GoConqr hat ein neues Design! Sag uns, wie es dir gefällt.

Karteikarten

Week 1 LNS

R S C Solid State Year 4 Englisch 21 Karten

State the relation for the interplanar spacings between hkl planes in a cubic crystal

Karten in diesem Stapel (21)

  1. 1Define Periodic CrystalsOrdered arrangement of atoms or molecules that extends
    periodically in all three spatial directions
  2. 2Define; Translational Symmetry Crystal Lattice Crystal BasisTS; certain discrete translations leaving structure unchanged
    CL: set of translations that leave structure unchanged
    CB: Set of atoms attached to each lattice point
  3. 3State the relation for the interplanar spacings between hkl planes in a cubic crystalState the relation for the interplanar spacings between hkl planes in a cubic crystal
  4. 4State the following relations; Rec space translation vector General interplanar spacingState the following relations; Rec space translation vector General interplanar spacing
  5. 5Define normal stress and strainStress; Internal force per unit area of a body when deforming force is normal to surface of the body
    Strain; measure relative perpendicular movement of one reference plane wrt to another. It measures stretching or compressing from an applied load.
    Define normal stress and strain
  6. 6Define and state volumetric strainthe change in volume divided by the original volumeDefine and state volumetric strain
  7. 7State and define Poissons ratiothe ratio of the proportional decrease in a lateral measurement to the proportional increase in length in a sample of material that is elastically stretched. A value of 0.5 preserves the volume.State and define Poissons ratio
  8. 8Define and state Shear stress and strainStress; component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section.
    Strain; Shear strain is the deformation of an object caused by shear stress. Shear strain is the ratio of displacement to an object’s original dimensions due to stress, and is the amount of deformation perpendicular to a given line rather than parallel to it.
    Define and state Shear stress and strain
  9. 9State and define the following; Youngs Modulus Bulk Modulus Shear Modulus Hookes Law (in terms of modulus)Young
    a measure of elasticity, equal to the ratio of the stress acting on a substance to the strain produced.
    Bulk
    the relative change in the volume of a body produced by a unit compressive or tensile stress acting uniformly over its surface.
    Shear M
    a measure of the elastic shear stiffness of a material and is defined as the ratio of shear stress to the shear strain
    Hookes
    define modulus of elasticity as ration of stress, strain of the material. Thus, the modulus of elasticity of a material is defined as the slope of the stress-strain curve in the elastic deformation region. Therefore, Hooke's law defines modulus of elasticity.
    State and define the following; Youngs Modulus Bulk Modulus Shear Modulus Hookes Law (in terms of modulus)
  10. 10For the deformation of a unit cube to a parallelepiped, state the new positions (prime) in terms of the strain coefficientsFor the deformation of a unit cube to a parallelepiped, state the new positions (prime) in terms of the strain coefficients
  11. 11From a simple displacement, derive the general deformation formulaFrom a simple displacement, derive the general deformation formula
  12. 12For a deformation along x, derive the linear strain relation and state the local strain relation (YB)For a deformation along x, derive the linear strain relation and state the local strain relation (YB)
  13. 13state the relations for the strain coefficients in terms of the general displacementsstate the relations for the strain coefficients in terms of the general displacements
  14. 14State the shear strains in terms of u, v, wState the shear strains in terms of u, v, w
  15. 15State the infinitesimal strains for the Cauchy system and the 3 x 3 matrixState the infinitesimal strains for the Cauchy system and the 3 x 3 matrix
  16. 16State the 6 stress components in terms of the elastic stiffness constants and strainsState the 6 stress components in terms of the elastic stiffness constants and strains
  17. 17State the 6 strain relations for Hookes law in reverse in terms of the elastic compliance constantsState the 6 strain relations for Hookes law in reverse in terms of the elastic compliance constants
  18. 18Describe tensors and state the 3x3 tensor matrix State the summation form of the stress tensor matrix How many components does the c have?Describe tensors and state the 3x3 tensor matrix State the summation form of the stress tensor matrix How many components does the c have?
  19. 19Define Dielectric Polarisation State the relation for P and the matrix form, and its component equationWhen an electric field is applied to a capacitor, the dielectric material (or electric insulator) become polarized, such that the negative charges in the material orient themselves toward the positive electrode and the positive charges shift toward the negative electrodeDefine Dielectric Polarisation State the relation for P and the matrix form, and its component equation
  20. 20Define and state elastic energy density of a solid. State the relation for force and energy and spring constant Derive stress Xx in terms of a summation and beta, do the same for YyThe elastic energy density is defined as the potential energy. stored in a body per unit volume.Define and state elastic energy density of a solid. State the relation for force and energy and spring constant Derive stress Xx in terms...
  21. 21State the stiffness constants matrix equation for cubic crystals State any assumptionsState the stiffness constants matrix equation for cubic crystals State any assumptions

Informationen

Beschreibung
Year 4 Solid State Karteikarten am Week 1 LNS, erstellt von R S C am 18/06/2024.
Erstellt von
R S C
Aufrufe
1
Bewertung

Mehr zu Crystal Structures and Bonding

Feedback

Worum geht es?

Wie gefällt dir das neue Design?

Dein Eindruck