word

1. 1The [blank_start]Word wrap[blank_end] features automatically moves text to the next line when one line is full

   1. AWord wrap
2. 2The [blank_start]print[blank_end] feature, which is now incorporated with the print command, enables you to see how a document will look when it is printed.

   1. Aprint
3. 3The [blank_start]home[blank_end] tab on the ribbon is the place where document are created.

   1. Ahome
4. 4Before character or text format can be applied to existing text, the text must be [blank_start]highlighted[blank_end].

   1. Ahighlighted
5. 5The alignment used to begin and end all lines at the same position on the left and right margins is [blank_start]center[blank_end].

   1. Acenter
6. 6use the [blank_start]copy format[blank_end] command to copy a paragraph format to another paragraph

   1. Acopy format
7. 7The [blank_start]thesaurus[blank_end] command is to locate synonyms for a word

   1. Athesaurus
8. 8A green wavy line under text indicates a potential [blank_start]Contextual[blank_end] error

   1. AContextual
9. 9A potential spelling error is indicates by a(n) [blank_start]red[blank_end] wavy line.

   1. Ared
10. 10the [blank_start]autocorrect[blank_end] command reverse changes made in formatting or keying text.

    1. Aautocorrect

11. 11The [blank_start]file tab[blank_end] contains the commands needed to work with files ( such as Save/Save As, New, Open, and Close).

    1. Afile tab
12. 12Commands such as Save, Redo, and Undo can be accessed easily from the [blank_start]Quick access toolbar[blank_end].

    1. AQuick access toolbar
13. 13The [blank_start]Clipboard[blank_end] group contains Cut, Paste, Copy, and Format Painter commands

    1. AClipboard
14. 14To make a document easier to read, use the [blank_start]paragraph button[blank_end] view.

    1. Aparagraph button
15. 15To obtain the meaning of a word in another language, use the [blank_start]translation[blank_end] command.

    1. Atranslation
16. 16use [blank_start]slider[blank_end] to change the magnification of the document view.
    

    1. Aslider
17. 17the [blank_start]mini[blank_end] toolbar appears when you select text.

    1. Amini
18. 18The three basic components of the ribbon are:
    [blank_start]tabsgroupscommands[blank_end]

    1. Atabs groups commands
19. 19a(n) [blank_start]memo[blank_end] is a form of written communication that is used primarily for internal communication

    1. Amemo
20. 20[blank_start]Open[blank_end] punctuation does not include a colon after the salutation or a comma after the complimentary closing.

    1. AOpen
21. 21when preparing an envelope for a business letter, click [blank_start]add to document[blank_end] view tab to have the envelop display at the top of the document containing the letter.

    1. Aadd to document
22. 22When a business letter is addressed to a company, the correct salutation is [blank_start]ladies and gentleman[blank_end]

    1. Aladies and gentleman
23. 23use [blank_start]1"[blank_end] side margins for a business letter

    1. A1"
24. 24when formatting a modified block letter, position the date at [blank_start]closing[blank_end]

    1. Aclosing
25. 25when keying a business letter, position the date at [blank_start]2"[blank_end]

    1. A2"
26. 26when an item is included in a letter, a(n) [blank_start]enclosure[blank_end] notation is keyed one blank line below the reference initials

    1. Aenclosure
27. 27when keying the date, tap the Enter key [blank_start]2[blank_end] time(s)

    1. A2
28. 28after keying the complimentary closing, tab the ENTER key [blank_start]2[blank_end] time(s).

    1. A2
29. 29The [blank_start]c.[blank_end] notation is used to indicate that a copy of the letter is being sent to another person.

    1. Ac.
30. 30After keying a paragraph in the body of the letter, Tap the ENTER key [blank_start]1[blank_end] time(s)

    1. A1
31. 31[blank_start]mixed[blank_end] punctuation includes a colon after the salutation and a comma after the complimentary closing.

    1. Amixed
32. 32The [blank_start]autocorrect[blank_end] feature causes the c in the copy notation to be capitalized when keying a copy notation.

    1. Aautocorrect
33. 33The left tab needed to key a copy notation is [blank_start]0.5"[blank_end]

    1. A0.5"
34. 34the left tab needed to key an enclosure notation that identifies the enclosure is [blank_start]1"[blank_end]

    1. A1"
35. 35The appropriate salutation for a letter addressed to Ms. DeAndra Lincoln is [blank_start]Dear Ms. Lincoln[blank_end]

    1. ADear Ms. Lincoln
36. 36to insert the current date, click Date & Time from the [blank_start]insert[blank_end] tab

    1. Ainsert
37. 37the [blank_start]launch box[blank_end] is clicked to display a dialog box

    1. Alaunch box
38. 38A vertical list of information in a table is called a(n) [blank_start]column[blank_end]

    1. Acolumn
39. 39a horizontal list of information in a table is called a(n) [blank_start]row[blank_end]

    1. Arow
40. 40Columns and rows of data- either alphabetic, numeric or both is called a [blank_start]table[blank_end]

    1. Atable
41. 41An intersection of a column and a row is called a [blank_start]cell[blank_end]

    1. Acell
42. 42In a table each cell has its own address consisting of the column letter and the row number

    1. AVerdadero
    2. BFalso
43. 43tables are created by using the insert or the quick toolbar

    1. AVerdadero
    2. BFalso
44. 44to move to the next cell tap the [blank_start]tab[blank_end] key.

    1. Atab
45. 45to move to the previous cell tap the [blank_start]shift + tab[blank_end]

    1. Ashift + tab
46. 46to increase the height of the row tap the [blank_start]tab[blank_end] key

    1. Atab
47. 47if you tab enter by mistake, tap the [blank_start]backspace[blank_end] to delete the line

    1. Abackspace
48. 48use the [blank_start]table properties[blank_end] dialog box to center-align a table horizontally

    1. Atable properties
49. 49[blank_start]styles[blank_end] display a gallery to apply shading, borders, and font attributes to tables

    1. Astyles
50. 50the rows & columns group can be accessed by clicking the table tools [blank_start]layout[blank_end] tab

    1. Alayout
51. 51[blank_start]merge[blank_end] is the process of combining two or more adjacent cells into a single cell.

    1. Amerge
52. 52A cell or several selected cells can be divided into multiple cells and columns by using the [blank_start]split[blank_end] command

    1. Asplit
53. 53select [blank_start]no borders[blank_end] if you want to remove all borders from a table

    1. Ano borders
54. 54by default, a table uses [blank_start]single[blank_end] spacing, regardless of the spacing elsewhere in the document.

    1. Asingle
55. 55the [blank_start]sizing[blank_end] handle can be used to make the table larger or smaller

    1. Asizing
56. 56if a table has a secondary heading, its size should be [blank_start]smaller[blank_end] than that of the primary heading

    1. Asmaller
57. 57the cell address for the first cell in a table is [blank_start]A1[blank_end]

    1. AA1
58. 58to adjust all columns in a table to the width of their longest line, use [blank_start]Autofit contents[blank_end]

    1. AAutofit contents
59. 59to add a light blue fill to the final row of a table, use the [blank_start]shading[blank_end] tool.

    1. Ashading
60. 60use the [blank_start]add space before paragraph[blank_end] command to make sure space is the same after a table as before it

    1. Aadd space before paragraph
61. 61when adjusting column width, approximately [blank_start]0.5" - 0.75"[blank_end] of blank should be left between the longest line and the column border

    1. A0.5" - 0.75"
62. 62the [blank_start]line style[blank_end] list gives you options such as dashed lines or double lines.

    1. Aline style
63. 63the two additional tabs in the Table Tools layout Tab are Design and layout

    1. AVerdadero
    2. BFalso
64. 64Margins for unbound reports are 1" side margins, 1" top margin, and 1" bottom margin. tap Enter to begin the first page 2

    1. AVerdadero
    2. BFalso
65. 65to set margins, click margins from the layout tab

    1. AVerdadero
    2. BFalso
66. 66use title format displays the first line of text at the left margin and indents all other lines to the first tab

    1. AVerdadero
    2. BFalso
67. 67use title style for the main headings. use heading 1 for the side headings.

    1. AVerdadero
    2. BFalso
68. 68to prevent a side heading from printing at the bottom of a page, apply the [blank_start]keep with next[blank_end] command

    1. Akeep with next
69. 69to number the pages of a multiple-page report, click the page button on the insert tab

    1. AVerdadero
    2. BFalso
70. 70page numbers are positioned at the [blank_start]top-right heading[blank_end]

    1. Atop-right heading
71. 71long quotations are indented [blank_start]0.5[blank_end] from the left margin

    1. A0.5
72. 72a quotation is considered a long quotation and indented from the left margin if the quoted material is [blank_start]4[blank_end] or more lines

    1. A4
73. 73footnotes are positioned at the [blank_start]end[blank_end] of the page

    1. Aend
74. 74to create a title page for a report, use the [blank_start]copy page[blank_end] feature

    1. Acopy page
75. 75references cited in a report are often indicated within the text by a subscript/ reference number and a corresponding footnote with full information at the bottom of the same page where the reference is cited

    1. AVerdadero
    2. BFalso
76. 76begin the reference page at approximately [blank_start]1[blank_end] from the top of the page

    1. A1
77. 77the left margin for a left bound report is [blank_start]1.5"[blank_end]

    1. A1.5"
78. 78a [blank_start]page break[blank_end] is inserted in a report when the user needs to force the beginning of a new page

    1. Apage break
79. 79the shortcut for beginning a new page is [blank_start]ctrl + enter[blank_end]

    1. Actrl + enter
80. 80the shortcut for formatting a hanging indent is [blank_start]ctrl + T[blank_end]

    1. Actrl + T
81. 81to apply a document theme the path is: design/document formatting/[blank_start]themes[blank_end]

    1. Athemes
82. 82the style applied to the main heading of a report is [blank_start]title[blank_end]

    1. Atitle
83. 83the style applied to the side heading of a report is [blank_start]heading 1[blank_end]

    1. Aheading 1
84. 84to delete a footnote at the bottom of the page, select the reference subscript/number in the text and tap backspace/delete

    1. AVerdadero
    2. BFalso
85. 85the default theme is [blank_start]office[blank_end] theme

    1. Aoffice
86. 86removing the header from the first page of a report is called different first page. to do this, click on different first page in the design tab from the options group

    1. AVerdadero
    2. BFalso
87. 87to remove page numbers click remove [blank_start]page numbers[blank_end]

    1. Apage numbers
88. 88to remove a header click remove [blank_start]header[blank_end]

    1. Aheader
89. 89to save a document as a template, click file/ Save As. In the Save As type box, click the down arrow and select word template. the extension is dotx

    1. AVerdadero
    2. BFalso
90. 90the two styles to format an academic report are MLA and APA style

    1. AVerdadero
    2. BFalso
91. 91to maintain a clip art image's proportions, always drag a(n) [blank_start]corner handle[blank_end] to size it

    1. Acorner handle
92. 92[blank_start]compressing[blank_end] the pictures reduces the file size

    1. Acompressing
93. 93pictures may be moved with the position command or by dragging them with the mouse

    1. AVerdadero
    2. BFalso
94. 94[blank_start]wrap text[blank_end] determines how text wraps around a selected object, such as a picture

    1. Awrap text
95. 95page borders can be formatted using a variety of settings, styles, colors and line widths. they can be applied to the whole document or to various sections of the document

    1. AVerdadero
    2. BFalso
96. 96[blank_start]smart art[blank_end] consists of predesigned diagrams that help to simplify complex concepts

    1. Asmart art
97. 97In Smart Art, the [blank_start]text pane[blank_end] options adjust to match each layout

    1. Atext pane
98. 98[blank_start]Word art[blank_end] adds special effects to text to make it more interesting

    1. AWord art
99. 99insert a [blank_start]Continuous Section break[blank_end] to balance the columns.

    1. AContinuous Section break
100. 100to add a line between columns, from the number of columns options, click more columns to display the columns dialog box.
     click line between

     1. AVerdadero
     2. BFalso

Descripción

SEC I excel Test sobre word, creado por sera nguyen el 28/10/2016.

Autor

sera nguyen

Idioma

English

Visitas

1

Etiquetas

excelsec i

Valoración

Aún sin valoraciones

Valora este test

Valora este test

Más sobre Word Processing Basics and Tools