Question 1
Question
If new tyres had been fitted to a vehicle, what would indicate that they hadn’t been dynamically balanced?
Question 2
Question
Tyre soap is used to?
Answer
-
Help the bead slip over the rim
-
Extend the working life of the tyre
-
Lock the tyre onto the wheel rim
-
Clean the tyre bead
Question 3
Question
The part of the machine arrowed is used to?
Answer
-
Remove the wheel weights
-
Break the tyre bead
-
Clamp the wheel rim
-
Inflate the tyre
Question 4
Question
The markings TWI found on a tyre side wall refers to?
Answer
-
Tyre wear indicator
-
Tread wear indicator
-
Tyre wheel information
-
Tyre weight information
Question 5
Question
What type of tyre construction is this?
Answer
-
Crossply
-
Tubed
-
Bias belted
-
Radial
Question 6
Question
The part of the rim arrowed is designed for what purpose?
Answer
-
To allow removal of the tyre
-
To keep the tyre on the rim
-
To provide a good seal
-
To help with inflation of the tyre
Question 7
Question
A tyre marked185/60 R14 84H. In relation to the diagram what number would represent 60?
Question 8
Question
The correct way to dispose of waste tyres should be to?
Question 9
Question
From the diagram, what would the arrowed sections represent?
Answer
-
10,000 miles of wear left
-
3mm of tread
-
1.6mm of tread, legally requires replacing
-
1mm of tread illegal
Question 10
Question
The part of the machine arrowed is used to?
Answer
-
Remove the wheel weights
-
Break the tyre bead
-
Clamp the wheel rim
-
Inflate the tyre
Question 11
Question
When are you most likely to use this type of tyre?
Answer
-
Motorway driving
-
Off roading
-
Rain
-
General road use
Question 12
Question
What type of tyre construction is this?
Answer
-
Radial
-
Tubed
-
Bias belted
-
Crossply
Question 13
Question
A visual inspection would likely show?
Question 14
Question
When road testing a vehicle after fitting new tyres, the technician should check the vehicle for?
Question 15
Question
A torque wrench is used to tighten wheel nuts because?
Question 16
Question
Wheels that are fitted to only go in one direction should not be?
Question 17
Question
When removing a wheel from a vehicle you must?
Question 18
Question
What does the R in 185/65 R 14 stand for?
Question 19
Question
The purpose of this tool is to?
Question 20
Question
Oval bolt holes in a wheel indicate?
Answer
-
Special nuts are used
-
The wheel has been over tightened
-
The wheel has been run loose
-
It is a space saver wheel