Quiz
Mechanisms Test
This quiz has question types that open in the usual player.
Questions in this quiz (20)
1Which of the following definitions corresponds with the meaning of the first movement?
- ADiffers from 1 in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed. By arranging three pulleys...
- BA method of transmitting motion from a shaft at right angles to another, by means of guide-pulleys. There are two of these pulleys, side by side, one for each leaf of the belt.
- CIllustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys rotate in the same direction.
2Prove if this is true or false: By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

- ATrue
- BFalse
3The right photo to this question is: a means of converting rotary motion, by which the speed is made uniform during a part, and varied during another part, of the revolution.
- A

- B

- A
4Chose the correct answer for the 55 movement:
- ADifferent velocity given to two gears, A and C, on the same shaft, by the pinion, B.
Notes:
Brown originally referred to the pinion D, but there is no D in the original illustration. We have corrected it to B. - BThe single tooth, A, of the driving-wheel, B, acts in the notches of the wheel, C, and turns the latter the distance of one notch in every revolution of C...
- ADifferent velocity given to two gears, A and C, on the same shaft, by the pinion, B.
5True or false: the 69 movement is
- A

- B

- A
6The movement of the movement 97 is:
- AThis is a heart-cam, similar to 96, except that it is grooved.
- BOnly similar to 96
- CNot similiar to 96 movement
7Which of the following definitions are 99,97 movements
- AThis is a heart-cam, similar to 96, except that it is grooved.
- BSpiral guide attached to the face of a disk; used for the feed-motion of a drilling machine.
- CQuick return crank motion, applicable to shaping machines.
8Correct the definition of the 100 movement: Quick [blank_start]return[blank_end] crank motion, applicable to shaping [blank_start]machines[blank_end].
- Amachines
- Breturn
9The right image and definition is:
- ABy giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.

- BResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.

- CResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.

- ABy giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.
10The right photo and definition of the 94 movement is:
- AA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.

- BOrdinary crank motion.

- CA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.

- DVariable crank, two circular plates revolving on the same center. In one a spiral groove is cut; in the other a series of slots radiating from the center. On turning one of these plates around its center, the bolt shown near the bottom of the figure, and which passes through the spiral groove and radial slots, is caused to move toward or from the center of the plates.

- AA uniform intermittent rotary motion in opposite directions is given to the bevel-gears, A and B, by means of the mutilated bevel-gear, C.
11True or false: the first movement is: Illustrates the transmission of power by simple pulleys and an open belt. In this case both of the pulleys rotate in the same direction.
- ATrue
- BFalse
12The 99 movement is: Spiral [blank_start]guide[blank_end] attached to the face of a [blank_start]disk[blank_end]; used for the feed-motion of a [blank_start]drilling[blank_end] machine.
- Aguide
- Bdrilling
- Cdisk
13Which foto is the 6 movement?
- A

- B

- A
14Which of the fotos correspond to the 115 and 2 movement?
- A

- B

- C

- D

- A
15The definition of the 118 movement is: Rotary motion of the toothed wheels produces rectilinear motion of the double rack and gives equal force and velocity to each side, both wheels being of equal size.
- ATrue
- BFalse
16Chose the definition of the 68 movement
- ARotary motion of the toothed wheels produces rectilinear motion of the double rack and gives equal force and velocity to each side, both wheels being of equal size.
- BA mode of doubling the length of stroke of a piston-rod, or the throw of a crank. A pinion revolving on a spindle attached to the connecting-rod or pitman is in gear with a fixed rack. Another rack carried by a guide-rod above, and in gear with the opposite side of the pinion, is free to traverse backward and forward. Now, as the connecting-rod communicates to the pinion the full length of stroke, it would cause the top rack to traverse the same distance, if the bottom rack was alike movable; but as the latter is fixed, the pinion is made to rotate, and consequently the top rack travels double the distance.
- CThe single tooth, A, of the driving-wheel, B, acts in the notches of the wheel, C, and turns the latter the distance of one notch in every revolution of C. No stop is necessary in this movement, as the driving-wheel, B, serves as a lock by fitting into the hollows cut in the circumference of the wheel, C, between its notches.
- D55. Different velocity given to two gears, A and C, on the same shaft, by the pinion, B.
Notes:
Brown originally referred to the pinion D, but there is no D in the original illustration. We have corrected it to B.
17The photo of the 20 movement is:
- A

- B

- A
18Is this the definition of the 101 movement?
Rectilinear motion of horizontal bar, by means of vibrating slotted bar hung from the top.- ATrue
- BFalse
19The right definition for the 5 movement is:
- ARectilinear motion of horizontal bar, by means of vibrating slotted bar hung from the top.
- BRotary motion of the toothed wheels produces rectilinear motion of the double rack and gives equal force and velocity to each side, both wheels being of equal size.
- CResembles 1, with the addition of a movable tightening pulley, B. When this pulley is pressed against the band to take up the slack, the belt transmits motion from one of the larger pulleys to the other; but when it is not, the belt is so slack as not to transmit motion.
- DBy giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.
20Is right the definition 6: By giving a vibratory motion to the lever secured to the semi-circular segment, the belt attached to the said segment imparts a reciprocating rotary motion to the two pulleys below.
- ATrue
- BFalse
Information
- Description
- Quiz on Mechanisms Test, created by Nuño Nieto on 03/11/2021.
- Author
- Nuño Nieto
- Language
- Español
- Views
- 2
- History
- Created on 3 Nov 2021 · updated on 6 Nov 2021
- Rating
- No ratings yet Rate this quiz
More on Motion Transmission and Transformation