Quiz
ISTQB Dumps 01
This quiz has question types that open in the usual player.
Questions in this quiz (40)
1In which activity of the Fundamental Test Process is the test environment set up?
- ATest implementation and execution.
- BTest planning and control
- CTest analysis and design
- DEvaluating exit criteria and reporting
2Which of the following represents an INVALID transition (N)
- AOff from display Channel 1?
- BChannel 2 from Display Channel 1?
- CStby from Live?
- DChannel 2 from Live?
3Given the following decision table which of the following test cases and expected results is VALID?
- A23 year old in insurance class A
- B51 year old in insurance class C
- C31 year old in insurance class B
- D43 year old in insurance class C
4Which of the following are characteristic of test management tools?
a) They support traceability of tests to source documents.
b) They provide an interface to test execution tools.
c) They help to enforce coding standards.
d) They manipulate databases and files to set up test data.- Aa and c
- Bb and c
- Ca and b
- Db and d
5Which one of the following is a characteristic of good testing in any lifecycle model?
- AEach test level has the same test objective.
- BThere should be more testing activities than development activities
- CTest design can only begin when development is complete
- DTesters should begin to review documents as soon as drafts are available.
6What is the minimum number of test cases required for 100% statement coverage and 100%
decision coverage, respectively?
- AStatement Coverage = 1
- BStatement Coverage = 2
- CStatement Coverage = 3
7Which of the following are structure-based techniques?
a) Decision table testing
b) Boundary value analysis
c) Multiple condition coverage
d) Use case testing
e) Decision testing- Aa and c
- Bb and d
- Cb and e.
- Dc and e
8The digital ainbow Thermometer uses 7 colours to show the ambient temperature. Each colour
spans a range of just 5, with an operating minimum and maximum of minus 5 and 30. Which of
the following values is minimum and maximum of minus 5? and 30?. Which of the following
values is LEAST likely to have been identified when applying the boundary value test design
technique?- A3030?
- B00?
- C8?8
- D15 15?
9A system specification states that a particular field should accept alphabetical characters in either
upper or lower case. Which of the following test cases is from an INVALID equivalence partition?- AFeeds
- BF33ds
- CFEEDS
- DfEEDs
10Which of the following is an example of a product risk?
A. Software that does not perform its intended functions
B. Failure of a third party
C. Problems in defining the right requirements
D. Skill and staff shortages- ASkill and staff shortages
- BProblems in defining the right requirements
- CFailure of a third party
- DSoftware that does not perform its intended functions
11A system under development contains complex calculations and decision logic, and it is assessed
as high risk because of the relative inexperience of the development team in the application
domain. Which of the following would be the MOST appropriate choice of test design technique
for component testing?- ADecision testing.
- BStatement testing
- CState transition testing
- DEquivalence partitioning
12Which of the following statements are true in relation to component testing?
a) Stubs may be used.
b)May cover resource behaviour (e.g. memory leaks).
c) Tests the interactions between software components.
d) Defects are typically fixed without formally managing these defects.- Aa, c and d
- Ba, b and d
- Cb, c and d
- Da, b and c
13Which tasks would USUALLY be performed by a test leader and which by the tester?
A. c and d by the test leader; a and b by the tester
B. a and b by the test leader; c and d by the tester.
C. a and d by the test leader; b and c by the tester
D. a, c and d by the test leader; b by the tester.- Ac and d by the test leader; a and b by the tester
- Ba and b by the test leader; c and d by the tester.
- Ca and d by the test leader; b and c by the tester
- Da, c and d by the test leader; b by the tester
14Pair the correct test design techniques (i to v) with the category of techniques (x, y and z):
i)Exploratory Testing
ii)Equivalence Partitioning
iii)Decision Testing
iv)Use Case Testing
v)Condition coverage
x) Specification-based
y)Structure-based
z)Experienced-based- Ax = i and ii; y = iii and v; z = iv.
- Bx = i, ii and iv; y = v; z = iii
- Cx = ii and iv; y = iii and v; z = i.
- Dx = iii and iv; y = v; z = i and ii.
15Which of the following activities should be performed during the selection and implementation of a
testing tool?
a) Determine whether the organisation existing test process needs to change.
b) Conduct a proof of concept.
c) Implement the selected tool on a project behind schedule to save time.
d) Identify coaching and mentoring requirements for the use of the selected tool- Aa, b and c.
- Bb, c and d.
- Ca, c and d.
- Da, b and d
16Which one of the following is true of software development models?
- AThere are always four test levels in the V-model
- BIn a Rapid Application Development (RAD) project, there are four test levels for each iteration.
- CIn Agile development models, the number of test levels for an iteration can vary depending on
the project. - DThere must be at least four test levels for any software development model.
17Four testers have each submitted an incident report in which each reported a problem with the
User log-on process. User log-on is a critical component of the system. The table below
describes the four defect reports submitted.
- ATester 3
- BTester 1
- CTester 2
- DTester 4
18Which of the following is a purpose of the review kick off activity?
- AExplain the objectives
- BSelect the personnel group
- CDocument results
- DDefine entry and exit criteria
19Which statement about combinations of inputs and preconditions is true for a large system?
- AIt is easy to test them all in a short time
- BIt is not practically possible to test them all
- CIt is not possible to test any of them
- DIt is essential to test them all in order to do good testing
20Which of the following is a MAJOR task of evaluating exit criteria and reporting?
- AWriting a test summary report for stakeholders
- BLogging the outcome of test execution
- CRepeating test activities as a result of action taken for each discrepancy.
- DEvaluating testability of the requirements and system
21Which statement BEST describes the role of testing?
- ATesting ensures that the right version of code is delivered
- BTesting can be used to assess quality.
- CTesting shows that the software is error free.
- DTesting improves quality in itself.
22Under what circumstances would you plan to perform maintenance testing?
- AAs part of a migration of an application from one platform to another.
- BAs part of a planned enhancement release.
- CWhen the test scripts need to be updated.
- DFor data migration associated with the retirement of a system
23Given the following sample of pseudo code:
01 Input number of male rabbits 02 Input number of female rabbits 03 If male rabbits > 0 and
female rabbits > 0 then 04 Input Do you want to breed (Yes / No) 05 If breed = o?05 If breed =
?o 06 Print deep male and female rabbits apart!?06 Print deep male and female rabbits apart! 07
End if 08 End If.
Which of the following test cases will ensure that statement ?6?is executed?- Amale rabbits = 1, female rabbits = 1, breed = Yes male rabbits = 1, female rabbits = 1, breed =
Yes? - Bmale rabbits = 1, female rabbits = 1, breed = No male rabbits = 1, female rabbits = 1, breed =
No? - Cmale rabbits = 1, female rabbits = 2, breed = Yes male rabbits = 1, female rabbits = 2, breed =
Yes? - Dmale rabbits = 1, female rabbits = 0, breed = No male rabbits = 1, female rabbits = 0, breed =
No?
- Amale rabbits = 1, female rabbits = 1, breed = Yes male rabbits = 1, female rabbits = 1, breed =
24Which of the following is a standard for test documentation?
- AIEEE Std. 1028
- BEEE Std. 1044
- CISO 9126.
- DIEEE Std. 82
25Which of the following statements describe why experience-based test design techniques are
- AThey can help derive test cases based on analysis of specification documents.
- BThey can identify tests not easily captured by formal techniques.
- CThey make good use of tester knowledge, intuition and experience.
- DThey are an effective alternative to formal test design techniques.
26Which of the following is a specification-based technique?
- AUse Case Testing
- BError Guessing.
- CCondition coverage
- DStatement Testing.
27Which of the following is LEAST likely to be included in an incident report?
- ASuggestions for correcting the problem
- BDegree of impact on stakeholder interests.
- CDate the incident was discovered.
- DLife cycle process in which the incident was discovered
28Which of the following activities would improve how a tool is deployed within an organisation?
- ADefining best practice guidelines for users.
- BRoll out the tool across the organisation as quickly as possible to all users.
- CProvide technical support to the test team for each type of tool.
- DIntroduce a system to monitor tool usage and user feedback.
- EEnsure that the test process is not changed as result of the tool introduction.
29Which of the following types of defect are typically found in reviews rather than in dynamic testing?
- ADeviations from standards.
- BDefects in interface implementation.
- CPoor maintainability of code.
- DPoor performance of the system.
- EDefects in requirements.
30During which activity of the Fundamental Test Process test process do you review the test basis?
- AEvaluating exit criteria and reporting.
- BTest implementation and execution
- CTest analysis and design
- DTest planning and control
31How is the scope of maintenance testing assessed?
- AScope is related to the risk, size of the changes and size of the system under test
- BScope is defined by the size and type of system being changed
- CScope is related to the number of system users affected by the change.
32Which of the following BEST describes a data-driven approach to the use of test execution tools?
- AMonitoring response times when the system contains a specified amount of data
- BManipulation of databases and files to create test data
- CUsing a generic script that reads test input data from a file
- DRecording test scripts and playing them back
33From a Testing perspective, what are the MAIN purposes of Configuration Management?
- AIdentifying the version of software under test.
- BControlling the version of testware items.
- CDeveloping new testware items.
- DTracking changes to testware items.
- EAnalysing the need for new testware items.
34What is the USUAL sequence for performing the following activities during the Fundamental Test
Process?
a) Analyse the test basis documents.
b) Define the expected results.
c) Create the test execution schedule.
d) Establish the traceability of the test conditions- Ad, a, c, b
- Ba, d, b, c
- Ca, b, c, d
- Da, b, d, c
35Which of the following statements is true?
- ATesting cannot prove that software is incorrect.
- BTesting can prove that software is either correct or incorrect.
- CTesting cannot prove that software is correct.
- DTesting can prove that software is correct.
36Which ADDITIONAL test level could be introduced into a standard V-model after system testing?
- ASystem Integration Testing
- BAcceptance Testing
- CRegression Testing
- DComponent Integration Testing
37The above table shows 6 test procedures (P to U) that must now be entered into a test execution
schedule. Business severity is regarded as the most important element in determining the
sequence of the test procedures, but other dependencies must also be taken into consideration.
Regression testing can only be run once all other tests have completed.
Which of the following represents the MOST effective sequence for the test execution schedule
(where the first entry in the sequence is the first procedure to be run, the second entry is the
second to be run and so on)?
- AQ, P, S, R, U, T.
- BR, S, U, P, Q, T
- CR, P, S, U, T, Q
- DP, Q, R, S, U, T
38Which of the following are the typical defects found by static analysis tools?
- Aa) Variables that are never used.
- Bb) Security vulnerabilities.
- Cc) Poor performance.
- Dd) Unreachable code.
- Ee) Business processes not followed.
39Which ordering of the list below gives increasing levels of test independence?
a) Tests designed by a fellow-member of the design team.
b) Tests designed by a different group within the organisation.
c) Tests designed by the code author.
d) Tests designed by different organisation.- Ac, a, b, d.
- Bd, b, a, c
- Cc, a, d, b.
- Da, c, d, b
40Which of the following is a review process activity?
- AIndividual preparation
- BWriting test conditions
- CDeveloping a test plan
- DExecuting test scripts
Information
- Description
- Quiz on ISTQB Dumps 01, created by Bridget Jones on 19/10/2016.
- Author
- Bridget Jones
- Language
- English
- Views
- 7
- History
- Created on 19 Oct 2016 · updated on 2 Nov 2016
- Tags
- Rating
- No ratings yet Rate this quiz