GoConqr has a new look! Let us know what you think.

Sign up free

Quiz

4.5 Gas Turbine Auxillaries and Operation

TRAVIS CANNING 10 questions

Take the quiz

Questions in this quiz (10)

  1. 1The lubrication oil system of a gas turbine must be checked for:
    1. Metal particles
    2. Water contamination
    3. Dirt contamination
    4. Leaks
    1. A1,2,4
    2. B1,3,4
    3. C2,3,4
    4. D1,2,3
    5. E1,2,3,4
  2. 2Aero-derivative gas turbines normally use _______ bearings:
    1. AJournal
    2. BRadial tilt-pad
    3. CShell
    4. DAntifriction
    5. EAir
  3. 3Micro-turbines normally use ______ bearings:
    1. AJournal
    2. BRadial tilt-pad
    3. CShell
    4. DAntifriction
    5. EAir
  4. 4Auxillary systems on gas turbines are needed to:
    1. Provide fuel at the proper temperature and pressures
    2. Clean and treat fuels
    3. Provide hydraulic fluid for bearing lubrication
    4. Inject steam to clean the ducts and housing
    5. Provide anti-icing
    1. A1,2,3
    2. B2,3,4
    3. C3,4,5
    4. D1,2,5
    5. E2,4,5
  5. 5The exhaust of a gas turbine most commonly contains:
    1. Nitrogen oxides
    2. Sulphur dioxide
    3. Particulate matter
    4. Carbon monoxide
    1. A1,2
    2. B1,3
    3. C2,3,4
    4. D1,2,3
    5. E1,4
  6. 6Gas turbine oil systems consist of these basic components:
    1. An oil reservoir to ensue an adequate supply of oil
    2. Filters to ensure the oil is clean
    3. Pumps to provide pressure
    4. Coolers to ensure oil temperatures are kept within operating limits
    5. Protective, monitoring and control devices
    1. A1,2,3
    2. B1,2,4
    3. C1,3,4,5
    4. D2,3,4
    5. E1,2,3,4,5
  7. 7All piping, fittings and reservoir use _____ to prevent corrosion.
    1. AStainless steel
    2. BBrass
    3. CAluminum
    4. DCarbon steel
    5. EPolycarbonate
  8. 8Gas turbine lubricating oil systems provide the basic functions of:
    1. Lubricating sliding surfaces in the bearings
    2. Sealing out dirt and moisture
    3. Cooling the bearings
    4. Sealing the gas passages
    1. A1,2
    2. B1,3
    3. C1,4
    4. D1,2,3
    5. E1,2,4
  9. 9Exhaust systems are required on Gas turbines to:
    1. Allow the installation of silencers
    2. Allow the installation of heat recovery equipment
    3. Direct the flow to heat recovery systems
    4. Minimize power losses
    5. protect operators
    1. A1,3,5
    2. B1,2,3
    3. C3,4,5
    4. D1,4,5
    5. E1,3,4
  10. 10A mandatory auxillary in a gas turbine installation is a/an:
    1. AGenerator
    2. BReheater
    3. CStarting motor
    4. DAir heater
    5. EWater pump

Information

Description
power engineering 3b2 Quiz on 4.5 Gas Turbine Auxillaries and Operation, created by TRAVIS CANNING on 29/02/2016.
Language
English
Views
42
Rating
No ratings yet
Rate this quiz
Rate this quiz

Feedback

What is it about?

What do you think of the new look?

How do you like it?