Flashcards
SIT716 - Networks and Security 1

Cards in this deck (200)
- 1SyntaxRefers to the words of the language used in the communication
- 2SemanticsRefers to the grammar of the language. How words are used together to form sentences.
- 3Timing or synchronisationWhen something can be said
- 4Recoverywhat to do when something unexpected happens.
- 5NotationSpecial syntax for elements such as the address of a web page
- 6EncapsulationDividing the data into smaller parts and reconstructing the original data are relatively straightforward mechanisms — however, some parts may not arrive at the destination, or the parts could arrive out of order. To resolve this problem, metadata is added at the start of each part and includes a sequence number to identify the original order of those parts
- 7DecapsulationAt the destination, the receiver then examines the sequence number in the metadata to identify any missing parts and to reorder any parts that arrive out of order. Lastly, the metadata is removed from the parts, known as decapsulation, before the original data is reconstructed.
- 8OSI7 Layers
7. Application
6. Presentation
5. Session
4. Transport
3. Network
2. Data Link
1. Physical - 9OSI Layer 1. Physical LayerDefines the physical characteristics of the network. This includes the specifications for cables, connections, and how bits are transmitted and received
- 10OSI Layer 2. Data Link LayerIncludes local addressing to identify the destination node on the network and adds additional data to mark the start and end of a transmission (framing). It allows logical data units to be delivered to another node on the same network
- 11OSI Layer 3. Network LayerIntroduces routing to allow data to be forwarded from network to network until it reaches its final destination. This requires a new type of addressing, global addressing which allows nodes attached to any network to be uniquely identified from anywhere
- 12OSI Layer 4. Transport LayerThis layer is responsible for delivering data from one application to another (end-to-end). It isolates applications from variations that may be encountered in the underlying network by providing any services required to ensure consistent delivery semantics regardless of the underlying network
- 13OSI Layer 5. Session LayerUsed for managing a “session” between two communicating applications over (potentially) several transport connections. Eg consider continuing a conversation after a phone line drops out
- 14OSI Layer 6. Presentation layerHandles any necessary data conversion requirements including data compression and encryption
- 15OSI Layer 7. Application layerdefines the protocols that are actually used by application programs to communicate user data (the SMTP protocol we examined earlier is an example).
- 16POP3Post Office Protocol
- 17LDAPLightweight Directory Access Protocol
TCP/389 - 18VoiPVoice Over IP
TCP - 19OSI Model

- 20OSI Layer 1. Physical Layer

- 21OSI Layer 2. Data Link Layer

- 22MACMedia Access Control
- 23DLCData Link Control
- 24OSI Layer 3. Network Layer

- 25IP Fragmentation

- 26OSI Layer 4. Transport Layer

- 27TCPTransmission Control Protocol
- 28UDPUser Datagram Protocol
- 29OSI Layer 5. Session Layer

- 30OSI Layer 6. Presentation Layer

- 31OSI Layer 7. Application Layer

- 32HTTPHyper Text Transfer Protocol
TCP/ - 33FTPFile Transfer Protocl
- 34DNSDomain Name System
TCP/53 - 35OSI Model

- 36SSLSecure Sockets Layer
- 37WireShark Packet Capture

- 38WireShark SRCSource
- 39WireShark DstDestination
- 40WireShark Breakdown

- 41Protocol Layering

- 42ISOInternational Organization for Standardization
- 43Protocol Layering LLC and MAC

- 44LLCLogical Link Control
- 45DARPADefense Advanced Research Projects Agency
- 46ARPANETAdvanced Research Projects Agency Network
- 47AARNETAustralian Academic and Research Network
- 48TCP/IP Model Internet Standard #3

- 49LINK LAYERThis layer is effectively a combination of the OSI Physical and Data Link layers
- 50INTERNET LAYERThis layer closely matches the functionality suggested by the OSI Network layer
- 51TRANSPORT LAYERThis layer closely matches the functionality suggested by the OSI Transport layer
- 52APPLICATION LAYERThis layer is effectively a combination of the OSI Session, Presentation, and Application layers.
- 53NICNetwork Interface Card
- 54Threat IntelligenceThreat intelligence is evidence-based knowledge, including context, mechanisms, indicators, implications and actionable advice, about an existing or emerging menace or hazard to assets that can be used to inform decisions regarding the subject’s response to that menace or hazard.
- 55World's Biggest Hacks

- 56Websites for Current AttacksAkamai - a live map of web attacks known to be happening at the current time based on Akamai’s content delivery network (click on the ‘Attacks’ tab)
Cisco Talos - a live map of current email traffic volumes (in billions of emails) being sent around the world including identified SPAM and Malware activity
Checkpoint - a live map of attacks detected by their threat intelligence serices
Digital Attack Map - a live map of current Distributed Denial of Service (DDoS) attacks detected by their threat intelligence service
FireEye - a live map of attacks detected by their threat intelligence services
Fortinet - a live map of attacks detected by their threat intelligence services
Kaspersky Internet Security - a live map of activity detected by their products
LookingGlass Threat Map - a live map of attacks detected by their threat intelligence services. - 57The Cyber Kill Chain Model1. Reconnaissance
2. Weaponization
3. Delivery
4. Exploitation
5. Installation
6. Command and Control
7. Actions On Objective - 58The Cyber Kill Chain Model 1. ReconnaissanceThe attacker learns as much as they can about one or more targets by reviewing information available, often from public web sites such as social media, events that they have participated in, and so on
- 59The Cyber Kill Chain Model 2. WeaponizationThe attacker prepares a package (payload) to be sent to their targets including a disguised remote access trojan (malware that provides remote control), such an email with an attachment containing executable code or macros (such as a Word document).
- 60The Cyber Kill Chain Model 3. DeliveryThe attacker delivers the payload to their targets through means such as email, web sites (even advertisements on web sites), or a USB removable media
- 61The Cyber Kill Chain Model 4. ExploitationThe triggering/invoking of the attackers code (payload) either through automation functionality (such as autorun on older Windows platforms) or through direct user involvement
- 62The Cyber Kill Chain Model 5. InstallationThe attackers payload will take actions to provide persistent access, such as by installing remote access trojan or a backdoor
- 63The Cyber Kill Chain Model 6. Command and ControlThe software providing persistent access will regularly contact a server controlled by the attacker, granting the attacker an established pathway to execute commands directly on the compromised computer at will.
- 64The Cyber Kill Chain Model 7. Actions On ObjectiveThe attacker can now use the control they have gained to perform other attacks (likely their original intention), such as extracting data (known as data exfiltration) or conducting other attacks on further victims (using the compromised computer to gain access behind a firewall), and so on.
- 65APTAdvanced Persistent Attack
- 66CNDComputer Network Defense
- 67ISRIntelligence, Surveillance and Reconnaissance
- 68ABSACAttack Based Sequential Analysis of Countermeasures
- 69CNDComputer Network Defense
- 70CNEComputer Network Espionage
- 71TMETargeted Malicious Email
- 72PDFPortable Document Format
- 73PEPortable Executable
- 74FCSFrame Check Sequence
- 75ICMPInternet Control Message Protocol
- 76SNMPSimple Network Management Protocol
- 77FTPFile Transfer Protocol
- 78SMTPSimple Mail Transfer Protocol
- 79RATRemote Access Trojan
- 80WirelineConnected with wires or cables
- 81Simpledata is transmitted only in one direction
- 82Half-duplexdata can be transmitted in either direction but only in one direction at any time
- 83Full-duplexdata can be transmitted in both directions at the same time.
- 84Point-to-pointonly two devices are connected to the physical media
- 85Multipointmore than two devices can share the physical media.
- 862. Data Link Layer FramingFraming is used to convert the services of the Physical Layer into something more useful.
- 872. Data Link Layer AddressingAddressing represents the means by which the sending device is able to identify the intended destination for its transmission.
- 88OUIOrganizationally Unique Identifier
- 89SFDStart Frame Delimiter
- 90SoFStart of Frame
- 91EoFEnd of Frame
- 92LANLocal Area Network
- 93MANMetropolitan Area Network
- 94PANPersonal Area Network
- 95RANRegional Area Network
- 96CSMA/CACarrier Sense Multiple Access with Collision Avoidance
- 97RTSRequest To send
- 98CTSClear To Send
- 99ACKAcknowledge
- 100BSSBasic Set Service
- 101IBSSIndependent Basic Set Service
- 102ESSExtended Service Set
- 103WLCWireless LAN Controller
- 104LAPLightweight Access Points
- 105WEPWired Equivalent Privacy
- 106WPAWireless Protected Access
- 107RSNRobust Security Network
- 108TKIPTemporal Key Integrity Protocol
- 109CCMPCBC-MAC Protocol
- 110HFCHybrid Fiber Coaxial Cable
- 111O.S.I.Open Systems Interconnection
- 112—


- 113—


- 114—


- 115—


- 116—


- 117—


- 118—


- 119—


- 120—


- 121OSI Layer 1. Physical LayerThe Physical Layer provides the mechanical, electrical, functional and procedural means to activate, maintain, and de-activate physical-connections for bit transmission between data-link-entities. A physical-connection may involve intermediate open systems, each relaying bit transmission within the Physical Layer. Physical Layer entities are interconnected by means of a physical medium.
- 122Direction of transmission can be: Simplexdata is transmitted only in one direction
- 123Direction of transmission can be: Half-duplexdata can be transmitted in either direction but only in one direction at any time
- 124Direction of transmission can be: Full-duplexdata can be transmitted in both directions at the same time.
- 125The physical layer also defines the physical topology of the network link as: Point-to-pointOnly two devices are connected to the physical media
- 126The physical layer also defines the physical topology of the network link as: Multipointmore than two devices can share the physical media.
- 127OSI Layer 2. Data Link LayerThe Data Link Layer provides functional and procedural means for connectionless-mode among network-entities, and for connection-mode for the establishment, maintenance, and release data-link connections among network-entities and for the transfer of data-link-service-data-units. A data-link-connection is built upon one or several physical-connections.
- 128Data Link Layer Two most important components of Layer 2.Framing and Addressing
- 129FramingFraming is used to convert the services of the Physical Layer into something more useful. In particular, the Physical layer provides for the transfer of a continuous stream of bits. Bits however, are only meaningful once combined together to form numbers or text, and so the actual start of a logical stream of data needs to be identified.
- 1302. Data Link Layer Framing

- 1312. Data Link Layer AddressingAddressing represents the means by which the sending device is able to identify the intended destination for its transmission.
- 1322. Data Link Layer Addressing

- 133RANRegional Area Network
- 1342. Data Link Layer MAC and LLC

- 135MACMAC refers to the functionality necessary for connecting to, and using a specific type of medium. There are therefore many different MACs defined for different network constructions including: copper media, optical media, and wireless networks. Different MACs are also defined for different network speeds and different network topologies. Fundamentally, the MAC sub-layer decides when and how a device can talk on the medium.
- 136LLCLLC then sits above the MAC sublayer, defining the mechanisms required to provide management of the link, allowing higher-layer protocols to function. Some of the more advanced functionality defined by LLC includes the ability to combine multiple links together into a single logical channel and the ability to secure the link.
- 137LAN Local Area NetworkLANs are typically networks that exist within a relatively small physical area (hence local area).
LANs are usually set up in areas such as a room or building, that are privately owned and operated by an individual, group, or company. - 138Small LANsHomes, Small Businesses, Restaurants, Bank Branch.
Generally consist of only a single network, connecting only 10 or so devices. - 139Large LANsLarge educational institutions for example, will often have many LANs used for different purposes including.
Such large scale deployments usually involve complex architectures and introduce more advanced concepts. - 140Original Ethernet

- 141CollisionIf two devices transmit at the same time, their transmissions will overlap each other causing their transmission to be garbled, in what is known as a collision. This requires that only one device can transmit at any time — otherwise known as half-duplex transmission (devices can send and receive data, but not at the same time).
- 142Carrier Sense Multiple Access with Collision Detection (CSMA/CD)To manage device transmissions and handle collisions, the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) procedure is used, which simplistically:
1. Listens to the medium until there are no transmissions.
2. Begin transmitting the data (Ethernet frame), whilst continuing to listen for other transmissions occurring at the same time.
3. If any other transmissions are detected, a collision has occurred and the device immediately ceases transmitting then waits for a random period of time before restarting at the start of Step 1. - 143Ethernet frames can be sent to one of three types of destination addresses:Unicast address (one-to-one)
Multicast address (one-to-many)
Broadcast address (one-to-all) - 144Unicast address (one-to-one)The destination address represents a single device / interface
- 145Multicast address (one-to-many)The destination address represents a group of devices (zero or more), chosen to receive the multicast frames (the receivers have subscribed to the multicast group)
- 146Broadcast address (one-to-all)A special multicast address which all devices must subscribe to.
- 147Modern EthernetMedia including twisted pair, fibre optics, and twinaxial.
Speeds of up to 400Gbps (IEEE802.3bs).
original IEEE 802.3 distance restricted to maximum length of 500 metres.
Modern allows for 10km distances, with non-standard vendor networks reaching as far as 150km (1000BASE-LHB). - 148Modern Ethernet Star Topology

- 149HubHubs are simple devices.
Require that the network behaves in the same way as the bus topology described above, and are unlikely to be found in use today (newer Ethernet standards do not even support them). - 150SwitchesIsolate the communication with each connecting device, allowing CDMA/CD to be disabled, and enable full duplex communication.
- 151Bridges

- 152BPDUBridge Protocol Data Units
- 153Switches

- 154VLANVirtual LAN
- 155VLAN

- 156TrunkingTrunking allows the traffic from several different VLANs to be aggregated together (combined together) temporarily on a single cable.
- 157Spanning Tree ProtocolSpanning Tree Protocol allows redundant links to be added to the network to improve the robustness of the network — selectively disabling links to remove loops from the network (thereby forming a tree). These links are re-enabled if required, when an active link is disabled.
- 158Hierarchical Network Design

- 159Advantages of Hierarchical Network DesignMaximum Network Diameter
Simplified Network Design
Improved Robustness
Improved Security - 160Switch BehaviorThe default behaviour for a switch is to forward a frame only to its intended destination/s. To achieve this, the switch must first learn where the different devices connected to the network are located.
- 161MAC Address TableA switch achieves this by monitoring the Ethernet frames that pass through them and recording the source address against the line the frame arrived on. Over time, the switch is able to use this information to build a table listing all of the devices on the network and the line on which each device can be reached.
- 162A Switch can make 3 decisions on what to do with a frameForward
Filter
Flood - 163Switch ForwardThe switch has already learned the location of the destination device and forwards the frame out the line where the device is located
- 164Switch FilterFilter - the switch has already learned the location of the destination device, however the frame was received on the line where the destination device is known to exist, so the frame is discarded (destination must have already received the frame)
- 165Switch FloodFlood - the switch is not aware of the location of the destination device, so it forwards the frame out all lines except where the frame came from, i.e., the frame is “flooded” out all other lines.
- 166Exploiting Switches Spoofing

- 167Port Security

- 168MAC addresses - single address - multiple addressesMost devices only have a single MAC address.
Virtualisation and cloud computing can result in devices having more than one MAC address, and technologies such as the Internet of Things could result in many MAC addresses being received on one switch line connecting to a wireless access point. - 169WiFi Standards

- 170Connecting to Wireless Networks

- 171Wireless Challenges

- 172CSMA/CA

- 173Three Network Architectures;Basic Service Set (BSS)
Independent Basic Service Set
Extended Service Set (ESS) - 174BSSBasic Service Set
- 175Basic Service Set

- 176IBSSIndependent Basic Service Set
- 177Independent Basic Service Set

- 178ESSExtended Service Set
- 179Extended Service Set

- 180WLCWireless LAN Controller
- 181LAPLightweight Access Point
- 182WLC and LAPs

- 183Repeaters and Wireless Mesh LANs

- 184Radio WavesWireless networking allows data to be transferred using radio waves transmitted through the open air.
All radio signals share a single spectrum, including many other devices you are familiar with such as radio, television, mobile phones, and the communication systems used by emergency services personnel. - 185ISM Frequency BandsIndustrial, Scientific, and Medical (ISM) frequency bands
Wireless LAN standards operate within globally unlicensed Industrial, Scientific, and Medical (ISM) frequency bands, including the 2.4GHz and 5GHz bands indicated above. - 186WEPWired Equivalent Privacy
- 187Wired Equivalent Privacy (WEP)

- 188RSNRobust Security Network
- 189WPAWiFi Protected Access
- 190TKIPTemporal Key Integrity Protocol
- 191WPA1

- 192WPA2

- 193WPA3

- 194Broadband Networks

- 195POTSPlain Old Telephone Service
- 196DSLDigital Subscriber Line
- 197ADSLAsymmetric Digital Subscriber Line
- 198SDSLSymmetric Digital Subscriber Line
- 199FTTBFibre to the Building
- 200FTTCFibre To The Curb
Information
- Description
- SIT716 - Computer Networks and Security Flashcards on SIT716 - Networks and Security 1, created by Amber Saxon on 15/03/2020.
- Created by
- Amber Saxon
- Views
- 0
- Rating