GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Kostenlos registrieren

Quiz

NCC Vol 1 – Section A QUIZ #3: FRLs

ian_watts 10 Fragen

Quiz starten

Fragen in diesem Quiz (10)

  1. 1How are FRLs determined?
    1. AIt is identical with a prototype that has been submitted to the Standard Fire Test and has become certified.
    2. BIt differs in only a minor degree from a prototype tested by the Standard Fire Test and has become certified.
    3. CIt is designed to achieve the FRL according to the appropriate AS (depending on the material).
    4. DAny of the above.
  2. 2If the fire-resisting covering of a steel column is lightweight construction, the construction must do what?
    1. AComply with requirements from Section C.
    2. BHave materials of a high FRL covering it.
    3. CBe surrounded by masonry.
    4. DComply with requirements from Section F
  3. 3If a non-loadbearing element is able to be used for a purpose where the Deemed-to-Satisfy Provisions prescribe an FRL, what does this mean for the non-loadbearing element?
    1. AIt doesn't need to comply with the structural adequacy criterion.
    2. BIt doesn't need to comply with the integrity criterion.
    3. CIt doesn't need to comply with the insulation criterion.
    4. DIt doesn't need to comply with any of these criteria.
  4. 4Which of the following criteria do fire-resisting levels (FRLs) grade?
    1. AStructural adequacy
    2. BIntegrity
    3. CInsulation
    4. DCladding
  5. 5What does FRL stand for?
    1. AFire-rating level
    2. BFire-resistance level
    3. CFire-response level
    4. DFire-requirement level
  6. 6Given the following FRL, 90/90/90; what does each 90 mean?
    1. A90 minutes
    2. B90 joules
    3. C90 newtons
    4. D90%
  7. 7Given the following FRL, 240/240/240; what criteria does the first '240' stand for?
    1. AStructural adequacy
    2. BIntegrity
    3. CInsulation
    4. DCladding
  8. 8Given the following FRL, 180/180/180; what is the correct order for the criteria?
    1. AIntegrity/Structural Adequacy/Insulation
    2. BStructural Adequacy/Insulation/Integrity
    3. CStructural Adequacy/Integrity/Insulation
    4. DInsulation/Integrity/Structural Adequacy
  9. 9Given the following FRL, 120/–/–; what do the dashes stand mean?
    1. AThere is no requirement for this criterion.
    2. BThe requirement has not been set for this criterion.
    3. CDashed criterions are the same as the number before it.
    4. DIt requires the highest possible level for that criterion.
  10. 10Given the following FRL, 120/120/120; what criteria does the third '120' stand for?
    1. AStructural adequacy
    2. BIntegrity
    3. CInsulation
    4. DCladding

Informationen

Beschreibung
Test on FRLs, outlined in Section A of Volume 1 of the National Construction Code (Australia). [Taken from 2012 edition of the NCC]
Sprache
English
Aufrufe
239
Bewertung
Noch keine Bewertungen
Bewerte dieses Quiz
Bewerte dieses Quiz

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck