Quiz
Interconnected networks and routing.
This quiz has question types that open in the usual player.
Questions in this quiz (12)
1In [blank_start]packet switched[blank_end] networks, sometimes the physical and [blank_start]logical[blank_end] topologies may differ, for example, gigabit ethernet is connected in a [blank_start]star[blank_end] to a [blank_start]hub[blank_end]/switch but is logically a [blank_start]bus[blank_end] or ring.
- Apacket switched
- Blogical
- Cstar
- Dhub
- Ebus
2They key difference between hubs and switches is that hubs work at layer [blank_start]1[blank_end] and they repeat [blank_start]all[blank_end] packets to [blank_start]all[blank_end] ports. Switches work at layer [blank_start]2[blank_end] and learn the [blank_start]MAC[blank_end] addresses associated with each port and [blank_start]drops packets[blank_end] not intended for them.
- A1
- Ball
- Call
- D2
- EMAC
- Fdrops packets
3Switching is strictly a layer [blank_start]2[blank_end] activity, but we often want to explicitly decide where packets should go based on [blank_start]logical[blank_end] (IP) addresses. To do this, a device called a [blank_start]router[blank_end] is inserted between the two separate networks.
- A2
- Blogical
- Crouter
4The router is [blank_start]physically[blank_end] connected to both networks.
- Aphysically
5A router has a separate [blank_start]IP[blank_end] address on each [blank_start]network[blank_end] that it's connected to.
- AIP
- Bnetwork
6The [blank_start]subnet[blank_end] mask is a way of saying how many bits of an IP address refer to computers inside the local network. Any bit that's [blank_start]1[blank_end] means that its corresponding bit identifies the network.
- Asubnet
- B1
7Class A subnet mask: [blank_start]255.0.0.0[blank_end]
- A255.0.0.0
8Class B subnet mask: [blank_start]255.255.0.0[blank_end]
- A255.255.0.0
9Class C subnet mask: [blank_start]255.255.255.0[blank_end]
- A255.255.255.0
10The first step of the routing process involves checking if the destination IP is [blank_start]local[blank_end]. If it is local, [blank_start]ARP[blank_end] is carried out as normal.
- Alocal
- BARP
11The [blank_start]routing table[blank_end] is checked to see if there is a specific [blank_start]gateway[blank_end] destination for the destination IP.
- Arouting table
- Bgateway
12If there's no match, the packet is forwarded to the [blank_start]router's IP[blank_end], often called the [blank_start]default gateway[blank_end].
- Arouter's IP
- Bdefault gateway
Information
- Description
- Quizzes knowledge of interconnected networks and routing.
- Author
- Kerrie Callaghan
- Language
- English
- Views
- 37
- Tags
- Rating
- No ratings yet Rate this quiz
More on Network Devices and Routing