Help shape GoConqr. What should we add next?

Quiz

Mechanisms Test

Nuño Nieto 20 questions Updated 6 Nov 2021

Take the quiz

This quiz has question types that open in the usual player.

Questions in this quiz (20)

  1. 1Which of the following definitions corresponds with the meaning of the first movement?
    1. ADiffers from 1 in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed. By arranging three pulleys...
    2. BA method of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are two of these pulleys, side by side, one for each leaf of the belt.
    3. CIllustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys rotate in the same direction.
  2. 2Prove if this is true or false: By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.Image for question 2
    1. ATrue
    2. BFalse
  3. 3The right photo to this question is: a means of converting rotary motion, by which the speed is made uniform during a part, and varied during another part, of the revolution.
    1. AImage for option A
    2. BImage for option B
  4. 4Chose the correct answer for the 55 movement:
    1. ADifferent velocity given to two gears, A and C, on the same shaft, by the pinion, B.

      Notes:
      Brown originally referred to the pinion D, but there is no D in the original illustration. We have corrected it to B.
    2. BThe single tooth, A, of the driving-wheel, B, acts in the notches of the wheel, C, and turns the latter the distance of one notch in every revolution of C...
  5. 5True or false: the 69 movement is
    1. AImage for option A
    2. BImage for option B
  6. 6The movement of the movement 97 is:
    1. AThis is a heart-cam, similar to 96, except that it is grooved.
    2. BOnly similar to 96
    3. CNot similiar to 96 movement
  7. 7Which of the following definitions are 99,97 movements
    1. AThis is a heart-cam, similar to 96, except that it is grooved.
    2. BSpiral guide attached to the face of a disk; used for the feed-motion of a drilling machine.
    3. CQuick return crank motion, applicable to shaping machines.
  8. 8Correct the definition of the 100 movement: Quick [blank_start]return[blank_end] crank motion, applicable to shaping [blank_start]machines[blank_end].
    1. Amachines
    2. Breturn
  9. 9The right image and definition is:
    1. ABy giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.Image for option A
    2. BResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.Image for option B
    3. CResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.Image for option C
  10. 10The right photo and definition of the 94 movement is:
    1. AA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.Image for option A
    2. BOrdinary crank motion.Image for option B
    3. CA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.Image for option C
    4. DVariable crank, two circular plates revolving on the same center. In one a spiral groove is cut; in the other a series of slots radiating from the center. On turning one of these plates around its center, the bolt shown near the bottom of the figure, and which passes through the spiral groove and radial slots, is caused to move toward or from the center of the plates.Image for option D

Information

Description
Quiz on Mechanisms Test, created by Nuño Nieto on 03/11/2021.
Language
Español
Views
2
History
Created on 3 Nov 2021 · updated on 6 Nov 2021
Rating
No ratings yet
Rate this quiz
Rate this quiz

More on Motion Transmission and Transformation

Feedback

What is it about?

What should we add next?