
Hexagonal Bushing
-
Closed Bushing
-
Faced Bushing
-
Plane Bushing
Question 19
Question
What is a trap seal primer?
Answer
-
A device used to clean a trap.
-
A device used to maintain the trap seal.
-
A device used to drain a trap seal.
-
Plane Bushing
Want to create your own Quizzes for free with GoConqr? Learn more.