Quiz
AZ-700 - 1
This quiz has question types that open in the usual player.
Questions in this quiz (20)
1Your company has a single on-premises datacenter in Washington DC. The East US Azure region has a peering location in Washington DC.
The company only has Azure resources in the East US region.
You need to implement ExpressRoute to support up to 1 Gbps. You must use only ExpressRoute Unlimited data plans. The solution must minimize costs.
Which type of ExpressRoute circuits should you create?- AA. ExpressRoute Local
- BB. ExpressRoute Direct
- CC. ExpressRoute Premium
- DD. ExpressRoute Standard
2You fail to establish a Site-to-Site VPN connection between your company's main office and an Azure virtual network.
You need to troubleshoot what prevents you from establishing the IPsec tunnel.
Which diagnostic log should you review?- AA. IKEDiagnosticLog
- BB. RouteDiagnosticLog
- CC. GatewayDiagnosticLog
- DD. TunnelDiagnosticLog
3You plan to configure BGP for a Site-to-Site VPN connection between a datacenter and Azure.
Which two Azure resources should you configure? Each correct answer presents a part of the solution. (Choose two.)
NOTE: Each correct selection is worth one point.- Aa virtual network gateway
- BAzure Application Gateway
- CAzure Firewall
- Da local network gateway
- EAzure Front Door
4HOTSPOT -
You need to connect an on-premises network and an Azure environment. The solution must use ExpressRoute and support failing over to a Site-to-Site VPN connection if there is an ExpressRoute failure.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
- ABaseado em políticas
- BBaseado em rota
- CRoteamento estático
- D1
- E2
- F3
5You have an Azure virtual network and an on-premises datacenter.
You are planning a Site-to-Site VPN connection between the datacenter and the virtual network.
Which two resources should you include in your plan? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.- Aa user-defined route
- Ba virtual network gateway
- CAzure Firewall
- DAzure Web Application Firewall (WAF)
- Ean on-premises data gateway
- Fan Azure application gateway
- Ga local network gateway
6You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN.
Users will authenticate by an on-premises Active Directory domain.
Which additional service should you deploy to support the VPN authentication?- Aan Azure key vault
- Ba RADIUS server
- Ca certification authority
- DAzure Active Directory (Azure AD) Application Proxy
7Your company has offices in New York and Amsterdam. The company has an Azure subscription. Both offices connect to Azure by using a Site-to-Site VPN connection.
The office in Amsterdam uses resources in the North Europe Azure region. The office in New York uses resources in the East US Azure region.
You need to implement ExpressRoute circuits to connect each office to the nearest Azure region. Once the ExpressRoute circuits are connected, the on-premises computers in the Amsterdam office must be able to connect to the on-premises servers in the New York office by using the ExpressRoute circuits.
Which ExpressRoute option should you use?- AExpressRoute FastPath
- BExpressRoute Global Reach
- CExpressRoute Direct
- DExpressRoute Local
8Your company has an on-premises network and three Azure subscriptions named Subscription1, Subscription2, and Subscription3.
The departments at the company use the Azure subscriptions as shown in the following table.
All the resources in the subscriptions are in either the West US Azure region or the West US 2 Azure region.
You plan to connect all the subscriptions to the on-premises network by using ExpressRoute.
What is the minimum number of ExpressRoute circuits required?
- A1
- B2
- C3
- D4
- E5
9You have the hybrid network shown in the Network Diagram exhibit.
You have a peering connection between Vnet1 and Vnet2 as shown in the Peering-Vnet1-Vnet2 exhibit.
You have a peering connection between Vnet1 and Vnet3 as shown in the Peering-Vnet1-Vnet3 exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
Os recursos no Vnet2 podem se comunicar com os recursos no Vnet1 [blank_start]Não[blank_end]
Os recursos no Vnet2 podem se comunicar com os recursos no Vnet3 [blank_start]Não[blank_end]
Os recursos no Vnet2 podem se comunicar com os recursos na rede local [blank_start]Não[blank_end]
- ANão
- BSim
- CNão
- DSim
- ENão
- FSim
10HOTSPOT -
You have an Azure subscription that contains a single virtual network and a virtual network gateway.
You need to ensure that administrators can use Point-to-Site (P2S) VPN connections to access resources in the virtual network. The connections must be authenticated by Azure Active Directory (Azure AD).
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:s
- AUm pacote de acesso
- BPolítica de acesso condicional
- CUm aplicativo empresarial
- DUm certificado VPN
- EIKEv2
- FIKEv2 e SSTP (SSL)
- GOpenVPN (SSL)
- HSSTP (SSL)
11HOTSPOT -
You have on-premises datacenters in New York and Seattle.
You have an Azure subscription that contains the ExpressRoute circuits shown in the following table.
You need to ensure that all the data sent between the datacenters is routed via the ExpressRoute circuits. The solution must minimize costs.
How should you configure the network? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
- ADireto
- BCaminho rápido
- CAlcance Global
- DPrêmio
- EMicrosoft
- FPrivado
- GPúblico
12HOTSPOT -
You have the Azure environment shown in the exhibit.
You have virtual network peering between Vnet1 and Vnet2. You have virtual network peering between Vnet4 and Vnet5. The virtual network peering is configured as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Hot Area:
VM1 e VM4 podem se comunicar [blank_start]SIM[blank_end]
VM2 e VM4 podem se comunicar [blank_start]SIM[blank_end]
VM1 e VM5 podem se comunicar [blank_start]SIM[blank_end]
- ASIM
- BNÃO
- CSIM
- DNÃO
- ESIM
- FNÃO
13You have an Azure virtual network named Vnet1 and an on-premises network. The on-premises network has policy-based VPN devices.
In Vnet1, you deploy a virtual network gateway named GW1 that uses a SKU of VpnGw1 and is route-based.
You have a Site-to-Site VPN connection for GW1 as shown in the following exhibit.
You need to ensure that the on-premises network can connect to the route-based GW1.
What should you do before you create the connection?- ASet Connection Mode to ResponderOnly.
- BSet BGP to Enabled.
- CSet Use Azure Private IP Address to Enabled.
- DSet IPsec / IKE policy to Custom.
14HOTSPOT
-
Your on-premises network contains a VPN device.
You have an Azure subscription that contains a virtual network and a virtual network gateway.
You need to create a Site-to-Site VPN connection that has a custom cryptographic policy.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
- ANew-AzlpsecPolicy
- BNew-AzlpsecTrafficSelectorPolicy
- CNew-AzServiceEndpointPolicy
- DNew-AzVpnClientipsecPolicy
- ENew-AzVirtualHub
- FNew-AzVirtualNetworkGateway
- GNew-AzVirtualNetworkGatewayConnection
- HNew-AzVirtualNetworkGatewayNatRule
15You are planning an Azure deployment that will contain three virtual networks in the East US Azure region as shown in the following table.
A Site-to-Site VPN will connect Vnet1 to your company’s on-premises network.
You need to recommend a solution that ensures that the virtual machines on all the virtual networks can communicate with the on-premises network. The solution must minimize costs.
What should you recommend for Vnet2 and Vnet3?
- AVNet-to-VNet VPN connections
- Bpeering
- Cservice endpoints
- Droute tables
16HOTSPOT -
In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate ASG1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
- ANSG1 only
- BNSG1 and NSG2 only
- CNSG1, NSG2, and NSG5 only
- DNSG1, NSG2, NSG4, and NSG5 only
- ENSG1, NSG2, NSG3, NSG4, and NSG5
- FVM2 only
- GVM2 and VM5 only
- HVM2, VM4, and VM5 only
- IVM2, VM3, VM4, and VM5
17Your company has an office in New York.
The company has an Azure subscription that contains the virtual networks shown in the following table.
You need to connect the virtual networks to the office by using ExpressRoute. The solution must meet the following requirements:
• The connection must have up to 1 Gbps of bandwidth.
• The office must have access to all the virtual networks.
• Costs must be minimized.
How many ExpressRoute circuits should be provisioned, and which ExpressRoute SKU should you enable?- Aone ExpressRoute Premium circuit
- Btwo ExpressRoute Premium circuits
- Cfour ExpressRoute Standard circuits
- Done ExpressRoute Standard circuit
18You have an Azure subscription that contains a virtual network.
You plan to deploy an Azure VPN gateway and 90 Site-to-Site VPN connections. The solution must meet the following requirements:
• Ensure that the Site-to-Site VPN connections remain available if an Azure datacenter fails.
• Minimize costs.
Which gateway SKU should you specify?- AVpnGw1AZ
- BVpnGw2AZ
- CVpnGw4AZ
- DVpnGw5AZ
19DRAG DROP
-
Your on-premises network contains an Active Directory Domain Services (AD DS) domain named contoso.com that has an internal certification authority (CA).
You have an Azure subscription.
You deploy an Azure application gateway named AppGwy1 and perform the following actions:
• Configure an HTTP listener
• Associate a routing rule with the listener
You need to configure AppGwy1 to perform mutual authentication for requests from domain-joined computers to contoso.com.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.- ANo AppGwy1, crie uma configuração de IP de frontend
- BNo AppGwy1, crie um perfil SSL (1)
- CNo AppGwy1, adicione um ouvinte HTTP e associe-o ao perfil SSL (3)
- DNo AppGwy1, crie uma regra de roteamento (4)
- EDe um computador local, carregue um certificado no AppGwy1 (2)
20You have an Azure subscription that contains the resources shown in the following table.
You create a virtual network named Vnet2 in the West US region.
You plan to enable peering between Vnet1 and Vnet2.
You need to ensure that the virtual machines connected to Vnet2 can connect to VM1 and VM2 via LB1.
What should you do?- AFrom the Peerings settings of Vnet2, set Traffic forwarded from remote virtual network to Allow
- BChange the Floating IP configurations of LB1
- CFrom the Peerings settings of Vnet1, set Traffic forwarded from remote virtual network to Allow
- DChange the SKU of LB1
Information
- Description
- Técnico Tecnologia Quiz on AZ-700 - 1, created by Alexandre Oliveira on 30/09/2024.
- Author
- Alexandre Oliveira
- Language
- Português
- Views
- 0
- Tags
- Rating
- No ratings yet Rate this quiz