Ayúdanos a dar forma a GoConqr. ¿Qué deberíamos añadir?

Test

QENKA - Chapter 4 - IP Services

Vlad 100 preguntas

Hacer el test

Preguntas del test (100)

  1. 1Which method will allow you to use RFC 1918 addresses for Internet requests?
    1. ACIDR
    2. BClassful addressing
    3. CNAT
    4. DVPN
  2. 2In the following exhibit, what is the inside local IP address?Imagen de la pregunta 2
    1. A192.168.1.2 Host A
    2. B192.168.1.1 Router A Gi0/0
    3. C179.43.44.1 Router A S0/0
    4. D198.23.53.3 web server
  3. 3In the following exhibit, what is the inside global IP address?Imagen de la pregunta 3
    1. A192.168.1.2 Host A
    2. B192.168.1.1 Router A Gi0/0
    3. C179.43.44.1 Router A S0/0
    4. D198.23.53.3 web server
  4. 4In the following exhibit, what is the outside global IP address?Imagen de la pregunta 4
    1. A192.168.1.2 Host A
    2. B192.168.1.1 Router A Gi0/0
    3. C179.43.44.1 Router A S0/0
    4. D198.23.53.3 web server
  5. 5Which command will allow you to view the NAT translations active on the router?
    1. ARouter#show ip nat translations
    2. BRouter#show nat translations
    3. CRouter#debug ip nat translations
    4. DRouter#show translations nat
  6. 6Which command will display an overview of the current number of active NAT translations on the router, as well as other overview information?
    1. ARouter#show ip nat translations
    2. BRouter#show ip nat summary
    3. CRouter#show ip nat status
    4. DRouter#show ip nat statistics
  7. 7In the following exhibit, which command will configure static NAT for the internal web server?Imagen de la pregunta 7
    1. ARouterA(config)#ip nat inside source static 192.168.1.3 179.43.44.1
    2. BRouterA(config)#nat source static 192.168.1.3 179.43.44.1
    3. CRouterA(config)#ip nat static 192.168.1.3 179.43.44.1
    4. DRouterA(config)#ip nat source static 192.168.1.3 179.43.44.1
  8. 8In the following exhibit, the enterprise owns the address block of 179.43.44.0/28. Which command will create a NAT pool for Dynamic NAT?Imagen de la pregunta 8
    1. ARouterA(config)#ip nat pool EntPool 179.43.44.0/28
    2. BRouterA(config)#ip pool EntPool 179.43.44.2 179.43.44.15netmask 255.255.255.0
    3. CRouterA(config)#ip nat pool EntPool 179.43.44.1 179.43.44.15netmask 255.255.255.240
    4. DRouterA(config)#ip nat pool EntPool 179.43.44.2 179.43.44.15netmask 255.255.255.0
  9. 9When configuring dynamic NAT, why must you configure an access list?
    1. AThe access list allows incoming access from outside global addresses.
    2. BThe access list allows outgoing access from inside local addresses.
    3. CThe access list allows outgoing access from outside local addresses.
    4. DThe access list allows outgoing access from inside global addresses.
  10. 10Which command will wipe out all current NAT translations in the NAT table?
    1. ARouter#no ip nat translation
    2. BRouter#clear ip nat translation
    3. CRouter#clear ip nat translation *
    4. DRouter#clear ip nat

Información

Descripción
- CCNA Test sobre QENKA - Chapter 4 - IP Services, creado por Vlad Vlad el 09/09/2020.
Idioma
English
Visitas
23
Etiquetas
ccna-
Valoración
Aún sin valoraciones
Valora este test
Valora este test

Más sobre IP Addressing, IPv4 and IPv6

Escríbenos

¿Sobre qué es tu mensaje?

¿Qué deberíamos añadir?