Disassembly and assembly of computer system

Disassembly and assembly of computer system

1. Remove the motherboard

   • Remove the power supply
     • Remove the power connector, CPU fan, cabinet fan, front panel, and remaining drives. Remove the SMPS screws and detach it from the tower cabinet.
   • Assembly of the computer system
     • Mount the processor in the socket, the heat sink on the top of the processor and the CPU fan on the top of the heat sink.
       • The motherboard is attached vertically to the tower case and is screwed. Align the power supply, connect the power connectors for the motherboard and the CPU fan power supply. Install the CD / DVD drives, the hard disk drive, and the diskette drive and screw them in. Mount the memory modules, aligning the RAM to its socket and pushing it down. Install the internal cards. Cover the tower and screw it down.
   • Remove the screws from the hob and detach it from the cabinet. Remove the fan from the CPU. The heat sink can be removed by pulling the tab up. Finally, the processor can be removed by the plastic tab.