Quiz
Tech Ed Tools Test #2
This quiz has question types that open in the usual player.
Questions in this quiz (20)
1The name of the tool in the picture is...
- AA rotating saw
- BA reprimanding saw
- CA revololting saw
- DA reciprocating Saw
2Using information from the picture, where should your place a fence to cut off 4 & 2/16 inches from the board using a circular saw?
- A4 5/16
- B3 1/16
- C5 3/16
- D5 3/8
3What part of the saw is the arrow pointing to in the picture?
- AThe Guard
- BThe Shield
- CThe Catch
- DThe Cover
- EThe Cut Inhibitor
4The tool in the picture is called a belt saw.
- ATrue
- BFalse
5The tool in the picture is called a reciprocating saw.
- ATrue
- BFalse
6Chose the picture of a Scroll Saw.
- A
- B
- C
- D
- E
- A
7The notch at the bottom of the pictured bit is necessary if you want to use the bit with what tool?
- Aa driver
- Ba drill
- Ca drill press
- Da router
- Ea computer
8The tool in the picture is called a random orbital sander.
- ATrue
- BFalse
9Choose ONLY the following tools from the pictures available:
- A Belt Sander
- A Compact Router- A
- B
- C
- D
- E
- F
- G
- A
10Select the names of all the tools that are NOT in the picture.
- Arandom orbital sander
- Bdrill press
- Cbelt sander
- Drouter
- Edrill
- Fjig saw
- Gcircular saw
- Hreciprocating saw
- Imiter saw
- Jband saw
11The tool in the picture being used to glue this box together is called a [blank_start]pipe clamp[blank_end].
- Apipe clamp
12If I asked you to hand me screw drivers for the three screws shown in the picture , starting on the left and moving to the right, you would hand me
- A1. A Strait Head screwdriver 2. A Phil Head Screwdriver 3. A Star head Screwdriver
- B1. A Phillips Head Screwdriver 2. A Fault Head Screwdriiver 3. An Allen Head Scewdriver
- C1. A Flat Head Screwdriver 2. A Phillips Head Screwdriver 3. A Star Head Screwdriver
- D1. A Single Slot Screwdriver 2. A Plus Head Screwdriver 3. A Multi Slot Screwdriver
13What is wrong with how the man in this image is dressed for the shop? (Check all that apply)
- ANot wearing some form of eye protection
- BWearing jewelry
- CHair is too long and not tucked into collar, in a bun, or under a hat
- DDoes not have long sleeves pushed up around his elbows
- EHas on a work apron
- FDoes not have ear protection
- GLoose clothing is not tucked in
14What is wrong with how the man in this image is dressed for the shop? (Check all that apply)
- ANot wearing safety glasses
- BWearing Jewelry
- CLong sleeves not pushed up around his elbows
- DLoose clothing not tucked in
- Elong hair not tucked into collar, up in a bun, or under a hat
- FNot wearing ear protection to reduce the effect of loud noises
15This saw is being operated correctly.
- ATrue
- BFalse
16Select any of the saws below that could accurately and safely make the beveled cut in the picture.
- A
- B
- C
- D
- E
- F
- G
- A
17The blade in the picture can be used with a table saw, a [blank_start]circular saw[blank_end] or a [blank_start]miter saw.[blank_end]
- Acircular saw
- Bmiter saw
18What reason might the two blades in the picture have for having different amounts of teeth that are also different sizes.
- Aless/bigger teeth cuts slower, more/shorter teeth cuts faster
- Bless/shorter teeth makes a smoother cut, more/bigger teeth makes a rougher cut
- Cless/shorter teeth makes a curved cut, more/bigger teeth makes a strait cut
- Dmore/shorter teeth is better for cutting metal, less/bigger teeth is better for cuting wood
19This saw is being operated correctly.
- ATrue
- BFalse
20A drill press can drill holes at a consistent depth and at a consistent 45 degree angle.
- ATrue
- BFalse
Information
- Description
- 9th grade Trades Quiz on Tech Ed Tools Test #2, created by Mike Driscoll on 23/03/2017.
- Author
- Mike Driscoll
- Language
- English
- Views
- 307
- Tags
- Rating
- No ratings yet Rate this quiz