GoConqr has a new look! Let us know what you think.

Quiz

ISM

Monica Saad 65 questions

Take the quiz

Questions in this quiz (65)

  1. 1Which lossless Ethernet functionality helps Converged Enhanced Ethernet (CEE) devices to
    convey and configure their features with the other CEE devices in the network?
    1. ACongestion notification
    2. BEnhanced transmission selection
    3. CPriority-based flow control
    4. DData center bridging exchange protocol
  2. 2What is a benefit of configuring EX_Ports on each Fibre Channel over IP (FCIP) gateway in an
    FCIP tunnel implementation?
    1. ACreates eight virtual FC links on the FCIP tunnel that can be paused and restarted
      independently
    2. BTransfers VSAN tagged traffic over the FCIP tunnel without FC protocol overhead
    3. CEnables FC-FC routing through the FCIP tunnel without merging the fabrics
    4. DMerges the fabrics at either end of the FCIP tunnelto create a single large fabric
  3. 3In an FCoE environment, which functionality provides a framework for the allocation of bandwidth
    to different network traffic classes?
    1. APriority-based flow control
    2. BEnhanced transmission selection
    3. CCongestion notification
    4. DData center bridging exchange protocol
  4. 4What is a component of an FCoE switch?
    1. AVirtual N_Port
    2. BConverged Network Adapter
    3. CEthernet Bridge
    4. DFCIP Forwarder
  5. 5What is a function of a Fibre Channel Forwarder in an FCoE SAN?
    1. AProvides both NIC and FC HBA functionality
    2. BEncapsulates IP packets into FC frames
    3. CApplies zoning configurations and provides fabric services
    4. DTransfers FCoE traffic over an FC SAN
  6. 6What is an accurate statement about VLANs and VSANs in an FCoE environment with an existing
    FC SAN?
    1. AA dedicated VLAN must be configured for each VSAN
    2. BVLANs configured for VSANs must carry regular LAN traffic
    3. CDefault VLAN must map to all VSANs defined in the FCoE switch
    4. DA minimum of four VLANs must be created to isolate VSAN traffic
  7. 7Which action takes place during the login phase in an FCoE SAN?
    1. AVN_Port to N_Port pairing is established
    2. BVN_Ports obtain FC addresses
    3. CNodes locate the Fibre Channel Forwarder
    4. DInitialization protocol starts transporting FC data
  8. 8What is an accurate statement about a fabric-provided MAC address (FPMA) used in an FCoE
    SAN?
    1. AFC switches provide MAC addresses to VE_Ports dynamically during discovery
    2. BFCoE switches provide MAC addresses to VN_Ports during node login
    3. CCompute systems provide MAC addresses to the VF_Ports on FCoE switches
    4. DBoth VF_Ports and VE_Ports obtain MAC addresses from FC switches
  9. 9What is determined by the recovery point objective in a business continuity solution?
    1. ADistance between the primary and disaster recovery sites
    2. BType of backup devices
    3. CType of disaster recovery site
    4. DFrequency of the backup
  10. 10A system has three components and all three components need to be operational for 24 hours;
    Monday through Friday. During a particular week, failure of component 3 occurred as follows:
    Tuesday = 8 AM to 1 PM
    Thursday = 5 PM to 10 PM
    Friday = 5 AM to 10 AM
    What is the mean time between failures on component 3 for that week?
    1. A40 hours
    2. B5 hours
    3. C51 hours
    4. D35 hours

Information

Description
Quiz on ISM, created by Monica Saad on 07/08/2017.
Language
English
Views
7
Rating
No ratings yet
Rate this quiz
Rate this quiz

Feedback

What is it about?

What do you think of the new look?

How do you like it?