Flashcards
More 430W
Cards in this deck (18)
- 1For airplanes equipped with certain autopilot systems (not KFC225 or KAP140) autopilots (like 88L). If they have outputs set to flop from GPS to VLOC where does this automatically occur?1.2NM left or right if FAC & 2-15 NM before reaching FAF. It occurs gradually to prevent abrupt CDI changes. Factory default setting is auto.
- 2If you have failed to enter the ILS frequency and/or failed to flop it from standby to active when will you receive a message reminding you to do so?A reminder message displays within 2 NM of FAF.
- 3As you approach IAF inbound on an ILS what can you expect to see in the lower left corner of the screen?LNAV -indicating a CDI scale transition from TERM (1NM) to APP scaling (.3NM). This applies only to the on screen CDI -the external CDI is coupled to the VLOC receiver (variable angular accuracy the closer you approach -typically 2 deg). Additionally, waypoint alert “DTK ### degrees x S” appears in the lower right corner. As you cross it the destination sequences to “RW__”.
- 4Upon crossing the MAP on an ILS DH what happens and what must you do when executing the missed approach?1. “SUSP” appears over OBS key, which you must push to acquire missed procedure sequencing.
2. From indication on default NAV page until OBS is pushed.
3. Push CDI key to toggle from VLOC back to GPS - 5What happens 60 seconds prior to FAF on LPV?Unit checks required Horizontal Alarm Limit (HAL) & Vertical Alarm Limit (VAL) ensuring GPS integrity within limits.
If it fails integrity check, the approach is downgraded to non precision indicated by “LNAV” on moving map, a message and the glide slope will be flagged inactive. - 6One-minute check prior to LPV FAF?1. “No LNAV (map & message) indicated”
2. “No glide slope flag” - 7How is an LP different than an LPV?It’s considered non-precision, is flown similarly to an LNAV but greater precision.
-most have step downs
-some have advisory vertical guidance (LP +V)
Angular scaling tightens closer to 2 deg or .3 NM (whichever is less) & like LPV
-60-second preFAF integrity check (HAL/VAL) - 8How do you select default NAV page?Press & hold CLR key
- 9How do you get to WPT page?1. Default NAV (press/hold CLR key)
2. Large right knob right to WPT
3. Turn small right knob to select desired WPT page (last for user created -10th) - 10Where are the user created waypoint pages?WPT page group includes ten pages. The last one is user created
- 11How do you create a waypoint?1. Default NAV (press/hold CLR key)
2. Large right knob to WPT
3. Turn small right knob to select desired WPT page (last for user created)
4. Press small right knob & use both to enter a name (5 digits) & press ENT. Your present position will appear at bottom.
5. Turn large right knob to highlight “Create?”
6. If it’s some other position, use knobs to correct.
7. Press enter
8. Curser moves to “Create?” -press enter
9. Press small knob to remove cursor. - 12How do you quickly capture present position from the map page?1. Press small right knob to activate panning function.
2. Press ENT to capture the position & display user waypoint page.
3. Four digit name is automatically assigned, turn large right knob to highlight name field & use both to change it then hit enter.
4. Press ENT again when “Create?” displays - 13How do you find the main page groups and what are they?Turn large right knob
1. NAV
2. WPT
3. AUX
4. NRST
Then turn small right knob to find different pages within each group - 14Find nearest centerFour clicks right with large right & 6 clicks right with small right.
- 15Find nearest flight serviceFour clicks right large right & 7 clicks right with small right.
- 16Emergency diversions to nearest airport1. For emergency diversion four clicks right with large right knob to get nearest airport list
2. Press small right knob to activate cursor
3. Turn large right knob to select airport from list
4. Press direct to enter, enter - 17Flight planning functionsThree clicks right large right knob to Aux then turn small right knob to fuel planning, trip planning and density altitude/TAS/Winds.
- 18How do we find utility options?Three clicks right large right and two clicks right with small right. Options are:
Checklists
Flight timers
Trip statistics
RAIM prediction
Sunrise/Sunset
Information
- Description
- Flashcards on More 430W, created by Dan Anderson on 23/05/2020.
- Created by
- Dan Anderson · May 2020
- Updated
- May 23, 2020
- Views
- 2
- Rating