¡GoConqr estrena diseño! Cuéntanos qué te parece.

Fichas

Basic Renal Structure

Angus Cooper Anatomy & Physiology Masters Inglés 28 fichas

Fichas del conjunto (28)

  1. 1What is the principal organ of the renal system?Kidney
  2. 2What are the main roles of the renal system?Regulate the blood content and volume and the homeostatic regulation of the internal fluid environment.
    Production of urine for elimination
  3. 3What are the two main components of the kidney?The cortex - which comprises of the majority of nephrons
    The medulla - which comprises of a few nephrons
  4. 4Name the major components of the nephronGlomerulus
    Bowman's capsule
    Proximal convoluted tubule
    Descending and Ascending loop of Henle
    Distal convoluted tubule
    Collecting duct
  5. 5Name the two types of nephronsCortical nephrons
    and juxtamedullary nephrons
  6. 6Which type of capillaries serve the juxtamedullary nephronsThe vasa recta.
    Other nephrons are served by peritubular capillaries
  7. 7Name the main functions associated with each component of the nephronGlomerulus / Bowman's - filtration of blood components
    PCT - the reabsorption of filtrate
    Loop of Henle - concentrates urine
    DCT - reabsorption and secretion of filtrate
    collecting duct - reabsorption + movement of final filtrate (urine) out of kidney
  8. 8What % of the cardiac output goes to the kidney and how many millilitres is it?20-25% and ~ 1.5L/min
  9. 9What are the two auto regulation mechanisms that the kidney uses to adjust blood flow?The myogenic reflex - used to adjust blood flow for BP regulation. When blood pressure is increased, the afferent arteriole is constricted to ensure a decrease in GFR and a decrease in blood flow.
    The Tubuglomerular feedback - chemoreceptors sense a change in the osmolarity of the filtrate and can adjust the GFR and RAAS system in order to adjust osmolarity to correct level.
  10. 10What structure takes the filtrate from the kidney to the bladder?The ureters.
  11. 11What is the name of the muscle of the bladder and how much liquid can the bladder hold?The detrusor muscle and the bladder can hold 300-500 mL
  12. 12What structure is the tube the leads the urine out of the body?The urethra.
    It is 18-20cm in males and 4cm in women
  13. 13How does the process of voiding/urination take place?The stretch receptors in the bladder can stimulated by increasing amounts of urine in the bladder. When the stretch receptors are adequately stimulated, an action potential is sent to the brain to signal that there is an excess amount of urine and voiding needs to take place. You become aware that you need to urinate. The signal is then returned to the bladder, stimulating the contraction of the detrusor muscle. This puts sustained pressure of the bladder and further signals are sent to the brain relaying a need to void. When the cerebral cortex relaying information that it is an appropriate time to urinate, the voluntary relaxation of the external sphincter through motor neurons subsequently causes the internal sphincter to involuntary relax and urination takes place.
  14. 14What is the difference between reabsorption and secretion?Secretion involves the movement of a solute from the peritubular capillary into the tubular lumen for excretion, reabsorption involves the movement of a solute from the tubular lumen into the peritubular blood.
  15. 15How is the filtration pressure changed and what is the pressure in mmHg?The filtration pressure is changed by adjusting the diameter of the afferent and efferent arterioles of the glomerulus, and the pressure within the glomerulus is 56-60mmHg
  16. 16What does GFR actually reflect?The amount of filtrate produced each minute by all nephrons in BOTH kidneys.
    Is approx. 125ml/min OR 180L/24 hours
  17. 17What is the typical urine output of a human?1-1.5L / 24 hours.
    This is due to >99% of filtrate being reabsorbed in nephron
  18. 18What is the main function of reabsorption?To maintain the composition of plasma level of the blood at homeostatic levels.
  19. 19What are some of the main molecules that are reabsorbed at the PCT?H2O
    Glucose
    Ions (Na, K, Mg, Cl, HCO3, Ca)
  20. 20What are some of the main molecules that are secreted at the PCT?Uric Acid
    Urea
    H+
  21. 21What components are reabsorbed in each section of the Loop of Henle?Descending Loop (thin)
    - H2O is passive reabsorbed
    - membrane is impermeable to sodium
    - makes urine more concentrated
    Ascending Loop (thick)
    - H2O is impermeable in this section
    - ions (Na, K, Cl) are active reabsorbed (pump)
    - makes urine less concentrated
  22. 22What components are reabsorbed in the DCT?Na is predominately reabsorbed here but it is in much smaller amounts compared to PCT.
    DCT is relatively impermeable to H2O thus urine becomes even less concentrated by this point.
    Ion transportation in DCT is controlled via endocrine system (ADH)
  23. 23What are different types of cells within the collecting ducts and what do they reabsorb/secrete?Principal cells reabsorb water and sodium. secrete potassium
    Intercalated cells reabsorb potassium via ATP pump.
    secrete H+ ions
  24. 24Countercurrent multiplication is what type of feedback loop? Explain why it is the type of feedback loop.A positive feedback loop.
    As the sodium (and other ions) are pumped out of the ascending loop of Henle, this causes a large amount of water to leave the tubule in the descending loop. This concentrates the solute as it gets to the bottom of the loop and when the concentrated solute arrives back into ascending loop, this high level of concentration accelerates the movement of solute via the pump.
  25. 25How does ADH influence urine production?It causes increased H2O permeability within the DCT and collecting duct, which increases urine concentration and the retention of water by the body.
  26. 26How does Aldosterone influence urine production?Aldosterone causes an increase in the rate of sodium being transported out of the tubule and into the blood, leading to increased water reabsorption.
  27. 27Outline how the RAAS influences blood pressure. E.g., blood pressure drops due to blood loss.1. Juxtaglomerular apparatus secrete renin after sensing reduced blood pressure within the afferent renal arteriole.
    2. Renin, an enzyme, causes the breakdown of a protein called angiotensinogen into angiotensin I.
    3. Angiotensin I travels through the blood to the pulmonary system where it is converted via another enzyme called ACE, and angiotensin II is formed.
    4. Angiotensin II is a powerful vasoconstrictor, which causes systemic vasoconstriction through out the circulatory system. This vasoconstriction increases peripheral resistance and thus, increases blood pressure.
    5. Angiotensin II also causes the release of Aldosterone from the suprarenal cortex, causing an increase in sodium reabsorption in the kidneys. This reabsorption of sodium leads to more water being reabsorbed. An increase in water, leads to an increase in total blood volume in the circulatory system. This increase in TBV also elevates the peripheral resistance and thus blood pressure.
  28. 28Name some complications of the renal system related to ageingKidneys shrink with age, and nephrons decrease in size and number, leading to a decrease in the GFR.
    GFR only 50% of a healthy adult.
    Increase in basement membrane of bowman's with age, leading to larger molecules being excreted, such as proteins.
    Decreased renal blood flow, leads to a decrease in vascular resistance.
    Bladder shrinks with age, leading to increasing need to void, and reduced capacity.

Información

Descripción
Masters Anatomy & Physiology Fichas sobre Basic Renal Structure, creado por Angus Cooper el 20/06/2018.
Creado por
Angus Cooper
Visitas
33
Valoración

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué te parece el nuevo diseño?

¿Te gusta?