Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Diapositivas

Storage and fuel cells

becky wells Inglés 2 diapositivas

Diapositivas del conjunto (2)

  1. Storage and fuel cells

    • Modern storage cells work just the same as electrochemical cells.
    • By using electrode potentials of substances you can calculate the amount of energy produced
    • The three main types of cells are:
    • Non-rechargable cells- these provide electrical energy untill the chemical have completely reacted and then the cell becomes flat
    • Rechargable cells- chemicals in the cell produce electrical energy by reacting and this may be reverse by recharging the cell. the cell can be reued again as the chemicals are regenerated. an example is lithium-polymer batteries
    • Fuel cells-continuous supplies of a fuel and oxidant are required. electrical energy will be provided by the cell as long as there is a supply of a fuel and oxidant.
    • PROS & CONS
    • Lithium cells produce a lot of energy however, they are toxic if ingested and have been know to cause fires and explosions
    • Hydrogen fuel cells require no recharging and are very useful for travelling short distances
    • However, hydrogen fuel cells are sensitive to temperature changes. They are not capable of functioning in temperatures over 100 degrees celsius and are know to degrade in such heat
  2. Fuel cells

    • Modern fuel cells are based on hydrogen rich fuel, for example, methanol.
    • Fuel cells generate their energy from the reaction of oxygen with the fuel used, creating a voltage.
    • Fuel cells are continuous as long as there is a continuous supply of reactants.
    • At the anode, hydrogen is put in and it split into protons and electrons by the anode. The electrons are then passed through the circuit, creating a voltage.
    • At the cathode, oxygen is combined with the protons and the electrons that have transferred through the electrolyte from the anode to create water.
    • Water vapour is then given off.
    • At the cathode (negative electrode):
    • H2(g) – 2e– → 2H+(aq)
    • At the anode (positive electrode):
    • 4H+(aq) + O2(g) + 4e– → 2H2O(g)
    • https://youtu.be/6UwSazq8GTU (Enclavar)
    • Pie de imagen: How a fuel cell converts hydrogen and oxygen into energy

Información

Descripción
Diapositivas sobre Storage and fuel cells, creado por becky wells el 07/03/2017.
Creado por
becky wells · mar 2017
Actualizado
7 mar 2017
Visitas
3
Valoración

Más sobre Batteries and Fuel Cells

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?