Quiz
Mechanical Testing
Create a free account to finish this quiz
Save your progress and see your final score.
Already have an account? Sign in
Questions in this quiz (12)
1Stress at which "permanent set"is 1st recorded, when bar is unloaded is known as:
- APermanent Set
- BStrain
- CElastic limit
- DProportional unit
2Tensile tests use special machines to exert force. Two general types that provide the force:
- AHydraulic / Mechanical
- BPull and Push
- CHydraulic Pull and Push
3Rockwell C used which major load?
- A130 kg
- B100 kg
- C140 kg
- D150 kg
4Thickness when making hardness should be
- A8x depth of impression
- B5x depth of impression
- C15x depth of impression
- D10x depth of impression
5What is Approx. diameter for tensile specimen used for All-Weld metal tests?
- A20 mm
- B1 in
- C5 mm
- D10 mm
- E3.8 in.
6High hardness value related to:
- Ahigh strength / low ductility
- Bhigh percentage of alpha ferrite constituent
- Clow strength / high ductility
- Dhigh strength / high ductility
- Eincreased degree of weldability
7NDTT determined from drop weight refers to
- Alowest temp. which Xtl fracture surface is observed
- BCharpy transition temperature
- Cmin. temp. which specimen breaks
- Dupper shelf
- Emax. temp. at which specimen breaks
830m long cable with strain of 0.25%
- A150 mm
- B6 mm
- C75 mm
- D1 m
- E7.5 m
9Impact test measures
- AHardness of material
- BUTS of material
- CAbility of material to stop energy
- DEnergy reqd to break specimen
- ELoad reqd to break specimen
10Guided root bend test on weld best reveals
- Aweld ductility by measuring difference in distance between gauge marks
- Bexcessive reinforcement
- Cintegrity of face weld
- Dlack of penetration of fusion
- EHAZ Properties
11Charpy test values
- AAre a measure of ductility
- BAre a measure of tensile strength
- CCan be applied directly to real structure
- DUsed for qualification and quality control checks
- EProvide same results as drop weight tests
12Conducting a tensile test, rate of loading up to the yield point is limited to some value, why?
- Afast load rate might increase yield stress
- Bfast load rate might lower the UTS
- Cprevent the specimen breaking before reaching UTS
- Dallow time for reading to be taken
- Eallow time for hydrogen removal
Information
- Description
- CWB Level 2 (Flash Cards / Quizes) Quiz on Mechanical Testing, created by Grant Aden on 12/07/2015.
- Author
- Grant Aden
- Language
- English
- Views
- 7
- Tags
- Rating
- No ratings yet Rate this quiz