Quiz
TCP/IP and the DoD Model
Questions in this quiz (39)
1The Department of Defense created the DoD model which is made of four layers. What are they?
- ANetwork layer
- BNetwork access layer
- CProcess/Application layer
- DData Link Layer
- EInternet Layer
- FHost to Host Layer
2The Process/Application from the DoD model is equal to what layers in the OSI model?
- AApplication Layer
- BTransport Layer
- CPresentation Layer
- DNetwork Layer
- ESession Layer
3The Host to Host layer from the DoD model is equal to what layer of the OSI model?
- ANetwork Layer
- BTransport Layer
- CNetwork Access
4The Network Access of the DoD model is equal to what layers of the OSI model?
- AData Link Layer
- BNetwork Layer
- CInternet Layer
- DPhysical Layer
5The DoD Process/Application Layer provides support on different applications. Which of these applications does it support?
- ATelnet and SSH
- BHTTP/HTTPS
- CSMTP/ SNMP
- DNTP and NFS
- EDNS, DHCP and BootP
- FPOP, FTP, and TFTP
- GIPv4 and IPv6
6Telnet is a protocol that its specialty is __________ ____________.
- AAccessing information.
- BTerminal Emulation.
7With File Transfer Protocol (TFTP) there is no authentication.
- ATrue
- BFalse
8Post Office Protocol (POP) and Internet Message Access Protocol (IMAP) provides a storage facility for incoming mail. Its only used for receiving email.
- ATrue
- BFalse
9Simple Mail Transfer Protocol (SMTP) is used to spool, queue, and send email only.
- ATrue
- BFalse
10What is the well known port number for FTP?
- A20 (FTP data) and 21 (FTP Control)
- B23 (FTP data) and 24 (FTP Control)
11What is the well know port number for Secured Shell and Telnet
- APort 19 (SSH) and Port 23 (Telnet)
- BPort 22 (SSH) and Port 23 (Telnet)
12What is the well known port numbers for HTTP and HTTPS?
- APort 80 (HTTP) and Port 442 (HTTPS)
- BPort 80 (HTTP) and Port 443 (HTTPS)
13What is the well known port numbers for SMTP and DNS?
- APort 25 (SNMP) and Port 53 (DNS)
- BPort 25 (SMTP) and Port 52 (DNS)
- CPort 25 (SMTP) and Port 53 (DNS)
14DNS (Port 53) uses both TCP and UDP
- ATrue
- BFalse
15What is the well known port numbers for SNMP and BOOTP/DHCP?
- APort 161(SNMP) and Port 67 (BOOTP/DHCP)
- BPort 67 (SNMP) and Port 161 (BOOTP/DHCP)
16TCP is a full duplex, ______________ protocol that uses a virtual circuit for a sesssion, and UDP is a _____________ protocol that does not provide a virtual circuit for a session.
- Aconnection-oriented, connection-less
- Bconnection-less, connection-oriented
17In the Dod Model, the only protocols that the Host to Host layer provide are TCP and UDP
- ATrue
- BFalse
18TCP segment format contains a 16 bit source port and 16 bit destination port. It also contains a 32 bit sequencing number (when receiving segments) and a 32 bit acknowledgment (To request the next expected data via windowing)
- ATrue
- BFalse
19UDP format does not sequence nor does it use any form of windowing so no acknowledgments are expected. Also it does not create a virtual circuit. The only format for UDP is a 16 bit Source port and a 16 bit destination port. It does have a 16 bit Length field and a 16 bit Checksum field along with the data.
- ATrue
- BFalse
20Ports up to 1023 are considered to be well known port numbers as defined by the RFC 3232.
- ATrue
- BFalse
21In the Dod Model the Internet Layer, what are the protocols supported?
- AInternet Protocol (IP)
- BSession Protocol
- CProxy ARP (Address Resolution Protocol)
- DReverse Address Resolution Protocol
- ELogical addressing protocol
- FAddress Resolution Protocol
- GInternet Control Message Protocol (ICMP)
22What are the ports used in the Internet Layer's IP header to provide over to the Host to Host layer of the DoD model for both TCP and UDP?
- APort 6 (TCP) and Port 17 (UDP)
- BPort 15 (UDP) and Port 17 (TCP)
23The Protocol field in the IP header for the Host to Host (DoD) and Transport (OSI) layers can also be using protocols aside from TCP and UDP. What are the protocols?
- APort 4 (IP Tunneling) Port 115 (Layer 2 Tunneling)
- B Port 88 (EIGRP) and Port 89 (OSPF)
- CPort 41 (IPv6) and Port 1 (ICMP)
24What finds a hardware address from a known IP address?
- AReverse Address Resolution Protocol (RARP)
- BAddress Resolution Protocol (ARP)
25What finds an IP address from its known hardware address?
- AReverse Address Resolution Protocol (RARP)
- BAddress Resolution Protocol (ARP)
26This is a technique by which a device on a given network answers the ARP queries for a network address that is not on that network.
- AAddress Resolution Protocol (ARP)
- BProxy Address Resolution Protocol (ARP)
- CReverse Address Resolution Protocol (RARP)
27Internet Protocol (IP) is a connection-less protocol
- ATrue
- BFalse
28What are port numbers used for?
- APort numbers are used to transfer information from one layer to another.
- BPort numbers are used to identify the protocol or service that is to be used in the transmission.
29The four layers of the TCP/IP Stack are 1)_________, 2) _____________, 3) ____________, 4)_____________.
- AProcess / Application, Host to Host, Internet, Network Access
- BApplication, Transport, Internet, Network Access
30The four layers of the DOD model are 1) ___________, 2) ____________, 3)_____________, 4) _____________ .
- AProcess / Application, Host to Host, Internet, Network Access
- BApplication, Transport, Internet, Network Access
31The TCP/IP Protocol Suite is the networking model and a set of communication protocols used for the internet and similar networks.
- ATrue
- BFalse
32What are the TCP/IP Protocols for the Application Layer? (Choose three)
- AUDP and TCP
- BEthernet, and Token Ring.
- CTelnet and SSH
- DSwitches and Bridges
- EHTTP and FTP
- FDHCP, SMTP, and SNMP
33What are the TCP/IP Protocols for the Application Layer? (Choose three)
- AUDP and TCP
- BEthernet, and Token Ring.
- CTelnet and SSH
- DSwitches and Bridges
- EHTTP and FTP
34What is the TCP/IP Stack Model protocols for the Transport Layer?
- AIPv4 and IPv6
- BICMP and ARP
- CTCP and UDP
- DEthernet and Token Ring
35What are the TCP/IP Model protocols for the Internet Layer? (Choose three)
- AEthernet and Token Ring
- BIPv4 and IPv6
- CHTTP and FTP
- DICMP and ARP
- ERARP
- FSNMP
36What are the TCP/IP Model Protocols for the Network Access layer? (Choose three)
- ATCP and UDP
- BIPv4 and IPv6
- CEthernet and Token Ring
- DHTTP and FTP
- EHardware Adapters
- FX.25 and FDDI
37What two protocols uses session multiplexing?
- AHTTP and HTTPS
- BIPv4 and IPv6
- CTCP and UDP
38TCP uses port number ____ for FTP, and for Telnet ____ and for HTTP ______ when supporting Application layer services.
- AFTP=21, Telnet=25, HTTP=80
- BFTP=23, Telnet=21, HTTP=80
- CFTP=21. Telnet=23, HTTP=80
39What of the following are considered "Well Known Ports"? (Choose two)
- AFTP=21 Telnet=23 SMTP=25
- BHTTP=8080
- CHSRP=1985
- DDNS=53, SNMP=161, TFTP=69
Information
- Description
- Understanding of the DoD network model that was designed by the Department of Defense.
- Author
- sirhulk1
- Language
- English
- Views
- 188
- Tags
- Rating
- No ratings yet Rate this quiz