Chapter 7: IP Addressing

Chapter 7: IP Addressing

1. JUAN DAVID VARGAS PERDOMO

   • 9013113577

2. Network addresses Ipv4.

   • Binary and decimal conversion.
     • Ipv4 addresses.
       • Each address consists of a 32-bit string,
       • Each octet contains 8 bits (or 1 byte) separated by a period
     • Position notation
       • base
       • number pisition.
       • calculation
       • position value.
     • Conversion of binary system to decimal.
       • To convert a binary IPv4 address to its dotted decimal equivalent, divide the IPv4 address into four 8-bit octets
     • Conversion from decimal to binary system.
   • Structure of the Ipv4 address.
     • network positions.
     • the subnet mask
       • it is used to identify the network / host portion of the IPv4 address.
     • Logical AND
     • the length of the prefix.
     • Network, host and disulfion addresses.
       • The host portion, consists of only zeros.
       • The host portion, always contains numbers of zeros and some combined.
       • The unidifusipon uses the highest address in the range of the network.
   • Ipv4 Unicast, broadcast and multicast addresses.
     • Assigning a static IPv4 address to a host.
     • Assigning a dynamic IPv4 address to a host
     • Comunicación IPv4
       • Unicast
       • Broadcasting
       • Multicast
     • Transmisión de unidifusión
       • is used for normal communication from host to host
     • Broadcast transmission
       • is used to send packets to all hosts on the network with the broadcast address for the network
     • Multicast transmission
       • reduces traffic by allowing a host to send a single packet to a selected group of hosts that are subscribed to a multicast group.
   • Types of IPv4 addresses.
     • Public and private IPv4 addresses
       • Public IPv4 addresses
         • are addresses that are routed globally between ISP routers.
           • private address blocks.
       • private IPv4 addresses
         • Private addresses are defined in RFC 1918.
           • an not be routed on the Internet
     • IPv4 addresses of special users
       • Loopback addresses (127.0.0.0 / 8 or 127.0.0.1 to 127.255.255.254):
       • TEST-NET addresses (192.0.2.0 / 24 or 192.0.2.0 to 192.0.2.255):
       • Local link addresses (169.254.0.0 / 16 or 169.254.0.1 to 169.254.255.254):

3. Ipv6 network addresses.

   • problems with ipv4.
     • El agotamiento del espacio de direcciones IPv4 fue el factor que motivó la migración a IPv6.
     • Coexistence of IPv4 and IPv6
       • Dual-stack
       • Tunneling
       • Translation
   • ipv6 address.
     • Representation of IPv6 addresses
       • Preferred format
       • Rule 1: omit the initial 0
         • 01AB can be represented as 1AB.
         • 09F0 can be represented as 9F0.
         • 0A00 can be represented as A00.
         • 00AB can be represented as AB.
       • Rule 2: omit the segments of 0
         • 2001: 0DB8 :: ABCD: 0000: 0000: 1234
         • 2001: 0DB8 :: ABCD: 0000: 0000: 0000: 1234
         • 2001: 0DB8: 0000: ABCD :: 1234
         • 2001: 0DB8: 0000: 0000: ABCD :: 1234
   • types of ipv6 addresses.
     • Unicast
     • Multicast
     • Proximity diffusion
     • IPv6 prefix length
     • IPv6 unicast addresses
       • Global Unicast
       • Link-local
       • Unique place
     • IPv6 unicast addresses link-local
       • allows a device to communicate with other devices with IPv6 enabled on the same link and only on that link (subnet).
   • address of ipv6 unidifusion
     • Structure of a global unicast IPv6 address
       • Global routing prefix
       • Subnet ID
       • Interface ID
     • Static configuration of a global unicast address
       • Router configuration
       • Host configuration
     • Dynamic configuration: SLAAC
       • Network prefix and prefix length
       • Default gateway address
       • DNS addresses and domain name
       • Option 1 of RA: SLAAC
         • Prefix
         • Interface ID:
     • Dynamic configuration: DHCPv6
       • Option 2 of RA: SLAAC and DHCPv6 without status information
       • RA Option 3: DHCPv6 with status information
   • ipv6 multicast address
     • IPv6 multicast addresses assigned
       • Multicast group FF02 :: 1 for all nodes:
       • Multicast group FF02 :: 2 for all nodes

4. Verification of connectivity.

   • ICMP
     • ICMPv4 and ICMPv6
       • Host confirmation
       • Destination or inaccessible service
       • Time exceeded
     • ICMPv6 router request and announcement messages
       • Address resolution
       • Detection of duplicate addresses
   • Test and verification
     • Ping: Test the local stack
       • Ping the local loopback
     • Ping: Test connectivity to the local LAN
       • this is done by pinging the IP address of the host gateway.
     • Ping: Test connectivity to a remote network
       • The local host can ping an operational IPv4 host from a remote network
     • Traceroute: Test of the route
       • Round trip time (RTT)
       • IPv4 TTL and IPv6 hop limit

5. conclusion

   • IP addresses are hierarchical and have network, subnet and host portions. An IP address can represent a complete network, a specific host or the broadcast address of the network

6. It allows data communication between hosts, regardless of whether they are in the same network or in different networks

Bilder und Dateien der Mindmap