Quiz
PHYSEC Quiz
Questions in this quiz (79)
1The two primary purposes of physical security are protection and _______________?
- ASecurity-in-depth
- BPrevention
- CPoint security
- DArea security
2A guard checking IDs at the gate of an installation is a good example of what type of security?
- ASecurity-in-depth
- BPrevention
- CPoint security
- DArea security
3___________ is the layering of physical security countermeasures such as fencing, guards, cameras, lighting, and locks.
- ASecurity-in-depth
- BPrevention
- CPoint security
- DArea security
4Before you can conduct a risk analysis based on the impact and likelihood of an unwanted event happening, what steps in the risk management process must you take first?
- AIdentify assets
- BIdentify threats
- CDetermine countermeasure options
- DIdentify vulnerabilities
- EMake risk management decisions
5Which policy guidance would you consult to find the minimum standards for the physical protection of DoD assets?
- ADoD 5200.08-R, Physical Security Program
- BDoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
- CDoDM 5200.01, Volumes 1-4 DoD Information Security Program
6Which policy should you consult to find the physical security requirements of protecting classified information?
- ADoD 5200.08-R, Physical Security Program
- BDoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
- CDoDM 5200.01, Volumes 1-4 DoD Information Security Program
7Which policy authorizes commanders to issue regulations for the protection or security of property and places under their command?
- ADoD 5200.08-R, Physical Security Program
- BDoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
- CDoDM 5200.01, Volumes 1-4 DoD Information Security Program
8Who is charged with management, implementation, and direction of all physical security programs?
- ALaw Enforcement
- BAntiterrorism Officer
- COPSEC Officer
- DCI Support
- EPhysical Security Officer
9Who is responsible for providing valuable information on the capabilities, intentions, and threats of adversaries?
- ALaw Enforcement
- BAntiterrorism Officer
- COPSEC Officer
- DCI Support
- EPhysical Security Officer
10Who is responsible for developing countermeasures against potential threats to national security and other DoD assets?
- ALaw Enforcement
- BAntiterrorism Officer
- COPSEC Officer
- DCI Support
- EPhysical Security Officer
11Which of the following individuals should be included in a Threat Working Group?
- AAntiterrorism Officer
- BCounterintelligence (CI) representative
- CLaw enforcement representative
- DOperations security officer
- EInformation operations representative
- FChemical, biological, radiological, nuclear and high yield explosive representative
12Which of these can be made of solid steel to make them more attack resistant?
- AWalls
- BDoors
- CWindows
- DRoofs
13Which of these house ventilation systems that should be secured with steel bars?
- AWalls
- BDoors
- CWindows
- DRoofs
14Which of these should be covered with a protective film to make them less dangerous in an attack?
- AWalls
- BDoors
- CWindows
- DRoofs
15Which of the following locks are approved to secure classified information or material?
- AKaba Mas X-10
- BS&G 8077/AD
- CS&G 833 C
16Standby lighting is used when regular lighting is not available.
- ATrue
- BFalse
17Site lighting is used to enable guard force personnel to observe activities inside or outside the installation.
- ATrue
- BFalse
18Movable lighting is used when supplemental lighting is needed such as at construction sites.
- ATrue
- BFalse
19At a minimum _________ should include special and general guard orders, access and material control, protective barriers, lighting systems, locks, and Intrusion Detection Systems (IDS).
- AStandard Operating Procedures
- BPhysical Security Plans
- CPost Orders
20________ establish duties, roles, and responsibilities at individual assignments, checkpoints, gates, and guard posts.
- AStandard Operating Procedures
- BPhysical Security Plans
- CPost Orders
21___________provide supplemental guidance for physical security programs and establish procedures for emergency events as well as operational and administrative procedures.
- AStandard Operating Procedures
- BPhysical Security Plans
- CPost Orders
22Commanders may only implement measures according to the FPCON level in force at the time.
- ATrue
- BFalse
23Commanders must comply with and integrate DoD physical security and installation access control policies into their FPCON plans.
- ATrue
- BFalse
24Commanders educate their personnel on the insider threat to DoD elements and personnel.
- ATrue
- BFalse
25Which threat level signifies terrorists are present but there are no indications of anti-U.S. activity and the Operating Environment favors the Host Nation or the U.S.?
- AHigh
- BModerate
- CLow
- DSignificant
26Who is responsible for assessing requirements for physical security and conducting criticality, vulnerability, and risk assessments?
- AAntiterrorism Working Group
- BThreat Working Group
- CAntiterrorism Executive Committee
- DMission Assurance Senior Steering Group
27Commanders should comply with and integrate DoD physical security and installation access control policies into their Force Protection Conditions (FPCON) plans.
- ATrue
- BFalse
28______________ are provided to senior leaders to assist in determining the appropriate Force Protection Condition (FPCON) level.
- AAntiterrorism countermeasures
- BThreat levels
- CPhysical security layer strategies
29Which of the following establishes duties and responsibilities that assist in maintaining operational order during both normal and stressful situations?
- AStandard Operating Procedures and the Physical Security Plan
- BPost Orders and the Physical Security Plan
- CStandard Operating Procedures and Post Orders
30Select ALL the correct responses.
Which of the following are facility access control procedures?- AIdentification systems
- BElectronic gate
- CEntry and exit inspections
31Inspections can ensure compliance with the physical security plan, verify policy compliance, and promote cost effective security.
- ATrue
- BFalse
32Site lighting supplements other protective measures.
- ATrue
- BFalse
33Who is responsible for identifying threats and informing the installation Commanding Officer on current threats?
- AMission Assurance Senior Steering Group
- BThreat Working Group
- CAntiterrorism Executive Committee
- DAntiterrorism Working Group
34The primary purpose of physical security is prevention and protection.
- ATrue
- BFalse
35When required, the two-person concept may be part of a facility access control method.
- ATrue
- BFalse
36Select ALL the correct responses. Which of the following are appropriate physical security countermeasures?
- ADesks with digital drawer locks for classified material
- BProtective barriers
- CSite lighting
37Which of the following implements the physical security aspects of protecting classified information?
- ADoDM 5200.01
- BDoD 5200.08-R
- CDoDI 5200.08
38Who is responsible for physical security planning, coordination, and integration of identified mission essential capabilities?
- AInstallation Commander/Facility Director
- BCI Support
- CAntiterrorism Officer
- DOPSEC Officer
39Select ALL the correct responses.
Security Forces may be comprised of which of the following?- AMission Assurance Senior Steering Group
- BDoD civilian personnel
- CMilitary working dogs
- DMilitary and contract personnel
40Which of the following best defines security-in-depth?
- AThe use of fencing around the perimeter of a structure
- BThe use of barriers around the perimeter of a structure
- CThe layering of physical security measures through the application of active and passive complementary security controls
41Which of the following physical security countermeasures serve as a security system response force?
- AOPSEC Personnel
- BCounterintelligence Personnel
- CSecurity forces
- DAntiterrorism Working Group
42Which step in the risk management process is designed to identify and assess the perceived imminence of intended aggression by a capable entity to harm a nation, a government, or its instrumentalities?
- AIdentify and assess Threats
- BIdentify and assess Vulnerabilities
- CDetermine Countermeasure Options
- DIdentify and assess Assets
43Which of the following typically establish duties, roles, and responsibilities at individual assignments, checkpoints, and gates?
- AStandard Operating Procedures
- BExecutive Orders
- CPost Orders
44Who is responsible for supporting antiterrorism concerns, efforts, and emergency response and law enforcement activities?
- ACI Support
- BLaw Enforcement Officials
- COPSEC Officer
- DPhysical Security Officer
45What regulation covers Physical Security?
- ADOD5200.08
- BDOD 5200.08-R
46What regulation covers Information Security?
- ADODM 5200.01 (Vol 1-4)
- BDOD 5200.08-R
47What is the Primary purpose of Physical Security?
- APREVENTION
- BPROTECTION
- CPREPARATION
48Which policy should you consult to find the physical security requirements of protecting classified information?
- ADOD 5200.08-R
- BDODI 5200.08
- CDODM 52001.01, Vol 1-4
49Which policy authorizes commanders to issue regulations for the protection or security and places under their command?
- ADOD 5200.08-R
- BDOD5200.08
- CDODM 5200.01, Vol 1-4
50Well-designed _______________, including detection, deterrence, delay, denial, and notification, are accomplished through the development of a plan outlining who will do what, where, when, and how.
- AThreat Level Indicators
- BPhysical security measures
- CForce Protection
51The _____________ system allows commanders to be flexible and adaptable in developing and implementing antiterrorism measures that are more stringent than those mandated by higher authorities whenever they are invoked.
- AThreat level indicators
- BAntiterrorism physical security measures
- CForce Protection Conditions (FPCON)
52Who is responsible for developing and maintaining physical security plans, establishing standard policies and procedures for a facility and/or installation?
- APhysical Security Officer
- BAntiterrorism Officer
- COPSEC Officer
- DInstallation Commander/Facility Director
53Select ALL the correct responses. Which of the following are site design considerations that provide a physical and psychological deterrence to intruders?
- ACard key system for entrance/exit doors
- BWarning Signs
- CGate/Guard
- DMilitary Dogs
54Which of the following are supplemental guidance for implementing specific components of the physical security program to cover events such as major accidents, fire, and bomb threats?
- APost Orders
- BExecutive Orders
- CStandard Operating Procedures
55The _________________________ provides oversight in mission assurance efforts on issues that cut across all DoD protection programs and functions as an Office of Secretary of Defense (OSD) and Joint Staff-level management and decision support forum.
- AThreat Working Group
- BAntiterrorism Working Group
- CAntiterrorism Executive Committee
- DMission Assurance Senior Steering Group
56Which of the following is conducted by members of your own organization and usually with the aid of a checklist?
- ASelf-Inspection
- BInternal Control Inspection
- CCompliance Inspection
57In order to plan and implement effective physical security measures, you must use the __________________ to determine where and how to allocate your security resources.
- Arisk management process
- Boperation assessment process
- Cthreat assessment process
- Dvulnerability assessment process
58Select ALL the correct responses. Which of the following protective measures can make doors more attack-resistant?
- AInstall solid steel doors
- BLimit the number of entrances and exits to what is necessary
- CMount cameras on the roof
59What is the first line of defense in any physical security system?
- ASite lighting
- BBarriers and fencing
- CSensors
60The Threat Working Group is responsible for identifying foreign, domestic, and local threats and informing the installation commanding officer of current threat trends in the area of responsibility.
- ATrue
- BFalse
61Which of the following is defined as defensive measures used to reduce the vulnerability of individuals and property to terrorist attacks, to include limited response and containment?
- AAntiterrorism
- BPhysical Security Plan
- CForce Protection
- DThreat Level Indicators
62Which threat level signifies anti-U.S. terrorists are operationally active and use large casualty-producing attacks as their preferred method of operation?
- AHigh
- BModerate
- CSignificant
- DLow
63Select ALL the correct responses. Which of the following represent the purpose of physical security?
- ADeter intruders
- BPrevent theft, damage, or unauthorized access to assets
- CManpower
- DSafeguard against threats
64Who is responsible for providing information on the capabilities, intentions, and threats of adversaries associated with foreign intelligence entities?
- ACI Support Personnel
- BOPSEC Officer
- CAntiterrorism Officer
- DPhysical Security Officer
65The ______________________ is a comprehensive written plan for appropriate and economical use of personnel and equipment to prevent or minimize criminal and disruptive activities.
- APhysical Security Plan
- BCybersecurity Plan
- CCOMSEC Plan
- DMonthly Action Plan
66Which of the following is conducted by a senior official to ensure regulatory requirements are being met and include assist visits, command inspections, and Inspector General (IG) inspections?
- ASelf-Inspection
- BInternal Control Inspection
- CCompliance Inspection
67_____________ have reinforced concrete on all walls, ceilings, and floors and hardened steel doors.
- AVAULTS
- BSECURE ROOMS
68GSA-approved security containers can be used to store classified information, weapons, and sensitive items.
- ATrue
- BFalse
69Who is responsible for managing the installation or facility antiterrorism program and using defensive measures to reduce vulnerability of individuals and property from terrorist attacks?
- AOPSEC Officer
- BCI Support
- CAntiterrorism Officer
- DPhysical Security Officer
70Select ALL the correct responses. Which of the following is an exterior intrusion detection system (IDS)?
- AProximity detectors
- BFence disturbance sensors
- CBuried line sensors that detect vibrations
71_______________________ is the most common protective lighting system, consisting of a series of fixed lights arranged to flood an area with overlapping cones of light.
- AStandby lighting
- BMovable lighting
- CContinuous lighting
- DEmergency lighting
72Security systems such as intrusion detection systems (IDS) and closed circuit television (CCTV) systems are countermeasures.
- ATrue
- BFalse
73Which type of locks may be appropriate for safeguarding classified information?
- ACombination Locks such as a built-in electromechanical lock
- BKey-operated locks such as the high security padlock or mortise lock
- CLow security padlock
74Select ALL the correct responses. Which of the following comprise the Mission Assurance Senior Steering Group?
- ACounterintelligence Officers
- BOPSEC Officers
- CSenior Executive Service
- DGeneral or flag officers at the one and two-star levels
75Which of the following statements best describes an example of point security?
- AProtection at an entry and exit location using guards
- BProtection of an entire area of the installation or facility by consolidating as many assets as possible.
76Select ALL the correct responses. Which of the following are examples of security-in-depth, layering of physical security countermeasures?
- AStaff assist visits
- BInspections
- CLighting and cameras
- DFencing and guards
77Select ALL the correct responses. Which of the following are types of inspections that can ensure compliance with the physical security plan?
- AInternal Control Inspection
- BCompliance inspection
- CSelf-inspection
78Select ALL the correct responses. Which of the following are the weakest points in a building?
- AEntrance/Exit doors
- BAir conditioning and ventilation units housed on roof tops
- CInterior doors made of wood or composite material
- DWindows that can shatter
79The primary purpose of physical security is ____________ and protection.
- Aattacking intruders
- Bsecurity-in-depth
- Cprevention
Information
- Description
- SFPC SFPC Quiz on PHYSEC Quiz, created by Casey Neville on 05/05/2022.
- Author
- Casey Neville
- Language
- English
- Views
- 4,439
- Tags
- Rating
- 5.0 out of 5 · 1 rating Rate this quiz